[Wed Aug 22 10:23:44 2012] Detection parameters:
  Position = (334.9, 191.9) = 12 10 16.86 39 18 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.8 +/- 17.5
  Background counts = 15.9
  Rate = 0.02 +/- 0.002

[Wed Aug 22 10:23:45 2012] Off-axis axis estimate = 8.16'
[Wed Aug 22 10:28:31 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 10:28:31 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Wed Aug 22 10:28:31 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.058
[Wed Aug 22 10:28:31 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 10.51"
[Wed Aug 22 15:57:59 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src87.ximg exists
[Wed Aug 22 15:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src87.csv
[Wed Aug 22 15:57:59 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src87_1.ximg exists
[Wed Aug 22 15:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src87.csv
[Wed Aug 22 15:57:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 15:58:01 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Wed Aug 22 15:58:01 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Wed Aug 22 15:58:01 2012] Fit fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Wed Aug 22 19:33:58 2012] Source 88 is offset by -2.382106 and -0.835846 pixels which is larger than
2 X fitted extent = 1.167117 x 1.167117, not incorporating fit results
[Wed Aug 22 19:33:58 2012] Warning, spatial fit 87 centroid is now closest to src. 90
[Wed Aug 22 19:33:58 2012] Warning: source 88 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 88 at 11.166285 pixels away
[Wed Aug 22 19:33:58 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 19:33:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 19:33:58 2012] Assessing source extent using major
[Wed Aug 22 19:33:58 2012] Source does appear to be extended
[Wed Aug 22 19:33:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 19:34:27 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 19:34:27 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Wed Aug 22 19:34:27 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.058
[Wed Aug 22 19:34:27 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 10.51"
[Wed Aug 22 23:03:32 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src62.ximg exists
[Wed Aug 22 23:03:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src62.csv
[Wed Aug 22 23:03:32 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src62_1.ximg exists
[Wed Aug 22 23:03:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src62.csv
[Wed Aug 22 23:03:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 23:03:33 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Wed Aug 22 23:03:33 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Wed Aug 22 23:03:33 2012] Fit fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Thu Aug 23 01:51:42 2012] Spatial fit model total counts = 404.460000, observed total counts = 405.000000
[Thu Aug 23 01:51:42 2012] Offset between fit and detection position for source 88 = 0.077997 pixels
[Thu Aug 23 01:51:42 2012] 386.658000 total counts/ 261.273000 bgd. counts: snr = 7.757081
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 0.077997 pixels
  Position = (334.9, 191.8) = 12 10 16.84 39 18 17.2
  Extent = 5.2 (4.4-6.1)", rotation angle = 0
  Source counts = 125.4 +/- 19.7
  Background counts = 261.3
  Rate = 0.006 +/- 0.001
[Thu Aug 23 01:51:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 01:51:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 01:51:42 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 01:51:42 2012] Source does appear to be extended
[Thu Aug 23 01:51:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 01:52:03 2012] XMMSAS src. selection expression = ellipse(29090.310300, 16640.942800, 311.583609, 311.583609, 0.000000, X, Y)
[Thu Aug 23 01:52:03 2012] Writing source region out to fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src88_src.reg
[Thu Aug 23 01:52:03 2012] Extracting stamp from image fullrun_pn_xmm0112830501_pi300-10000_cl_sm2.00.img.gz, (317, 174) - (353, 210)
[Thu Aug 23 01:52:03 2012] XMMSAS bgd. selection expression = annulus(29090.310300, 16640.942800, 519.306015, 1038.612030, X, Y) && !ellipse(30646.357422, 16371.706573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27846.424000, 15842.702000, 1695.824049, 1695.824049, 0.000000, X, Y)
[Thu Aug 23 01:52:03 2012] Writing fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src88.gif
[Thu Aug 23 02:54:49 2012] Mean detx,y = (-398.66, -8308.25) 
[Thu Aug 23 02:54:52 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 02:55:04 2012] grppha failed
[Thu Aug 23 02:55:04 2012] Setting source spectrum file to fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src88_src.pi.gz
[Thu Aug 23 02:55:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Thu Aug 23 03:21:45 2012] Updating aperture counts using extracted products
[Thu Aug 23 03:21:45 2012] Error reading totcts from fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src88_src.pi.gz
[Thu Aug 23 03:21:46 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 03:21:50 2012] Flag b found in src. 88 procflags, skipping spectral fitting
[Thu Aug 23 03:21:50 2012] Source 88 has no response, skipping
[Thu Aug 23 03:21:51 2012] xmm0112830501/analysis//spectral/fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src88_pl.csv not found, spectral fit skipped or did not complete