[Tue Jul 10 22:30:08 2012] Detection parameters:
  Position = (272.5, 195.9) = 11 30 15.56 -14 58 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.0 +/- 17.1
  Background counts = 53.1
  Rate = 0.004 +/- 0.0006

[Tue Jul 10 22:30:08 2012] Off-axis axis estimate = 7.67'
[Wed Jul 11 00:24:03 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 00:24:03 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Wed Jul 11 00:24:03 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.917
[Wed Jul 11 00:24:03 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.26"
[Wed Jul 11 00:41:55 2012] fullrun_mos2_xmm0112850201_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jul 11 00:41:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112850201_pi300-10000_cl_pass0_src9.csv
[Wed Jul 11 00:41:55 2012] fullrun_mos2_xmm0112850201_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jul 11 00:41:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112850201_pi300-10000_cl_pass0_src9.csv
[Wed Jul 11 00:41:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112850201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112850201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 00:41:55 2012] fullrun_mos2_xmm0112850201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jul 11 00:41:55 2012] fullrun_mos2_xmm0112850201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jul 11 00:41:55 2012] Fit fullrun_mos2_xmm0112850201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Jul 11 00:42:09 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.338938 pixels away
[Wed Jul 11 00:42:09 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 00:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 00:42:09 2012] Assessing source extent using major
[Wed Jul 11 00:42:09 2012] Source does appear to be extended
[Wed Jul 11 00:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 02:23:38 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 02:23:38 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Wed Jul 11 02:23:38 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.917
[Wed Jul 11 02:23:38 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.26"
[Wed Jul 11 02:39:08 2012] fullrun_mos2_xmm0112850201_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jul 11 02:39:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112850201_pi300-10000_cl_pass1_src9.csv
[Wed Jul 11 02:39:08 2012] fullrun_mos2_xmm0112850201_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jul 11 02:39:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112850201_pi300-10000_cl_pass1_src9.csv
[Wed Jul 11 02:39:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112850201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112850201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 02:39:08 2012] fullrun_mos2_xmm0112850201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jul 11 02:39:08 2012] fullrun_mos2_xmm0112850201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jul 11 02:39:08 2012] Fit fullrun_mos2_xmm0112850201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Jul 11 02:39:21 2012] Spatial fit model total counts = 170.803000, observed total counts = 171.000000
[Wed Jul 11 02:39:21 2012] Offset between fit and detection position for source 13 = 0.160017 pixels
[Wed Jul 11 02:39:21 2012] 169.073200 total counts/ 105.776000 bgd. counts: snr = 6.154474
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.160017 pixels
  Position = (272.6, 195.9) = 11 30 15.51 -14 58 34.2
  Extent = 4.9 (3.9-6.2)", rotation angle = 0
  Source counts = 63.3 +/- 13.0
  Background counts = 105.8
  Rate = 0.003 +/- 0.0006
[Wed Jul 11 02:39:21 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 02:39:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 02:39:21 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 02:39:21 2012] Source does appear to be extended
[Wed Jul 11 02:39:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 04:02:15 2012] XMMSAS src. selection expression = ellipse(23669.540800, 16992.606940, 296.485620, 296.485620, 0.000000, X, Y)
[Wed Jul 11 04:02:15 2012] Writing source region out to fullrun_mos2_xmm0112850201_pi300-10000_pass1_cl_src13_src.reg
[Wed Jul 11 04:02:15 2012] Extracting stamp from image fullrun_mos2_xmm0112850201_pi300-10000_cl_sm2.00.img.gz, (256, 179) - (290, 213)
[Wed Jul 11 04:02:16 2012] XMMSAS bgd. selection expression = annulus(23669.540800, 16992.606940, 494.142700, 988.285400, X, Y)
[Wed Jul 11 04:02:16 2012] Writing fullrun_mos2_xmm0112850201_pi300-10000_pass1_cl_src13.gif
[Wed Jul 11 04:03:59 2012] Mean detx,y = (7262.56, -8544.25) 
[Wed Jul 11 04:03:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 04:04:07 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 04:04:07 2012] Setting source spectrum file to fullrun_mos2_xmm0112850201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jul 11 04:04:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112850201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Jul 11 04:09:02 2012] Not generating rmf since there are only 63 counts
[Wed Jul 11 04:09:02 2012] rmf not generated due to insufficient counts
[Wed Jul 11 04:10:08 2012] Updating aperture counts using extracted products
[Wed Jul 11 04:10:08 2012] Error reading totcts from fullrun_mos2_xmm0112850201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jul 11 04:10:08 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 04:10:08 2012] Using photon index=1.80, rate=0.00302, arf fullrun_mos2_xmm0112850201_pi300-10000_pass1_cl_src13.arf
[Wed Jul 11 04:10:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 04:10:08 2012] Updating source flux to 8.7e-14
[Wed Jul 11 04:10:28 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting