[Thu Jun 13 22:47:48 2013] Detection parameters:
  Position = (328.8, 119.9) = 15 25 42.04 51 22 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.9 +/- 13.8
  Background counts = 27.2
  Rate = 0.008 +/- 0.001

[Thu Jun 13 22:47:48 2013] Off-axis axis estimate = 13.13'
[Fri Jun 14 00:31:55 2013] Using EEF radius (= 12.99 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 00:31:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 00:31:55 2013] Initial guess for spatial extent in simple fitting = 12.99"
[Fri Jun 14 00:31:55 2013] source mask rpix=3.0, npix_max = 48, mask sum = 47, frac = 0.966
[Fri Jun 14 00:31:55 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.99"
[Fri Jun 14 01:12:17 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 14 01:12:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src3.csv
[Fri Jun 14 01:12:17 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 14 01:12:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src3.csv
[Fri Jun 14 01:12:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:12:18 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 14 01:12:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 14 01:12:18 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 14 01:12:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 14 01:12:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112860301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:12:29 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.448607 pixels away
[Fri Jun 14 01:12:29 2013] Source 2 is offset by 0.068434 and 2.152838 pixels which is larger than
2 X fitted extent = 1.466069 x 1.466069, not incorporating fit results
[Fri Jun 14 01:12:29 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.638718 pixels away
[Fri Jun 14 01:12:29 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 01:12:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 01:12:29 2013] Assessing source extent using major
[Fri Jun 14 01:12:29 2013] Source does appear to be extended
[Fri Jun 14 01:12:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 01:12:29 2013] Source is confused with source 1
[Fri Jun 14 03:26:50 2013] Using EEF radius (= 12.99 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 03:26:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 03:26:50 2013] Initial guess for spatial extent in simple fitting = 12.99"
[Fri Jun 14 03:26:50 2013] source mask rpix=3.0, npix_max = 48, mask sum = 47, frac = 0.966
[Fri Jun 14 03:26:50 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 12.99"
[Fri Jun 14 03:59:38 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 14 03:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_src3.csv
[Fri Jun 14 03:59:38 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 14 03:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_src3.csv
[Fri Jun 14 03:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 03:59:38 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 14 03:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 14 03:59:38 2013] fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 14 03:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 14 03:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112860301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 03:59:48 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.115090 pixels away
[Fri Jun 14 03:59:48 2013] Warning, spatial fit 3 centroid is now closest to src. 1
[Fri Jun 14 03:59:48 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.638718 pixels away
[Fri Jun 14 03:59:48 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 03:59:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 03:59:48 2013] Assessing source extent using major
[Fri Jun 14 03:59:48 2013] Source does appear to be extended
[Fri Jun 14 03:59:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 04:48:06 2013] XMMSAS src. selection expression = ellipse(28560.571716, 10384.914864, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 04:48:06 2013] Writing source region out to fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 14 04:48:06 2013] Extracting stamp from image fullrun_mos2_xmm0112860301_pi300-10000_cl_sm2.00.img.gz, (291, 82) - (366, 157)
[Fri Jun 14 04:48:06 2013] XMMSAS bgd. selection expression = annulus(28560.571716, 10384.914864, 1087.500000, 2175.000000, X, Y) && !ellipse(28614.256409, 11008.986801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29621.840027, 11191.914337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28743.720947, 11664.432556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30116.323303, 10822.170975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29282.158234, 10511.902260, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 04:48:06 2013] Writing fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src2.gif
[Fri Jun 14 04:48:35 2013] Mean detx,y = (5178.00, -16805.00) 
[Fri Jun 14 04:48:36 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 04:48:47 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 04:48:47 2013] Setting source spectrum file to fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 14 04:48:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun 14 04:49:53 2013] Not generating rmf since there are only 75 counts
[Fri Jun 14 04:49:53 2013] rmf not generated due to insufficient counts
[Fri Jun 14 04:51:09 2013] Updating aperture counts using extracted products
[Fri Jun 14 04:51:10 2013] Total counts from fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 1.00
[Fri Jun 14 04:51:10 2013] Total counts from fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 5.00
[Fri Jun 14 04:51:10 2013] Got source and background scale factors 1070652.000000, 1966264.000000
[Fri Jun 14 04:51:10 2013] User source parameters:
  Position = (328.8, 119.9) = 15 25 42.04 51 22 13.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -1.7 +/- 2.3
  Background aperture counts = 2.7
  Rate = -0.003 +/- 0.004

[Fri Jun 14 04:51:10 2013] Updating counts from extracted products
[Fri Jun 14 04:51:10 2013] Set source signif. to -1.72/1.65 = -1.04
[Fri Jun 14 04:51:10 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 04:51:10 2013] Using photon index=1.80, rate=-0.0026, arf fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src2.arf
[Fri Jun 14 04:51:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 04:51:10 2013] Updated flux is not positive, keeping original flux
[Fri Jun 14 04:51:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 04:51:14 2013] xmm0112860301/analysis//spectral/fullrun_mos2_xmm0112860301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete