[Tue Apr 10 16:40:10 2012] Detection parameters:
  Position = (302.8, 261.1) = 13 29 46.55 47 10 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.6 +/- 16.1
  Background counts = 35.7
  Rate = 0.006 +/- 0.001

[Tue Apr 10 16:40:11 2012] Off-axis axis estimate = 2.73'
[Tue Apr 10 16:40:52 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:40:52 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Tue Apr 10 16:40:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.952
[Tue Apr 10 16:40:52 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 7.79"
[Tue Apr 10 16:40:54 2012] fullrun_pn_xmm0112840201_pi300-10000_cl_pass0_src69.ximg exists
[Tue Apr 10 16:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112840201_pi300-10000_cl_pass0_src69.csv
[Tue Apr 10 16:40:54 2012] fullrun_pn_xmm0112840201_pi300-10000_cl_pass0_src69_1.ximg exists
[Tue Apr 10 16:40:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112840201_pi300-10000_cl_pass0_src69.csv
[Tue Apr 10 16:40:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112840201_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112840201_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:40:55 2012] fullrun_pn_xmm0112840201_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Tue Apr 10 16:40:55 2012] fullrun_pn_xmm0112840201_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Tue Apr 10 16:40:55 2012] Fit fullrun_pn_xmm0112840201_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Tue Apr 10 16:41:12 2012] Spatial fit model total counts = 912.581000, observed total counts = 910.000000
[Tue Apr 10 16:41:12 2012] Offset between fit and detection position for source 70 = 0.731632 pixels
[Tue Apr 10 16:41:12 2012] Warning, changing simple spatial fit ID from 69 to 37
[Tue Apr 10 16:41:12 2012] 877.951000 total counts/ 756.499000 bgd. counts: snr = 4.415709
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.731632 pixels
  Position = (302.1, 261.4) = 13 29 46.82 47 10 50.9
  Extent = 12.1 (9.0-15.3)", rotation angle = 0
  Source counts = 121.5 +/- 29.6
  Background counts = 756.5
  Rate = 0.006 +/- 0.002
[Tue Apr 10 16:41:12 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:41:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:41:12 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:41:12 2012] Source does appear to be extended
[Tue Apr 10 16:41:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:41:12 2012] Source is confused with source 71
[Tue Apr 10 16:41:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:41:42 2012] Initial guess for spatial extent in simple fitting = 12.12"
[Tue Apr 10 16:41:42 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.972
[Tue Apr 10 16:41:42 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 12.12"
[Tue Apr 10 16:41:43 2012] fullrun_pn_xmm0112840201_pi300-10000_cl_pass1_src62.ximg exists
[Tue Apr 10 16:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112840201_pi300-10000_cl_pass1_src62.csv
[Tue Apr 10 16:41:43 2012] fullrun_pn_xmm0112840201_pi300-10000_cl_pass1_src62_1.ximg exists
[Tue Apr 10 16:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112840201_pi300-10000_cl_pass1_src62.csv
[Tue Apr 10 16:41:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112840201_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112840201_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:41:44 2012] fullrun_pn_xmm0112840201_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Tue Apr 10 16:41:44 2012] fullrun_pn_xmm0112840201_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Tue Apr 10 16:41:44 2012] Fit fullrun_pn_xmm0112840201_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Tue Apr 10 16:41:58 2012] Warning, spatial fit 62 centroid is now closest to src. 71
[Tue Apr 10 16:41:58 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:41:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:41:58 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:41:58 2012] Source does appear to be extended
[Tue Apr 10 16:41:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:42:27 2012] XMMSAS src. selection expression = ellipse(26237.554000, 22696.038000, 727.314021, 727.314021, 0.000000, X, Y)
[Tue Apr 10 16:42:27 2012] Not overwriting source region fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70_src.reg
[Tue Apr 10 16:42:27 2012] Extracting stamp from image fullrun_pn_xmm0112840201_pi300-10000_cl_sm2.00.img.gz, (260, 220) - (344, 303)
[Tue Apr 10 16:42:27 2012] XMMSAS bgd. selection expression = annulus(26237.554000, 22696.038000, 1212.190035, 2424.380070, X, Y) && !ellipse(25051.446200, 23740.835800, 771.840822, 771.840822, 0.000000, X, Y) && !ellipse(27671.253200, 24864.895200, 473.692014, 473.692014, 0.000000, X, Y) && !ellipse(24044.226640, 22603.867200, 408.700012, 408.700012, 0.000000, X, Y) && !ellipse(26913.280029, 23857.819214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25304.814000, 22458.764000, 414.299212, 414.299212, 0.000000, X, Y) && !ellipse(24620.298800, 22515.876800, 497.374414, 497.374414, 0.000000, X, Y) && !ellipse(24736.002014, 24830.449371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23098.940000, 24974.858000, 1207.120035, 1207.120035, 0.000000, X, Y) && !ellipse(26317.952000, 26150.550000, 1037.944030, 1037.944030, 0.000000, X, Y) && !ellipse(26006.698000, 25724.096000, 1086.696031, 1086.696031, 0.000000, X, Y) && !ellipse(25623.360000, 25105.508000, 1210.104035, 1210.104035, 0.000000, X, Y) && !ellipse(26830.784460, 24466.796000, 1125.936032, 1125.936032, 0.000000, X, Y) && !ellipse(26695.530000, 25149.238000, 1114.056032, 1114.056032, 0.000000, X, Y) && !ellipse(23711.014679, 24394.586487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23670.780365, 23278.767944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25516.500000, 23029.434000, 734.706421, 734.706421, 0.000000, X, Y) && !ellipse(26001.173920, 22309.857483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.774800, 21951.115800, 852.896025, 852.896025, 0.000000, X, Y) && !ellipse(25785.055600, 21426.056000, 1364.112039, 1364.112039, 0.000000, X, Y) && !ellipse(24429.252000, 21278.620000, 1367.272039, 1367.272039, 99.319000, X, Y) && !ellipse(25752.146000, 21152.568000, 1236.792036, 1236.792036, 0.000000, X, Y) && !ellipse(24466.708000, 20740.954000, 1271.368037, 1271.368037, 0.000000, X, Y) && !ellipse(27970.900400, 19926.902200, 519.801631, 519.801631, 0.000000, X, Y)
[Tue Apr 10 16:42:27 2012] Writing fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70.gif
[Tue Apr 10 16:42:32 2012] ../../xmm0112840201/products/events/fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70_src.evt and ../../xmm0112840201/products/events/fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70_bgd.evt exist, delete to re-create
[Tue Apr 10 16:42:32 2012] Mean detx,y = (-644.10, -1760.50) 
[Tue Apr 10 16:42:32 2012] ../../xmm0112840201/products/images/fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70_src.img and ../../xmm0112840201/products/images/fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70_bgd.img exist, delete to re-create
[Tue Apr 10 16:42:32 2012] ../../xmm0112840201/products/spectra/fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70_src_b10.pi.gz and ../../xmm0112840201/products/spectra/fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70_bgd.pi exist, delete to re-create
[Tue Apr 10 16:42:32 2012] Setting source spectrum file to fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Tue Apr 10 16:42:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Tue Apr 10 16:42:32 2012] ../../xmm0112840201/products/lightcurves/fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70_src.lc and ../../xmm0112840201/products/lightcurves/fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70_bgd.lc exist, delete to re-create
[Tue Apr 10 16:42:36 2012] fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70.rmf exists, delete to re-create
[Tue Apr 10 16:42:36 2012] fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70.arf exists, delete to re-create
[Tue Apr 10 16:43:04 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:43:04 2012] Error reading totcts from fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Tue Apr 10 16:43:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:43:06 2012] Using photon index=1.80, rate=0.00638, arf fullrun_pn_xmm0112840201_pi300-10000_pass1_cl_src70.arf
[Tue Apr 10 16:43:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:43:06 2012] Updating source flux to 1.7e-14
[Tue Apr 10 16:43:13 2012] Flag c found in src. 70 procflags, skipping spectral fitting