[Sat Jun  8 01:36:31 2013] Detection parameters:
  Position = (308.4, 320.0) = 7 41 10.56 31 11 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3086.7 +/- 69.4
  Background counts = 194.1
  Rate = 0.1 +/- 0.002

[Sat Jun  8 01:36:31 2013] Off-axis axis estimate = 1.72'
[Sat Jun  8 01:59:49 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 01:59:49 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun  8 01:59:49 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Sat Jun  8 01:59:49 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Jun  8 02:03:59 2013] fullrun_mos2_xmm0112850301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  8 02:03:59 2013] fullrun_mos2_xmm0112850301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  8 02:03:59 2013] Fit fullrun_mos2_xmm0112850301_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jun  8 02:03:59 2013] fullrun_mos2_xmm0112850301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  8 02:03:59 2013] fullrun_mos2_xmm0112850301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  8 02:03:59 2013] Fit fullrun_mos2_xmm0112850301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  8 02:04:04 2013] Spatial fit model total counts = 2537.480000, observed total counts = 2366.000000
[Sat Jun  8 02:04:04 2013] Offset between fit and detection position for source 1 = 0.113990 pixels
[Sat Jun  8 02:04:04 2013] 2555.250000 total counts/ 1494.750000 bgd. counts: snr = 27.430037
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.113990 pixels
  Position = (308.3, 319.9) = 7 41 10.59 31 11 58.8
  Extent = 5.1 (4.6-5.3)" x 4.6 (4.3-5.0)", rotation angle = 8 (324-11) degrees
  Source counts = 1060.5 +/- 50.5
  Background counts = 1494.8
  Rate = 0.07 +/- 0.003
[Sat Jun  8 02:04:04 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 02:04:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 02:04:04 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 02:04:04 2013] Source does appear to be extended
[Sat Jun  8 02:04:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.93
[Sat Jun  8 02:17:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 02:17:13 2013] Initial guess for spatial extent in simple fitting = 4.83"
[Sat Jun  8 02:17:13 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.156
[Sat Jun  8 02:17:13 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 4.83"
[Sat Jun  8 02:21:24 2013] fullrun_mos2_xmm0112850301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  8 02:21:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112850301_pi300-10000_cl_pass1_src1.csv
[Sat Jun  8 02:21:24 2013] fullrun_mos2_xmm0112850301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  8 02:21:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112850301_pi300-10000_cl_pass1_src1.csv
[Sat Jun  8 02:21:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112850301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112850301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 02:21:24 2013] fullrun_mos2_xmm0112850301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  8 02:21:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112850301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun  8 02:21:24 2013] fullrun_mos2_xmm0112850301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  8 02:21:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112850301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun  8 02:21:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112850301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112850301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 02:21:30 2013] Warning, spatial fit 1 centroid is now closest to src. 3
[Sat Jun  8 02:21:30 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 02:21:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 02:21:30 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 02:21:30 2013] Source does appear to be extended
[Sat Jun  8 02:21:30 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.93
[Sat Jun  8 02:48:41 2013] Counts = 1060.500000, rescaling region sizes by 2.000000
[Sat Jun  8 02:48:41 2013] XMMSAS src. selection expression = ellipse(26774.063200, 27785.149000, 608.062817, 551.544016, 8.025162, X, Y)
[Sat Jun  8 02:48:41 2013] Writing source region out to fullrun_mos2_xmm0112850301_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  8 02:48:41 2013] Extracting stamp from image fullrun_mos2_xmm0112850301_pi300-10000_cl_sm2.00.img.gz, (273, 285) - (343, 355)
[Sat Jun  8 02:48:41 2013] XMMSAS bgd. selection expression = annulus(26774.063200, 27785.149000, 2026.876058, 4053.752117, X, Y)
[Sat Jun  8 02:48:41 2013] Writing fullrun_mos2_xmm0112850301_pi300-10000_pass1_cl_src1.gif
[Sat Jun  8 02:48:48 2013] Mean detx,y = (36.65, 58.11) 
[Sat Jun  8 02:48:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  8 02:49:11 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  8 02:49:11 2013] Setting source spectrum file to fullrun_mos2_xmm0112850301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  8 02:49:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112850301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  8 02:58:33 2013] Updating aperture counts using extracted products
[Sat Jun  8 02:58:33 2013] Total counts from fullrun_mos2_xmm0112850301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1908.00
[Sat Jun  8 02:58:33 2013] Total counts from fullrun_mos2_xmm0112850301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 17907.00
[Sat Jun  8 02:58:33 2013] Got source and background scale factors 1006000.000000, 37670112.000000
[Sat Jun  8 02:58:33 2013] User source parameters:
  Position = (308.3, 319.9) = 7 41 10.59 31 11 58.8
  Extent = 5.1 (4.6-5.3)" x 4.6 (4.3-5.0)", rotation angle = 8 (324-11) degrees
  Source aperture counts = 1429.8 +/- 44.7
  Background aperture counts = 478.2
  Rate = 0.09 +/- 0.003

[Sat Jun  8 02:58:34 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 02:58:34 2013] Using photon index=1.80, rate=0.0688, arf fullrun_mos2_xmm0112850301_pi300-10000_pass1_cl_src1.arf
[Sat Jun  8 02:58:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 02:58:34 2013] Updating source flux to 7.4e-13
[Sat Jun  8 02:58:42 2013] xmm0112850301/analysis//spectral/fullrun_mos2_xmm0112850301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete