[Tue Apr 10 16:40:13 2012] Detection parameters:
  Position = (288.2, 273.2) = 13 29 52.78 47 11 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2158.7 +/- 55.0
  Background counts = 17.2
  Rate = 0.1 +/- 0.003

[Tue Apr 10 16:40:20 2012] Off-axis axis estimate = 1.98'
[Tue Apr 10 16:40:56 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:40:56 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Tue Apr 10 16:40:56 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.823
[Tue Apr 10 16:40:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.42"
[Tue Apr 10 16:40:57 2012] fullrun_mos2_xmm0112840201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 16:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112840201_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 16:40:57 2012] fullrun_mos2_xmm0112840201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 16:40:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112840201_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 16:40:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112840201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112840201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:40:57 2012] fullrun_mos2_xmm0112840201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 16:40:57 2012] fullrun_mos2_xmm0112840201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 16:40:57 2012] Fit fullrun_mos2_xmm0112840201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 16:41:25 2012] Source 2 is offset by -6.322130 and 5.793820 pixels which is larger than
2 X fitted extent = 0.852497 x 0.852497, not incorporating fit results
[Tue Apr 10 16:41:25 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:41:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:41:25 2012] Assessing source extent using major
[Tue Apr 10 16:41:25 2012] Source does appear to be extended
[Tue Apr 10 16:41:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:41:45 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:41:45 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Tue Apr 10 16:41:45 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.823
[Tue Apr 10 16:41:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.42"
[Tue Apr 10 16:41:45 2012] fullrun_mos2_xmm0112840201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 16:41:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112840201_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 16:41:45 2012] fullrun_mos2_xmm0112840201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 16:41:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112840201_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 16:41:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112840201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112840201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:41:46 2012] fullrun_mos2_xmm0112840201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 16:41:46 2012] fullrun_mos2_xmm0112840201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 16:41:46 2012] Fit fullrun_mos2_xmm0112840201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 16:42:10 2012] Spatial fit model total counts = 2958.980000, observed total counts = 2962.000000
[Tue Apr 10 16:42:10 2012] Offset between fit and detection position for source 2 = 0.585920 pixels
[Tue Apr 10 16:42:10 2012] 2962.290000 total counts/ 1047.670000 bgd. counts: snr = 59.152123
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.585920 pixels
  Position = (288.5, 273.6) = 13 29 52.62 47 11 44.0
  Extent = 8.9 (8.4-9.4)", rotation angle = 0
  Source counts = 1914.6 +/- 54.4
  Background counts = 1047.7
  Rate = 0.09 +/- 0.003
[Tue Apr 10 16:42:10 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:42:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:42:10 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:42:10 2012] Source does appear to be extended
[Tue Apr 10 16:42:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:42:40 2012] Counts = 1914.620000, rescaling region sizes by 2.000000
[Tue Apr 10 16:42:40 2012] XMMSAS src. selection expression = ellipse(25054.988000, 23758.051200, 1063.530031, 1063.530031, 0.000000, X, Y)
[Tue Apr 10 16:42:40 2012] Not overwriting source region fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_src.reg
[Tue Apr 10 16:42:40 2012] Extracting stamp from image fullrun_mos2_xmm0112840201_pi300-10000_cl_sm2.00.img.gz, (227, 213) - (350, 335)
[Tue Apr 10 16:42:40 2012] XMMSAS bgd. selection expression = annulus(25054.988000, 23758.051200, 3545.100102, 7090.200204, X, Y) && !ellipse(21994.680283, 23000.595215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27653.616400, 24875.997400, 473.253614, 473.253614, 0.000000, X, Y) && !ellipse(23710.584000, 28823.174000, 336.144810, 336.144810, 0.000000, X, Y) && !ellipse(26916.033360, 23564.097000, 314.378409, 314.378409, 0.000000, X, Y) && !ellipse(23322.842000, 26156.253400, 376.456011, 336.084010, 271.080000, X, Y) && !ellipse(24971.877472, 22561.463989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22297.598240, 28527.033600, 391.644811, 391.644811, 0.000000, X, Y) && !ellipse(23698.346000, 23007.000000, 1226.312035, 1226.312035, 0.000000, X, Y) && !ellipse(24851.755981, 27202.035706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23451.352814, 28205.344727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24266.162720, 24056.378235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22288.011400, 20084.569600, 549.061616, 316.084009, 306.907100, X, Y) && !ellipse(24860.176000, 24728.000000, 1113.296032, 1113.296032, 0.000000, X, Y) && !ellipse(22632.098600, 21512.831620, 573.652017, 573.652017, 0.000000, X, Y) && !ellipse(24304.153534, 23425.293701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26712.180800, 26414.687600, 330.900810, 330.900810, 0.000000, X, Y) && !ellipse(24677.131500, 20897.028800, 482.463214, 175.437605, 127.010405, X, Y) && !ellipse(27870.219060, 25798.391800, 551.671216, 551.671216, 0.000000, X, Y) && !ellipse(17712.486680, 28969.554600, 326.996009, 326.996009, 0.000000, X, Y) && !ellipse(24457.548000, 25425.968000, 1162.096033, 1162.096033, 0.000000, X, Y) && !ellipse(25034.860800, 29754.362200, 295.277608, 295.277608, 0.000000, X, Y) && !ellipse(26962.840200, 28158.021400, 508.437615, 508.437615, 0.000000, X, Y) && !ellipse(23627.372000, 24543.884000, 1194.256034, 1194.256034, 0.000000, X, Y) && !ellipse(23712.606440, 30031.666200, 709.949620, 709.949620, 0.000000, X, Y) && !ellipse(22709.084000, 29474.984000, 1296.392037, 1296.392037, 0.000000, X, Y) && !ellipse(20285.044800, 27963.988400, 406.319212, 406.319212, 0.000000, X, Y)
[Tue Apr 10 16:42:40 2012] Writing fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2.gif
[Tue Apr 10 16:42:41 2012] ../../xmm0112840201/products/events/fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0112840201/products/events/fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Apr 10 16:42:41 2012] Mean detx,y = (-45.82, 289.52) 
[Tue Apr 10 16:42:41 2012] ../../xmm0112840201/products/images/fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_src.img and ../../xmm0112840201/products/images/fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Apr 10 16:42:41 2012] ../../xmm0112840201/products/spectra/fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0112840201/products/spectra/fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Apr 10 16:42:41 2012] Setting source spectrum file to fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Apr 10 16:42:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Apr 10 16:42:41 2012] ../../xmm0112840201/products/lightcurves/fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0112840201/products/lightcurves/fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Apr 10 16:42:43 2012] fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Tue Apr 10 16:42:43 2012] fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Tue Apr 10 16:43:07 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:43:07 2012] Error reading totcts from fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Apr 10 16:43:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:43:07 2012] Using photon index=1.80, rate=0.0927, arf fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2.arf
[Tue Apr 10 16:43:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:43:07 2012] Updating source flux to 8.3e-13
[Tue Apr 10 16:43:12 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Tue Apr 10 16:43:13 2012] Reading fit data from xmm0112840201/analysis//spectral/fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_pl.csv
[Tue Apr 10 16:43:13 2012] Spectral fit parameter nH value = 5.06597e+21
[Tue Apr 10 16:43:13 2012] Spectral fit parameter PhoIndex value = 6.32144
[Tue Apr 10 16:43:13 2012] Failed to get F(0.3-8.0) from xmm0112840201/analysis//spectral/fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 16:43:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:43:13 2012] Using Nh = 5.1e+21, photon index=6.32, rate=0.0927, arf fullrun_mos2_xmm0112840201_pi300-10000_pass1_cl_src2.arf
[Tue Apr 10 16:43:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:43:13 2012] Updating source flux to 5e-13