[Tue Apr 10 19:33:17 2012] Detection parameters:
  Position = (300.5, 322.1) = 12 37 43.59 11 49 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16980.9 +/- 155.2
  Background counts = 24.4
  Rate = 0.7 +/- 0.007

[Tue Apr 10 19:33:17 2012] Off-axis axis estimate = 1.72'
[Tue Apr 10 19:33:35 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 19:33:35 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Apr 10 19:33:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Tue Apr 10 19:33:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Apr 10 19:33:35 2012] fullrun_mos1_xmm0112840101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 19:33:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112840101_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 19:33:35 2012] fullrun_mos1_xmm0112840101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 19:33:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112840101_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 19:33:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112840101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112840101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 19:33:35 2012] fullrun_mos1_xmm0112840101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 19:33:35 2012] fullrun_mos1_xmm0112840101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 19:33:35 2012] Fit fullrun_mos1_xmm0112840101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 19:33:45 2012] Spatial fit model total counts = 13823.000000, observed total counts = 13823.000000
[Tue Apr 10 19:33:45 2012] Offset between fit and detection position for source 2 = 0.190915 pixels
[Tue Apr 10 19:33:45 2012] 13852.540000 total counts/ 3247.640000 bgd. counts: snr = 186.089829
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.190915 pixels
  Position = (300.4, 322.2) = 12 37 43.64 11 49 4.0
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 10604.9 +/- 117.7
  Background counts = 3247.6
  Rate = 0.5 +/- 0.006
[Tue Apr 10 19:33:45 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 19:33:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 19:33:45 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 19:33:45 2012] Source does appear to be extended
[Tue Apr 10 19:33:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 19:33:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 19:33:56 2012] Initial guess for spatial extent in simple fitting = 5.76"
[Tue Apr 10 19:33:56 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.902
[Tue Apr 10 19:33:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.76"
[Tue Apr 10 19:33:56 2012] fullrun_mos1_xmm0112840101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 19:33:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112840101_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 19:33:56 2012] fullrun_mos1_xmm0112840101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 19:33:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112840101_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 19:33:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112840101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112840101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 19:33:56 2012] fullrun_mos1_xmm0112840101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 19:33:56 2012] fullrun_mos1_xmm0112840101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 19:33:56 2012] Fit fullrun_mos1_xmm0112840101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 19:34:04 2012] Spatial fit model total counts = 13823.000000, observed total counts = 13823.000000
[Tue Apr 10 19:34:04 2012] Offset between fit and detection position for source 2 = 0.000000 pixels
[Tue Apr 10 19:34:04 2012] 13852.540000 total counts/ 3247.640000 bgd. counts: snr = 186.089829
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000000 pixels
  Position = (300.4, 322.2) = 12 37 43.64 11 49 4.0
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 10604.9 +/- 117.7
  Background counts = 3247.6
  Rate = 0.5 +/- 0.006
[Tue Apr 10 19:34:04 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 19:34:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 19:34:04 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 19:34:04 2012] Source does appear to be extended
[Tue Apr 10 19:34:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 19:34:20 2012] Counts = 10604.900000, rescaling region sizes by 3.000000
[Tue Apr 10 19:34:20 2012] XMMSAS src. selection expression = ellipse(26083.272800, 27980.320600, 1036.083855, 1036.083855, 0.000000, X, Y)
[Tue Apr 10 19:34:20 2012] Not overwriting source region fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_src.reg
[Tue Apr 10 19:34:20 2012] Extracting stamp from image fullrun_mos1_xmm0112840101_pi300-10000_cl_sm2.00.img.gz, (241, 263) - (360, 382)
[Tue Apr 10 19:34:20 2012] XMMSAS bgd. selection expression = annulus(26083.272800, 27980.320600, 5180.419274, 10360.838548, X, Y) && !ellipse(31469.690200, 19436.895600, 398.560811, 398.560811, 0.000000, X, Y) && !ellipse(22539.288200, 25607.580800, 346.236810, 346.236810, 0.000000, X, Y) && !ellipse(27030.725200, 26026.628200, 285.512008, 285.512008, 0.000000, X, Y) && !ellipse(31223.964000, 34148.997200, 390.680811, 390.680811, 0.000000, X, Y) && !ellipse(20461.155400, 19766.461000, 570.053616, 570.053616, 0.000000, X, Y) && !ellipse(23065.898315, 29507.240997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25501.037800, 23167.434800, 518.944815, 518.944815, 0.000000, X, Y) && !ellipse(22952.045200, 24278.654000, 770.820022, 338.254410, 13.683683, X, Y) && !ellipse(22254.423126, 37699.421509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31632.852142, 33881.377869, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 19:34:20 2012] Writing fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2.gif
[Tue Apr 10 19:34:21 2012] ../../xmm0112840101/products/events/fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0112840101/products/events/fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Apr 10 19:34:21 2012] Mean detx,y = (354.58, -271.59) 
[Tue Apr 10 19:34:21 2012] ../../xmm0112840101/products/images/fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_src.img and ../../xmm0112840101/products/images/fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Apr 10 19:34:21 2012] ../../xmm0112840101/products/spectra/fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0112840101/products/spectra/fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Apr 10 19:34:21 2012] Setting source spectrum file to fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Apr 10 19:34:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Apr 10 19:34:21 2012] ../../xmm0112840101/products/lightcurves/fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0112840101/products/lightcurves/fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Apr 10 19:34:22 2012] fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Tue Apr 10 19:34:22 2012] fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Tue Apr 10 19:34:43 2012] Updating aperture counts using extracted products
[Tue Apr 10 19:34:43 2012] Error reading totcts from fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Apr 10 19:34:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 19:34:44 2012] Using photon index=1.80, rate=0.505, arf fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2.arf
[Tue Apr 10 19:34:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 19:34:44 2012] Updating source flux to 4.5e-12
[Tue Apr 10 19:34:47 2012] Reading fit data from xmm0112840101/analysis//spectral/fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_pl.csv
[Tue Apr 10 19:34:47 2012] Spectral fit parameter nH value = 2.90181e+20
[Tue Apr 10 19:34:47 2012] Spectral fit parameter PhoIndex value = 1.9431
[Tue Apr 10 19:34:47 2012] Failed to get F(0.3-8.0) from xmm0112840101/analysis//spectral/fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 19:34:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 19:34:47 2012] Using Nh = 2.9e+20, photon index=1.94, rate=0.505, arf fullrun_mos1_xmm0112840101_pi300-10000_pass1_cl_src2.arf
[Tue Apr 10 19:34:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 19:34:47 2012] Updating source flux to 4.3e-12