[Thu Jun 13 22:47:48 2013] Detection parameters:
  Position = (337.1, 121.4) = 15 25 38.19 51 22 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.6 +/- 10.9
  Background counts = 27.2
  Rate = 0.005 +/- 0.001

[Thu Jun 13 22:47:48 2013] Off-axis axis estimate = 13.14'
[Fri Jun 14 00:31:55 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 00:31:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 00:31:55 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Fri Jun 14 00:31:55 2013] source mask rpix=3.0, npix_max = 48, mask sum = 39, frac = 0.801
[Fri Jun 14 00:31:55 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 13.00"
[Fri Jun 14 01:12:18 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun 14 01:12:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src7.csv
[Fri Jun 14 01:12:18 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun 14 01:12:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src7.csv
[Fri Jun 14 01:12:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:12:18 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun 14 01:12:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Jun 14 01:12:18 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun 14 01:12:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Jun 14 01:12:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:12:27 2013] Warning, spatial fit 21 centroid is now closest to src. 20
[Fri Jun 14 01:12:27 2013] Warning, spatial fit 26 centroid is now closest to src. 30
[Fri Jun 14 01:12:29 2013] Source 6 is offset by -3.581492 and 5.099428 pixels which is larger than
2 X fitted extent = 1.464437 x 1.464437, not incorporating fit results
[Fri Jun 14 01:12:29 2013] Warning, spatial fit 7 centroid is now closest to src. 3
[Fri Jun 14 01:12:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 01:12:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 01:12:29 2013] Assessing source extent using major
[Fri Jun 14 01:12:29 2013] Source does appear to be extended
[Fri Jun 14 01:12:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 03:26:50 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 03:26:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 03:26:50 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Fri Jun 14 03:26:50 2013] source mask rpix=3.0, npix_max = 48, mask sum = 39, frac = 0.801
[Fri Jun 14 03:26:50 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 13.00"
[Fri Jun 14 03:59:38 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun 14 03:59:38 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun 14 03:59:38 2013] Fit fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_src7 appears to have run properly
[Fri Jun 14 03:59:38 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun 14 03:59:38 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun 14 03:59:38 2013] Fit fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jun 14 03:59:46 2013] Warning, spatial fit 24 centroid is now closest to src. 29
[Fri Jun 14 03:59:46 2013] Warning, spatial fit 26 centroid is now closest to src. 2
[Fri Jun 14 03:59:48 2013] Source 6 is offset by -2.800852 and -2.149767 pixels which is larger than
2 X fitted extent = 5.001333 x 1.466069, not incorporating fit results
[Fri Jun 14 03:59:48 2013] Warning, spatial fit 7 centroid is now closest to src. 3
[Fri Jun 14 03:59:48 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 03:59:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 03:59:48 2013] Assessing source extent using major
[Fri Jun 14 03:59:48 2013] Source does appear to be extended
[Fri Jun 14 03:59:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 04:48:06 2013] XMMSAS src. selection expression = ellipse(29282.158234, 10511.902260, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 04:48:06 2013] Writing source region out to fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src6_src.reg
[Fri Jun 14 04:48:06 2013] Extracting stamp from image fullrun_mos2_xmm0112860301_pi300-10000_cl_sm2.00.img.gz, (300, 84) - (375, 159)
[Fri Jun 14 04:48:06 2013] XMMSAS bgd. selection expression = annulus(29282.158234, 10511.902260, 1087.500000, 2175.000000, X, Y) && !ellipse(28614.256409, 11008.986801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28560.571716, 10384.914864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29621.840027, 11191.914337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28743.720947, 11664.432556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30116.323303, 10822.170975, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 04:48:06 2013] Writing fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src6.gif
[Fri Jun 14 04:49:34 2013] Mean detx,y = (3690.50, -17052.00) 
[Fri Jun 14 04:49:35 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 04:49:46 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 04:49:46 2013] Setting source spectrum file to fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 14 04:49:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jun 14 04:50:26 2013] Not generating rmf since there are only 48 counts
[Fri Jun 14 04:50:26 2013] rmf not generated due to insufficient counts
[Fri Jun 14 04:51:10 2013] Updating aperture counts using extracted products
[Fri Jun 14 04:51:10 2013] Total counts from fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 2.00
[Fri Jun 14 04:51:10 2013] Total counts from fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src6_bgd.pi.gz = 4.00
[Fri Jun 14 04:51:10 2013] Got source and background scale factors 891900.000000, 2158273.000000
[Fri Jun 14 04:51:10 2013] User source parameters:
  Position = (337.1, 121.4) = 15 25 38.19 51 22 12.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 0.3 +/- 2.7
  Background aperture counts = 1.7
  Rate = 0.0005 +/- 0.004

[Fri Jun 14 04:51:10 2013] Updating counts from extracted products
[Fri Jun 14 04:51:10 2013] Set source signif. to 0.35/1.29 = 0.27
[Fri Jun 14 04:51:11 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 04:51:11 2013] Using photon index=1.80, rate=0.000523, arf fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src6.arf
[Fri Jun 14 04:51:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 04:51:11 2013] Updating source flux to 2e-14
[Fri Jun 14 04:51:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 04:51:14 2013] xmm0112860301/analysis//spectral/fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete