[Tue Apr 10 19:33:18 2012] Detection parameters:
  Position = (312.6, 320.5) = 12 37 40.01 11 48 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.7 +/- 13.4
  Background counts = 24.3
  Rate = 0.003 +/- 0.0007

[Tue Apr 10 19:33:18 2012] Off-axis axis estimate = 1.90'
[Tue Apr 10 19:33:35 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 19:33:35 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Tue Apr 10 19:33:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.570
[Tue Apr 10 19:33:35 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.38"
[Tue Apr 10 19:33:36 2012] fullrun_mos2_xmm0112840101_pi300-10000_cl_pass0_src15.ximg exists
[Tue Apr 10 19:33:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112840101_pi300-10000_cl_pass0_src15.csv
[Tue Apr 10 19:33:36 2012] fullrun_mos2_xmm0112840101_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Apr 10 19:33:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112840101_pi300-10000_cl_pass0_src15.csv
[Tue Apr 10 19:33:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112840101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112840101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 19:33:36 2012] fullrun_mos2_xmm0112840101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Apr 10 19:33:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112840101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Apr 10 19:33:36 2012] fullrun_mos2_xmm0112840101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Apr 10 19:33:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112840101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Apr 10 19:33:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112840101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112840101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 19:33:47 2012] Source 13 is offset by -6.165486 and 6.238835 pixels which is larger than
2 X fitted extent = 0.848041 x 0.848041, not incorporating fit results
[Tue Apr 10 19:33:47 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 19:33:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 19:33:47 2012] Assessing source extent using major
[Tue Apr 10 19:33:47 2012] Source does appear to be extended
[Tue Apr 10 19:33:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 19:33:56 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 19:33:56 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Tue Apr 10 19:33:56 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.570
[Tue Apr 10 19:33:56 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.38"
[Tue Apr 10 19:33:56 2012] fullrun_mos2_xmm0112840101_pi300-10000_cl_pass1_src13.ximg exists
[Tue Apr 10 19:33:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112840101_pi300-10000_cl_pass1_src13.csv
[Tue Apr 10 19:33:57 2012] fullrun_mos2_xmm0112840101_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Apr 10 19:33:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112840101_pi300-10000_cl_pass1_src13.csv
[Tue Apr 10 19:33:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112840101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112840101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 19:33:57 2012] fullrun_mos2_xmm0112840101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Apr 10 19:33:57 2012] fullrun_mos2_xmm0112840101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Apr 10 19:33:57 2012] Fit fullrun_mos2_xmm0112840101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Apr 10 19:34:06 2012] Source 13 is offset by 7.403157 and -1.094105 pixels which is larger than
2 X fitted extent = 2.622998 x 2.622998, not incorporating fit results
[Tue Apr 10 19:34:06 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 19:34:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 19:34:06 2012] Assessing source extent using major
[Tue Apr 10 19:34:06 2012] Source does appear to be extended
[Tue Apr 10 19:34:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 19:34:22 2012] XMMSAS src. selection expression = ellipse(27149.338684, 27831.046661, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 19:34:22 2012] Not overwriting source region fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13_src.reg
[Tue Apr 10 19:34:22 2012] Extracting stamp from image fullrun_mos2_xmm0112840101_pi300-10000_cl_sm2.00.img.gz, (275, 283) - (350, 358)
[Tue Apr 10 19:34:22 2012] XMMSAS bgd. selection expression = annulus(27149.338684, 27831.046661, 1087.500000, 2175.000000, X, Y) && !ellipse(26080.444476, 27975.572509, 1436.538760, 1323.226509, 349.434422, X, Y) && !ellipse(27019.429260, 26047.181400, 358.224810, 358.224810, 0.000000, X, Y) && !ellipse(26655.341278, 29033.339508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26825.727783, 28588.709717, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 19:34:22 2012] Writing fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13.gif
[Tue Apr 10 19:34:22 2012] ../../xmm0112840101/products/events/fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0112840101/products/events/fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Tue Apr 10 19:34:22 2012] Mean detx,y = (-567.91, -379.07) 
[Tue Apr 10 19:34:22 2012] ../../xmm0112840101/products/images/fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13_src.img and ../../xmm0112840101/products/images/fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Tue Apr 10 19:34:22 2012] ../../xmm0112840101/products/spectra/fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0112840101/products/spectra/fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Tue Apr 10 19:34:22 2012] Setting source spectrum file to fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Apr 10 19:34:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Apr 10 19:34:22 2012] ../../xmm0112840101/products/lightcurves/fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0112840101/products/lightcurves/fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Tue Apr 10 19:34:23 2012] Not generating rmf since there are only 64 counts
[Tue Apr 10 19:34:23 2012] rmf not generated due to insufficient counts
[Tue Apr 10 19:34:23 2012] fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13.arf exists, delete to re-create
[Tue Apr 10 19:34:44 2012] Updating aperture counts using extracted products
[Tue Apr 10 19:34:44 2012] Error reading totcts from fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Apr 10 19:34:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 19:34:44 2012] Using photon index=1.80, rate=0.00332, arf fullrun_mos2_xmm0112840101_pi300-10000_pass1_cl_src13.arf
[Tue Apr 10 19:34:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 19:34:44 2012] Updating source flux to 3.7e-14
[Tue Apr 10 19:34:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting