[Wed Jul 18 06:40:37 2012] Detection parameters:
  Position = (252.5, 265.4) = 8 57 58.66 -41 51 47.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.3 +/- 17.3
  Background counts = 37.5
  Rate = 0.003 +/- 0.0004

[Wed Jul 18 06:40:38 2012] Off-axis axis estimate = 4.10'
[Wed Jul 18 10:19:59 2012] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 10:19:59 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Wed Jul 18 10:19:59 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.833
[Wed Jul 18 10:19:59 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.48"
[Wed Jul 18 14:58:04 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src15.ximg exists
[Wed Jul 18 14:58:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src15.csv
[Wed Jul 18 14:58:04 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Jul 18 14:58:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src15.csv
[Wed Jul 18 14:58:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 14:58:06 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Jul 18 14:58:06 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Jul 18 14:58:06 2012] Fit fullrun_mos1_xmm0112870101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Jul 18 19:02:19 2012] Warning, spatial fit 15 centroid is now closest to src. 57
[Wed Jul 18 19:02:19 2012] Spatial fit model total counts = 1298.360000, observed total counts = 1269.000000
[Wed Jul 18 19:02:19 2012] Offset between fit and detection position for source 17 = 3.258429 pixels
[Wed Jul 18 19:02:19 2012] Warning, changing simple spatial fit ID from 15 to 32
[Wed Jul 18 19:02:19 2012] 1314.653000 total counts/ 1116.220000 bgd. counts: snr = 5.939351
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 3.258429 pixels
  Position = (250.8, 268.2) = 8 57 59.33 -41 51 33.0
  Extent = 16.4 (16.4-32.9)", rotation angle = 0
  Source counts = 198.4 +/- 36.3
  Background counts = 1116.2
  Rate = 0.004 +/- 0.0008
[Wed Jul 18 19:02:19 2012] Spatial fit model total counts = 1114.930000, observed total counts = 1082.000000
[Wed Jul 18 19:02:19 2012] Offset between fit and detection position for source 17 = 1.324710 pixels
[Wed Jul 18 19:02:19 2012] Warning, changing simple spatial fit ID from 32 to 51
[Wed Jul 18 19:02:19 2012] 1044.600000 total counts/ 819.605000 bgd. counts: snr = 7.859059
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.324710 pixels
  Position = (250.4, 266.9) = 8 57 59.49 -41 51 38.5
  Extent = 17.1 (17.0-34.1)", rotation angle = 0
  Source counts = 225.0 +/- 32.3
  Background counts = 819.6
  Rate = 0.005 +/- 0.0007
[Wed Jul 18 19:02:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 19:02:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 19:02:19 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 19:02:19 2012] Source does appear to be extended
[Wed Jul 18 19:02:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 19:02:19 2012] Source is confused with source 61
[Wed Jul 18 19:02:19 2012] Source is confused with source 59
[Wed Jul 18 19:02:19 2012] Source is confused with source 56
[Wed Jul 18 19:02:19 2012] Source is confused with source 57
[Wed Jul 18 19:02:19 2012] Source is confused with source 64
[Wed Jul 18 19:02:19 2012] Source is confused with source 60
[Wed Jul 18 22:23:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 22:23:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 22:23:04 2012] Initial guess for spatial extent in simple fitting = 17.06"
[Wed Jul 18 22:23:04 2012] source mask rpix=3.9, npix_max = 78, mask sum = 67, frac = 0.857
[Wed Jul 18 22:23:04 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 17.06"
[Thu Jul 19 01:59:06 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jul 19 01:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src11.csv
[Thu Jul 19 01:59:06 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jul 19 01:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src11.csv
[Thu Jul 19 01:59:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 01:59:07 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jul 19 01:59:07 2012] fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jul 19 01:59:07 2012] Fit fullrun_mos1_xmm0112870101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Jul 19 04:52:47 2012] Warning, spatial fit 11 centroid is now closest to src. 65
[Thu Jul 19 04:52:47 2012] Spatial fit model total counts = 2265.840000, observed total counts = 2220.000000
[Thu Jul 19 04:52:47 2012] Offset between fit and detection position for source 17 = 2.618003 pixels
[Thu Jul 19 04:52:47 2012] Warning, changing simple spatial fit ID from 11 to 25
[Thu Jul 19 04:52:47 2012] 2313.832000 total counts/ 2037.030000 bgd. counts: snr = 6.132965
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.618003 pixels
  Position = (248.2, 265.4) = 8 58 0.32 -41 51 45.1
  Extent = 20.8 (16.6-27.8)", rotation angle = 0
  Source counts = 276.8 +/- 48.1
  Background counts = 2037.0
  Rate = 0.006 +/- 0.001
[Thu Jul 19 04:52:47 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:52:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:52:47 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 04:52:47 2012] Source does appear to be extended
[Thu Jul 19 04:52:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 07:32:03 2012] XMMSAS src. selection expression = ellipse(21548.660000, 23043.176000, 1245.900036, 1245.900036, 0.000000, X, Y)
[Thu Jul 19 07:32:03 2012] Writing source region out to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src17_src.reg
[Thu Jul 19 07:32:03 2012] Extracting stamp from image fullrun_mos1_xmm0112870101_pi300-10000_cl_sm2.00.img.gz, (177, 194) - (320, 337)
[Thu Jul 19 07:32:03 2012] XMMSAS bgd. selection expression = annulus(21548.660000, 23043.176000, 2076.500060, 4153.000120, X, Y) && !ellipse(25330.414400, 24723.576600, 363.732010, 363.732010, 0.000000, X, Y) && !ellipse(21034.720000, 22392.012000, 335.670410, 335.670410, 0.000000, X, Y) && !ellipse(22735.972000, 24226.370000, 2710.776078, 2710.776078, 0.000000, X, Y) && !ellipse(23565.042000, 23352.586000, 2442.368070, 2442.368070, 0.000000, X, Y) && !ellipse(24406.908000, 25407.818000, 2307.984066, 2307.984066, 0.000000, X, Y) && !ellipse(21049.002655, 22005.842026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25454.158234, 25539.432465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21306.432968, 22912.883667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23092.846863, 25090.079376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21655.210000, 23448.248000, 1317.384038, 1317.384038, 0.000000, X, Y) && !ellipse(25455.137939, 26397.622894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22702.788200, 22361.216000, 1137.008033, 1137.008033, 0.000000, X, Y) && !ellipse(24629.628000, 26401.216000, 830.176024, 830.176024, 0.000000, X, Y) && !ellipse(24315.835663, 24925.398529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23346.412781, 24490.316223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22101.510000, 23909.418000, 1349.200039, 1349.200039, 0.000000, X, Y) && !ellipse(22128.272000, 23472.990000, 1356.712039, 1356.712039, 0.000000, X, Y) && !ellipse(26249.878479, 26824.256897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23504.787933, 25878.577942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23429.940000, 26145.929400, 1159.056033, 1159.056033, 0.000000, X, Y) && !ellipse(18373.408829, 20813.059494, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25174.635000, 27600.038780, 1148.808033, 253.257607, 158.953000, X, Y) && !ellipse(25240.366000, 27519.256000, 1162.936033, 1162.936033, 0.000000, X, Y) && !ellipse(22695.940000, 22555.788000, 2221.840064, 2221.840064, 0.000000, X, Y) && !ellipse(25921.310638, 24923.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22037.399704, 22695.898743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24334.803192, 27177.580231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22964.577087, 25516.110687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22938.151400, 21100.356000, 1376.288040, 1376.288040, 0.000000, X, Y) && !ellipse(25242.592224, 26820.287628, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 07:32:03 2012] Writing fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src17.gif
[Thu Jul 19 07:47:19 2012] Mean detx,y = (-1614.31, 3708.30) 
[Thu Jul 19 07:47:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 07:47:48 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 07:47:48 2012] Setting source spectrum file to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jul 19 07:47:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Jul 19 14:41:25 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:41:26 2012] Error reading totcts from fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jul 19 14:41:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:41:26 2012] Using photon index=1.80, rate=0.00578, arf fullrun_mos1_xmm0112870101_pi300-10000_pass1_cl_src17.arf
[Thu Jul 19 14:41:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:41:26 2012] Updating source flux to 5.4e-14
[Thu Jul 19 14:41:30 2012] Flag c found in src. 17 procflags, skipping spectral fitting