[Thu Jun 13 22:47:48 2013] Detection parameters: Position = (330.9, 134.6) = 15 25 41.06 51 23 18.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 62.5 +/- 14.2 Background counts = 41.8 Rate = 0.006 +/- 0.001 [Thu Jun 13 22:47:48 2013] Off-axis axis estimate = 12.11' [Fri Jun 14 00:31:55 2013] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting [Fri Jun 14 00:31:55 2013] Initial guess for spatial extent in simple fitting = 12.48" [Fri Jun 14 00:31:55 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.925 [Fri Jun 14 00:31:55 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.48" [Fri Jun 14 01:12:17 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src5.ximg exists [Fri Jun 14 01:12:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src5.csv [Fri Jun 14 01:12:17 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src5_1.ximg exists [Fri Jun 14 01:12:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src5.csv [Fri Jun 14 01:12:17 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 14 01:12:18 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Fri Jun 14 01:12:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src5.csv [Fri Jun 14 01:12:18 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Fri Jun 14 01:12:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src5.csv [Fri Jun 14 01:12:18 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 14 01:12:29 2013] Warning, spatial fit 5 centroid is now closest to src. 2 [Fri Jun 14 01:12:29 2013] Source 3 is offset by -3.140909 and -3.282614 pixels which is larger than 2 X fitted extent = 1.489251 x 1.489251, not incorporating fit results [Fri Jun 14 01:12:29 2013] Source 3 is offset by 5.897482 and 0.678995 pixels which is larger than 2 X fitted extent = 1.494051 x 1.494051, not incorporating fit results [Fri Jun 14 01:12:29 2013] Vigneting correction estimate = 1.000000 [Fri Jun 14 01:12:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 14 01:12:29 2013] Assessing source extent using major [Fri Jun 14 01:12:29 2013] Source does appear to be extended [Fri Jun 14 01:12:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 14 03:26:50 2013] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting [Fri Jun 14 03:26:50 2013] Initial guess for spatial extent in simple fitting = 12.48" [Fri Jun 14 03:26:50 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.925 [Fri Jun 14 03:26:50 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 12.48" [Fri Jun 14 03:59:38 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_src5.ximg exists [Fri Jun 14 03:59:38 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_src5_1.ximg exists [Fri Jun 14 03:59:38 2013] Fit fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_src5 appears to have run properly [Fri Jun 14 03:59:38 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Fri Jun 14 03:59:38 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Fri Jun 14 03:59:38 2013] Fit fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Fri Jun 14 03:59:48 2013] Warning, spatial fit 5 centroid is now closest to src. 2 [Fri Jun 14 03:59:48 2013] Source 3 is offset by 5.897482 and 0.678995 pixels which is larger than 2 X fitted extent = 1.494051 x 1.494051, not incorporating fit results [Fri Jun 14 03:59:48 2013] Vigneting correction estimate = 1.000000 [Fri Jun 14 03:59:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 14 03:59:48 2013] Assessing source extent using major [Fri Jun 14 03:59:48 2013] Source does appear to be extended [Fri Jun 14 03:59:48 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 14 04:48:06 2013] XMMSAS src. selection expression = ellipse(28743.720947, 11664.432556, 652.500000, 652.500000, 0.000000, X, Y) [Fri Jun 14 04:48:06 2013] Writing source region out to fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src3_src.reg [Fri Jun 14 04:48:06 2013] Extracting stamp from image fullrun_mos2_xmm0112860301_pi300-10000_cl_sm2.00.img.gz, (293, 97) - (368, 172) [Fri Jun 14 04:48:06 2013] XMMSAS bgd. selection expression = annulus(28743.720947, 11664.432556, 1087.500000, 2175.000000, X, Y) && !ellipse(28614.256409, 11008.986801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28560.571716, 10384.914864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29621.840027, 11191.914337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30116.323303, 10822.170975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29282.158234, 10511.902260, 870.000000, 870.000000, 0.000000, X, Y) [Fri Jun 14 04:48:06 2013] Writing fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src3.gif [Fri Jun 14 04:49:04 2013] Mean detx,y = (3988.00, -15838.00) [Fri Jun 14 04:49:05 2013] Setting backscal keywords in source and bgd. spectrum [Fri Jun 14 04:49:16 2013] Binned source spectrum to 10 counts/bin [Fri Jun 14 04:49:16 2013] Setting source spectrum file to fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Fri Jun 14 04:49:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src3_bgd.pi.gz [Fri Jun 14 04:50:11 2013] Not generating rmf since there are only 62 counts [Fri Jun 14 04:50:11 2013] rmf not generated due to insufficient counts [Fri Jun 14 04:51:10 2013] Updating aperture counts using extracted products [Fri Jun 14 04:51:10 2013] Total counts from fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 6.00 [Fri Jun 14 04:51:10 2013] Total counts from fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 17.00 [Fri Jun 14 04:51:10 2013] Got source and background scale factors 1335180.000000, 6237239.000000 [Fri Jun 14 04:51:10 2013] User source parameters: Position = (330.9, 134.6) = 15 25 41.06 51 23 18.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 2.4 +/- 3.6 Background aperture counts = 3.6 Rate = 0.004 +/- 0.005 [Fri Jun 14 04:51:10 2013] Updating counts from extracted products [Fri Jun 14 04:51:10 2013] Set source signif. to 2.36/1.91 = 1.24 [Fri Jun 14 04:51:11 2013] Calculating source flux in energy range 0.30-8.00 [Fri Jun 14 04:51:11 2013] Using photon index=1.80, rate=0.00356, arf fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src3.arf [Fri Jun 14 04:51:11 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jun 14 04:51:11 2013] Updating source flux to 9.5e-14 [Fri Jun 14 04:51:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri Jun 14 04:51:14 2013] xmm0112860301/analysis//spectral/fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete