[Thu Jun 13 22:47:15 2013] Detection parameters:
  Position = (109.7, 241.3) = 15 27 24.12 51 31 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.7 +/- 18.9
  Background counts = 95.4
  Rate = 0.02 +/- 0.005

[Thu Jun 13 22:47:15 2013] Off-axis axis estimate = 14.30'
[Thu Jun 13 22:49:35 2013] Using EEF radius (= 13.58 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 22:49:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 22:49:35 2013] Initial guess for spatial extent in simple fitting = 13.58"
[Thu Jun 13 22:49:35 2013] source mask rpix=3.1, npix_max = 52, mask sum = 31, frac = 0.591
[Thu Jun 13 22:49:35 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 13.58"
[Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src28.ximg exists
[Fri Jun 14 00:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src28.csv
[Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Jun 14 00:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src28.csv
[Fri Jun 14 00:30:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Jun 14 00:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Jun 14 00:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Jun 14 00:30:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:12:27 2013] Warning, spatial fit 28 centroid is now closest to src. 30
[Fri Jun 14 01:12:27 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 01:12:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 01:12:27 2013] Assessing source extent using major
[Fri Jun 14 01:12:27 2013] Source does appear to be extended
[Fri Jun 14 01:12:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 01:12:27 2013] Source is confused with source 1
[Fri Jun 14 01:12:36 2013] Using EEF radius (= 13.58 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:12:36 2013] Initial guess for spatial extent in simple fitting = 13.58"
[Fri Jun 14 01:12:36 2013] source mask rpix=3.1, npix_max = 52, mask sum = 31, frac = 0.591
[Fri Jun 14 01:12:36 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 13.58"
[Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src26.ximg exists
[Fri Jun 14 03:25:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src26.csv
[Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Jun 14 03:25:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src26.csv
[Fri Jun 14 03:25:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 03:25:15 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Jun 14 03:25:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Jun 14 03:25:15 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Jun 14 03:25:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Jun 14 03:25:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 03:59:46 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 29.629321 pixels away
[Fri Jun 14 03:59:46 2013] Spatial fit model total counts = 1600.190000, observed total counts = 1475.000000
[Fri Jun 14 03:59:46 2013] Offset between fit and detection position for source 29 = 0.618424 pixels
[Fri Jun 14 03:59:46 2013] Warning, changing simple spatial fit ID from 26 to 24
[Fri Jun 14 03:59:46 2013] 1626.186000 total counts/ 1030.940000 bgd. counts: snr = 18.538722
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.618424 pixels
  Position = (110.0, 240.7) = 15 27 24.00 51 30 56.7
  Extent = 39.9 (39.9-79.9)", rotation angle = 0
  Source counts = 595.2 +/- 40.3
  Background counts = 1030.9
  Rate = 0.8 +/- 0.05
[Fri Jun 14 03:59:46 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 03:59:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 03:59:46 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 03:59:46 2013] Source does appear to be extended
[Fri Jun 14 03:59:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 03:59:55 2013] XMMSAS src. selection expression = ellipse(9517.602000, 20896.096000, 2395.674069, 2395.674069, 0.000000, X, Y)
[Fri Jun 14 03:59:55 2013] Writing source region out to fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src29_src.reg
[Fri Jun 14 03:59:55 2013] Extracting stamp from image fullrun_pn_xmm0112860301_pi300-10000_cl_sm2.00.img.gz, (0, 103) - (248, 378)
[Fri Jun 14 03:59:55 2013] XMMSAS bgd. selection expression = annulus(9517.602000, 20896.096000, 3992.790115, 7985.580230, X, Y) && !ellipse(9472.780000, 21338.926400, 2121.120061, 1038.096030, 16.060000, X, Y) && !ellipse(11098.870163, 21703.801910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17536.264816, 24311.892944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16621.756000, 24225.357800, 1690.832049, 1329.928038, 96.925000, X, Y) && !ellipse(14643.348400, 23574.078000, 1789.520051, 824.848024, 341.221000, X, Y) && !ellipse(14812.020233, 23270.465668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13568.871796, 23004.591034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12871.003983, 22784.351044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12008.380000, 22255.844000, 778.333622, 778.333622, 0.000000, X, Y) && !ellipse(13222.430298, 22415.023193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13837.493800, 22347.145800, 1877.912054, 1877.912054, 0.000000, X, Y) && !ellipse(11613.430771, 21805.455017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13033.770554, 21636.934998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10150.892616, 21437.760010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11562.541824, 21087.108963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9999.222076, 20390.870010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10816.171272, 18449.918808, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 03:59:55 2013] Writing fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src29.gif
[Fri Jun 14 04:13:11 2013] Mean detx,y = (-17121.79, 130.31) 
[Fri Jun 14 04:13:13 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 04:14:52 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 04:14:52 2013] Setting source spectrum file to fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jun 14 04:14:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Jun 14 04:51:06 2013] Updating aperture counts using extracted products
[Fri Jun 14 04:51:06 2013] Total counts from fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 2230.00
[Fri Jun 14 04:51:06 2013] Total counts from fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src29_bgd.pi.gz = 13428.00
[Fri Jun 14 04:51:06 2013] Got source and background scale factors 9306205.000000, 61368596.000000
[Fri Jun 14 04:51:06 2013] User source parameters:
  Position = (110.0, 240.7) = 15 27 24.00 51 30 56.7
  Extent = 39.9 (39.9-79.9)", rotation angle = 0
  Source aperture counts = 193.7 +/- 48.2
  Background aperture counts = 2036.3
  Rate = 0.3 +/- 0.06

[Fri Jun 14 04:51:09 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 04:51:09 2013] Using photon index=1.80, rate=0.772, arf fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src29.arf
[Fri Jun 14 04:51:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 04:51:09 2013] Updating source flux to 8.3e-12
[Fri Jun 14 04:51:14 2013] Flag c found in src. 29 procflags, skipping spectral fitting
[Fri Jun 14 04:51:18 2013] xmm0112860301/analysis//spectral/fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete