[Thu Jun 13 22:47:14 2013] Detection parameters:
  Position = (157.9, 257.2) = 15 27 1.68 51 32 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.3 +/- 22.7
  Background counts = 138.9
  Rate = 0.03 +/- 0.006

[Thu Jun 13 22:47:15 2013] Off-axis axis estimate = 10.62'
[Thu Jun 13 22:49:35 2013] Using EEF radius (= 11.74 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 22:49:35 2013] Initial guess for spatial extent in simple fitting = 11.74"
[Thu Jun 13 22:49:35 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.880
[Thu Jun 13 22:49:35 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 11.74"
[Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src22.ximg exists
[Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri Jun 14 00:30:41 2013] Fit fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src22 appears to have run properly
[Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Jun 14 00:30:41 2013] Fit fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Fri Jun 14 01:12:27 2013] Source 23 is offset by -1.127505 and 5.252978 pixels which is larger than
2 X fitted extent = 1.381398 x 1.381398, not incorporating fit results
[Fri Jun 14 01:12:27 2013] Spatial fit model total counts = 786.926000, observed total counts = 745.000000
[Fri Jun 14 01:12:27 2013] Offset between fit and detection position for source 23 = 1.699658 pixels
[Fri Jun 14 01:12:27 2013] 764.118000 total counts/ 568.024000 bgd. counts: snr = 8.227748
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.699658 pixels
  Position = (159.6, 257.4) = 15 27 0.89 51 32 10.2
  Extent = 23.5 (23.4-46.9)", rotation angle = 0
  Source counts = 196.1 +/- 27.6
  Background counts = 568.0
  Rate = 0.3 +/- 0.04
[Fri Jun 14 01:12:27 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 01:12:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 01:12:27 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 01:12:27 2013] Source does appear to be extended
[Fri Jun 14 01:12:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 01:12:27 2013] Source is confused with source 19
[Fri Jun 14 01:12:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:12:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 01:12:36 2013] Initial guess for spatial extent in simple fitting = 23.47"
[Fri Jun 14 01:12:36 2013] source mask rpix=5.4, npix_max = 139, mask sum = 124, frac = 0.892
[Fri Jun 14 01:12:36 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 23.47"
[Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src20.ximg exists
[Fri Jun 14 03:25:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src20.csv
[Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Jun 14 03:25:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src20.csv
[Fri Jun 14 03:25:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Jun 14 03:25:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Jun 14 03:25:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Jun 14 03:25:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 03:59:46 2013] Warning, spatial fit 20 centroid is now closest to src. 25
[Fri Jun 14 03:59:46 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 03:59:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 03:59:46 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 03:59:46 2013] Source does appear to be extended
[Fri Jun 14 03:59:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 03:59:55 2013] XMMSAS src. selection expression = ellipse(13837.493800, 22347.145800, 1408.434041, 1408.434041, 0.000000, X, Y)
[Fri Jun 14 03:59:55 2013] Writing source region out to fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src23_src.reg
[Fri Jun 14 03:59:55 2013] Extracting stamp from image fullrun_pn_xmm0112860301_pi300-10000_cl_sm2.00.img.gz, (79, 176) - (241, 338)
[Fri Jun 14 03:59:55 2013] XMMSAS bgd. selection expression = annulus(13837.493800, 22347.145800, 2347.390068, 4694.780135, X, Y) && !ellipse(9472.780000, 21338.926400, 2121.120061, 1038.096030, 16.060000, X, Y) && !ellipse(11098.870163, 21703.801910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17536.264816, 24311.892944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16621.756000, 24225.357800, 1690.832049, 1329.928038, 96.925000, X, Y) && !ellipse(14643.348400, 23574.078000, 1789.520051, 824.848024, 341.221000, X, Y) && !ellipse(14812.020233, 23270.465668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13568.871796, 23004.591034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12871.003983, 22784.351044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12008.380000, 22255.844000, 778.333622, 778.333622, 0.000000, X, Y) && !ellipse(13222.430298, 22415.023193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11613.430771, 21805.455017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13033.770554, 21636.934998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10150.892616, 21437.760010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11562.541824, 21087.108963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9517.602000, 20896.096000, 3194.232092, 3194.232092, 0.000000, X, Y) && !ellipse(9999.222076, 20390.870010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18830.272995, 19276.165253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10816.171272, 18449.918808, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 03:59:55 2013] Writing fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src23.gif
[Fri Jun 14 04:10:52 2013] Mean detx,y = (-13623.24, 141.65) 
[Fri Jun 14 04:10:54 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 04:11:38 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 04:11:39 2013] Setting source spectrum file to fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jun 14 04:11:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Jun 14 04:51:05 2013] Updating aperture counts using extracted products
[Fri Jun 14 04:51:05 2013] Total counts from fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 1859.00
[Fri Jun 14 04:51:05 2013] Total counts from fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src23_bgd.pi.gz = 8099.00
[Fri Jun 14 04:51:05 2013] Got source and background scale factors 5417231.000000, 31352067.000000
[Fri Jun 14 04:51:05 2013] User source parameters:
  Position = (159.6, 257.4) = 15 27 0.89 51 32 10.2
  Extent = 23.5 (23.4-46.9)", rotation angle = 0
  Source aperture counts = 459.6 +/- 44.1
  Background aperture counts = 1399.4
  Rate = 0.6 +/- 0.06

[Fri Jun 14 04:51:08 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 04:51:08 2013] Using photon index=1.80, rate=0.254, arf fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src23.arf
[Fri Jun 14 04:51:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 04:51:09 2013] Updating source flux to 1.5e-12
[Fri Jun 14 04:51:14 2013] Flag b found in src. 23 procflags, skipping spectral fitting
[Fri Jun 14 04:51:14 2013] Flag c found in src. 23 procflags, skipping spectral fitting
[Fri Jun 14 04:51:18 2013] xmm0112860301/analysis//spectral/fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete