[Thu Jun 13 22:47:14 2013] Detection parameters:
  Position = (186.4, 276.4) = 15 26 48.43 51 33 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.8 +/- 20.4
  Background counts = 161.8
  Rate = 0.03 +/- 0.005

[Thu Jun 13 22:47:15 2013] Off-axis axis estimate = 8.28'
[Thu Jun 13 22:49:35 2013] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 22:49:35 2013] Initial guess for spatial extent in simple fitting = 10.57"
[Thu Jun 13 22:49:35 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.049
[Thu Jun 13 22:49:35 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.57"
[Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src14.ximg exists
[Fri Jun 14 00:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src14.csv
[Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Jun 14 00:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src14.csv
[Fri Jun 14 00:30:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Jun 14 00:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Jun 14 00:30:41 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Jun 14 00:30:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Jun 14 00:30:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:12:27 2013] Source 15 is offset by -1.414769 and -8.667197 pixels which is larger than
2 X fitted extent = 1.214676 x 1.214676, not incorporating fit results
[Fri Jun 14 01:12:27 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 01:12:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 01:12:27 2013] Assessing source extent using major
[Fri Jun 14 01:12:27 2013] Source does appear to be extended
[Fri Jun 14 01:12:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 01:12:36 2013] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:12:36 2013] Initial guess for spatial extent in simple fitting = 10.57"
[Fri Jun 14 01:12:36 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.049
[Fri Jun 14 01:12:36 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.57"
[Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jun 14 03:25:14 2013] Fit fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_src13 appears to have run properly
[Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jun 14 03:25:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jun 14 03:25:14 2013] fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jun 14 03:25:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jun 14 03:25:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 03:59:46 2013] Spatial fit model total counts = 642.838000, observed total counts = 588.000000
[Fri Jun 14 03:59:46 2013] Offset between fit and detection position for source 15 = 5.828725 pixels
[Fri Jun 14 03:59:46 2013] 608.240000 total counts/ 394.703000 bgd. counts: snr = 10.748254
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 5.828725 pixels
  Position = (191.6, 279.0) = 15 26 46.00 51 33 44.5
  Extent = 21.1 (21.1-42.3)" x 16.6 (8.7-21.1)", rotation angle = 97 (90-90) degrees
  Source counts = 213.5 +/- 24.7
  Background counts = 394.7
  Rate = 0.3 +/- 0.03
[Fri Jun 14 03:59:46 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 03:59:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 03:59:46 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 03:59:46 2013] Source does appear to be extended
[Fri Jun 14 03:59:46 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Fri Jun 14 03:59:46 2013] Source is confused with source 14
[Fri Jun 14 03:59:55 2013] XMMSAS src. selection expression = ellipse(16621.756000, 24225.357800, 1268.124036, 997.446029, 96.925000, X, Y)
[Fri Jun 14 03:59:55 2013] Writing source region out to fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src15_src.reg
[Fri Jun 14 03:59:55 2013] Extracting stamp from image fullrun_pn_xmm0112860301_pi300-10000_cl_sm2.00.img.gz, (119, 206) - (264, 352)
[Fri Jun 14 03:59:55 2013] XMMSAS bgd. selection expression = annulus(16621.756000, 24225.357800, 2113.540061, 4227.080122, X, Y) && !ellipse(17536.264816, 24311.892944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14643.348400, 23574.078000, 1789.520051, 824.848024, 341.221000, X, Y) && !ellipse(14812.020233, 23270.465668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13568.871796, 23004.591034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12871.003983, 22784.351044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12008.380000, 22255.844000, 778.333622, 778.333622, 0.000000, X, Y) && !ellipse(13222.430298, 22415.023193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13837.493800, 22347.145800, 1877.912054, 1877.912054, 0.000000, X, Y) && !ellipse(11613.430771, 21805.455017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13033.770554, 21636.934998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11562.541824, 21087.108963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9517.602000, 20896.096000, 3194.232092, 3194.232092, 0.000000, X, Y) && !ellipse(18830.272995, 19276.165253, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 03:59:55 2013] Writing fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src15.gif
[Fri Jun 14 04:07:05 2013] Mean detx,y = (-10278.57, -370.36) 
[Fri Jun 14 04:07:08 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 04:07:56 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 04:07:57 2013] Setting source spectrum file to fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun 14 04:07:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Jun 14 04:51:04 2013] Updating aperture counts using extracted products
[Fri Jun 14 04:51:04 2013] Total counts from fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 1129.00
[Fri Jun 14 04:51:04 2013] Total counts from fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src15_bgd.pi.gz = 7894.00
[Fri Jun 14 04:51:04 2013] Got source and background scale factors 3434985.000000, 30790854.000000
[Fri Jun 14 04:51:04 2013] User source parameters:
  Position = (191.6, 279.0) = 15 26 46.00 51 33 44.5
  Extent = 21.1 (21.1-42.3)" x 16.6 (8.7-21.1)", rotation angle = 97 (90-90) degrees
  Source aperture counts = 248.4 +/- 34.6
  Background aperture counts = 880.6
  Rate = 0.3 +/- 0.04

[Fri Jun 14 04:51:08 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 04:51:08 2013] Using photon index=1.80, rate=0.277, arf fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src15.arf
[Fri Jun 14 04:51:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 04:51:08 2013] Updating source flux to 1.3e-12
[Fri Jun 14 04:51:14 2013] Flag b found in src. 15 procflags, skipping spectral fitting
[Fri Jun 14 04:51:14 2013] Flag c found in src. 15 procflags, skipping spectral fitting
[Fri Jun 14 04:51:18 2013] xmm0112860301/analysis//spectral/fullrun_pn_xmm0112860301_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete