[Tue Apr 10 16:40:12 2012] Detection parameters:
  Position = (281.0, 284.7) = 13 29 55.84 47 12 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.1 +/- 10.9
  Background counts = 19.3
  Rate = 0.002 +/- 0.0005

[Tue Apr 10 16:40:13 2012] Off-axis axis estimate = 1.61'
[Tue Apr 10 16:40:55 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:40:55 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Tue Apr 10 16:40:55 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Tue Apr 10 16:40:55 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 7.23"
[Tue Apr 10 16:40:56 2012] fullrun_mos1_xmm0112840201_pi300-10000_cl_pass0_src41.ximg exists
[Tue Apr 10 16:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112840201_pi300-10000_cl_pass0_src41.csv
[Tue Apr 10 16:40:56 2012] fullrun_mos1_xmm0112840201_pi300-10000_cl_pass0_src41_1.ximg exists
[Tue Apr 10 16:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112840201_pi300-10000_cl_pass0_src41.csv
[Tue Apr 10 16:40:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112840201_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112840201_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:40:56 2012] fullrun_mos1_xmm0112840201_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Tue Apr 10 16:40:56 2012] fullrun_mos1_xmm0112840201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Tue Apr 10 16:40:56 2012] Fit fullrun_mos1_xmm0112840201_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Tue Apr 10 16:41:19 2012] Source 51 is offset by -6.651534 and 6.322585 pixels which is larger than
2 X fitted extent = 2.699540 x 2.699540, not incorporating fit results
[Tue Apr 10 16:41:19 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:41:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:41:19 2012] Assessing source extent using major
[Tue Apr 10 16:41:19 2012] Source does appear to be extended
[Tue Apr 10 16:41:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:41:44 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:41:44 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Tue Apr 10 16:41:44 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Tue Apr 10 16:41:44 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 7.23"
[Tue Apr 10 16:41:45 2012] fullrun_mos1_xmm0112840201_pi300-10000_cl_pass1_src37.ximg exists
[Tue Apr 10 16:41:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112840201_pi300-10000_cl_pass1_src37.csv
[Tue Apr 10 16:41:45 2012] fullrun_mos1_xmm0112840201_pi300-10000_cl_pass1_src37_1.ximg exists
[Tue Apr 10 16:41:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112840201_pi300-10000_cl_pass1_src37.csv
[Tue Apr 10 16:41:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112840201_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112840201_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:41:45 2012] fullrun_mos1_xmm0112840201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Tue Apr 10 16:41:45 2012] fullrun_mos1_xmm0112840201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Tue Apr 10 16:41:45 2012] Fit fullrun_mos1_xmm0112840201_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Tue Apr 10 16:42:04 2012] Source 51 is offset by 0.953983 and 2.717068 pixels which is larger than
2 X fitted extent = 0.994212 x 0.994212, not incorporating fit results
[Tue Apr 10 16:42:04 2012] Source 51 is offset by -6.651534 and 6.322585 pixels which is larger than
2 X fitted extent = 2.652336 x 2.652336, not incorporating fit results
[Tue Apr 10 16:42:04 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:42:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:42:04 2012] Assessing source extent using major
[Tue Apr 10 16:42:04 2012] Source does appear to be extended
[Tue Apr 10 16:42:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:42:37 2012] XMMSAS src. selection expression = ellipse(24398.526550, 24717.854889, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 16:42:37 2012] Not overwriting source region fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51_src.reg
[Tue Apr 10 16:42:37 2012] Extracting stamp from image fullrun_mos1_xmm0112840201_pi300-10000_cl_sm2.00.img.gz, (244, 247) - (319, 322)
[Tue Apr 10 16:42:37 2012] XMMSAS bgd. selection expression = annulus(24398.526550, 24717.854889, 1087.500000, 2175.000000, X, Y) && !ellipse(25040.162482, 23755.263757, 771.637561, 612.302220, 333.052133, X, Y) && !ellipse(22000.443400, 23006.414400, 382.840011, 382.840011, 0.000000, X, Y) && !ellipse(24898.908000, 22533.502000, 404.164812, 404.164812, 0.000000, X, Y) && !ellipse(23332.700800, 26148.718400, 393.044811, 393.044811, 0.000000, X, Y) && !ellipse(26952.429000, 23575.356000, 396.256811, 396.256811, 0.000000, X, Y) && !ellipse(24037.154920, 22614.168400, 477.724014, 477.724014, 0.000000, X, Y) && !ellipse(24820.375420, 27183.856000, 419.300812, 419.300812, 0.000000, X, Y) && !ellipse(25299.667389, 22222.244171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23282.501780, 25524.930000, 741.887221, 741.887221, 0.000000, X, Y) && !ellipse(23294.945038, 24971.285400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22568.496220, 26794.921000, 286.341608, 286.341608, 0.000000, X, Y) && !ellipse(26705.213348, 26377.792480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24724.712830, 25345.894104, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 16:42:37 2012] Writing fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51.gif
[Tue Apr 10 16:42:37 2012] ../../xmm0112840201/products/events/fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51_src.evt and ../../xmm0112840201/products/events/fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51_bgd.evt exist, delete to re-create
[Tue Apr 10 16:42:37 2012] Mean detx,y = (-441.52, 325.19) 
[Tue Apr 10 16:42:37 2012] ../../xmm0112840201/products/images/fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51_src.img and ../../xmm0112840201/products/images/fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51_bgd.img exist, delete to re-create
[Tue Apr 10 16:42:37 2012] ../../xmm0112840201/products/spectra/fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51_src_b10.pi.gz and ../../xmm0112840201/products/spectra/fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51_bgd.pi exist, delete to re-create
[Tue Apr 10 16:42:37 2012] Setting source spectrum file to fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Tue Apr 10 16:42:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Tue Apr 10 16:42:37 2012] ../../xmm0112840201/products/lightcurves/fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51_src.lc and ../../xmm0112840201/products/lightcurves/fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51_bgd.lc exist, delete to re-create
[Tue Apr 10 16:42:40 2012] Not generating rmf since there are only 44 counts
[Tue Apr 10 16:42:40 2012] rmf not generated due to insufficient counts
[Tue Apr 10 16:42:40 2012] fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51.arf exists, delete to re-create
[Tue Apr 10 16:43:06 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:43:06 2012] Error reading totcts from fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Tue Apr 10 16:43:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:43:07 2012] Using photon index=1.80, rate=0.00217, arf fullrun_mos1_xmm0112840201_pi300-10000_pass1_cl_src51.arf
[Tue Apr 10 16:43:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:43:07 2012] Updating source flux to 2.1e-14
[Tue Apr 10 16:43:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting