[Thu Jun 13 22:47:14 2013] Detection parameters: Position = (170.8, 268.0) = 15 26 55.69 51 32 56.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 106.0 +/- 21.5 Background counts = 142.4 Rate = 0.03 +/- 0.006 [Thu Jun 13 22:47:15 2013] Off-axis axis estimate = 9.51' [Thu Jun 13 22:49:35 2013] Using EEF radius (= 11.18 ")to estimate initial spatial extent for simple fitting [Thu Jun 13 22:49:35 2013] Initial guess for spatial extent in simple fitting = 11.18" [Thu Jun 13 22:49:35 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954 [Thu Jun 13 22:49:35 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 11.18" [Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src16.ximg exists [Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src16_1.ximg exists [Fri Jun 14 00:30:41 2013] Fit fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src16 appears to have run properly [Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists [Fri Jun 14 00:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src16.csv [Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists [Fri Jun 14 00:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src16.csv [Fri Jun 14 00:30:41 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 14 01:12:27 2013] Warning, spatial fit 16 centroid is now closest to src. 16 [Fri Jun 14 01:12:27 2013] Vigneting correction estimate = 1.000000 [Fri Jun 14 01:12:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 14 01:12:27 2013] Assessing source extent using major [Fri Jun 14 01:12:27 2013] Source does appear to be extended [Fri Jun 14 01:12:27 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 14 01:12:27 2013] Source is confused with source 16 [Fri Jun 14 01:12:36 2013] Using EEF radius (= 11.18 ")to estimate initial spatial extent for simple fitting [Fri Jun 14 01:12:36 2013] Initial guess for spatial extent in simple fitting = 11.18" [Fri Jun 14 01:12:36 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954 [Fri Jun 14 01:12:36 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 11.18" [Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src15.ximg exists [Fri Jun 14 03:25:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src15.csv [Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src15_1.ximg exists [Fri Jun 14 03:25:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src15.csv [Fri Jun 14 03:25:14 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists [Fri Jun 14 03:25:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src15.csv [Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists [Fri Jun 14 03:25:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src15.csv [Fri Jun 14 03:25:14 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 14 03:59:46 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 19.513197 pixels away [Fri Jun 14 03:59:46 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 14.019347 pixels away [Fri Jun 14 03:59:46 2013] Source 17 is offset by 7.354462 and -1.422027 pixels which is larger than 2 X fitted extent = 1.369517 x 1.369517, not incorporating fit results [Fri Jun 14 03:59:46 2013] Vigneting correction estimate = 1.000000 [Fri Jun 14 03:59:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 14 03:59:46 2013] Assessing source extent using major [Fri Jun 14 03:59:46 2013] Source does appear to be extended [Fri Jun 14 03:59:46 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 14 03:59:55 2013] XMMSAS src. selection expression = ellipse(14812.020233, 23270.465668, 652.500000, 652.500000, 0.000000, X, Y) [Fri Jun 14 03:59:55 2013] Writing source region out to fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src17_src.reg [Fri Jun 14 03:59:55 2013] Extracting stamp from image fullrun_pn_xmm0112860301_pi300-10000_cl_sm2.00.img.gz, (133, 231) - (208, 306) [Fri Jun 14 03:59:55 2013] XMMSAS bgd. selection expression = annulus(14812.020233, 23270.465668, 1087.500000, 2175.000000, X, Y) && !ellipse(17536.264816, 24311.892944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16621.756000, 24225.357800, 1690.832049, 1329.928038, 96.925000, X, Y) && !ellipse(14643.348400, 23574.078000, 1789.520051, 824.848024, 341.221000, X, Y) && !ellipse(13568.871796, 23004.591034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12871.003983, 22784.351044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12008.380000, 22255.844000, 778.333622, 778.333622, 0.000000, X, Y) && !ellipse(13222.430298, 22415.023193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13837.493800, 22347.145800, 1877.912054, 1877.912054, 0.000000, X, Y) && !ellipse(13033.770554, 21636.934998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9517.602000, 20896.096000, 3194.232092, 3194.232092, 0.000000, X, Y) [Fri Jun 14 03:59:55 2013] Writing fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src17.gif [Fri Jun 14 04:08:48 2013] Mean detx,y = (-12300.31, -394.23) [Fri Jun 14 04:08:50 2013] Setting backscal keywords in source and bgd. spectrum [Fri Jun 14 04:09:06 2013] Binned source spectrum to 10 counts/bin [Fri Jun 14 04:09:06 2013] Setting source spectrum file to fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src17_src_b10.pi.gz [Fri Jun 14 04:09:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src17_bgd.pi.gz [Fri Jun 14 04:34:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri Jun 14 04:34:49 2013] rmf not generated due to insufficient counts [Fri Jun 14 04:51:04 2013] Updating aperture counts using extracted products [Fri Jun 14 04:51:04 2013] Total counts from fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 466.00 [Fri Jun 14 04:51:04 2013] Total counts from fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src17_bgd.pi.gz = 633.00 [Fri Jun 14 04:51:04 2013] Got source and background scale factors 1287406.000000, 2956122.000000 [Fri Jun 14 04:51:04 2013] User source parameters: Position = (170.8, 268.0) = 15 26 55.69 51 32 56.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 190.3 +/- 22.6 Background aperture counts = 275.7 Rate = 0.2 +/- 0.03 [Fri Jun 14 04:51:04 2013] Updating counts from extracted products [Fri Jun 14 04:51:04 2013] Set source signif. to 190.33/16.60 = 11.46 [Fri Jun 14 04:51:08 2013] Calculating source flux in energy range 0.30-8.00 [Fri Jun 14 04:51:08 2013] Using photon index=1.80, rate=0.247, arf fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src17.arf [Fri Jun 14 04:51:08 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jun 14 04:51:08 2013] Updating source flux to 1.5e-12 [Fri Jun 14 04:51:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri Jun 14 04:51:18 2013] xmm0112860301/analysis//spectral/fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete