[Wed Aug 22 10:23:42 2012] Detection parameters:
  Position = (299.5, 357.8) = 12 10 30.11 39 30 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.6 +/- 15.1
  Background counts = 23.9
  Rate = 0.006 +/- 0.001

[Wed Aug 22 10:23:45 2012] Off-axis axis estimate = 4.31'
[Wed Aug 22 10:28:31 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 10:28:31 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Wed Aug 22 10:28:31 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Wed Aug 22 10:28:31 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 8.58"
[Wed Aug 22 15:57:59 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src38.ximg exists
[Wed Aug 22 15:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src38.csv
[Wed Aug 22 15:57:59 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed Aug 22 15:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src38.csv
[Wed Aug 22 15:57:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 15:58:00 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed Aug 22 15:58:00 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Aug 22 15:58:00 2012] Fit fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Wed Aug 22 19:33:57 2012] Spatial fit model total counts = 788.513000, observed total counts = 634.000000
[Wed Aug 22 19:33:57 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 22 19:33:57 2012] Source 39 is offset by -4.862287 and 7.673508 pixels which is larger than
2 X fitted extent = 5.291816 x 5.291816, not incorporating fit results
[Wed Aug 22 19:33:58 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 19:33:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 19:33:58 2012] Assessing source extent using major
[Wed Aug 22 19:33:58 2012] Source does appear to be extended
[Wed Aug 22 19:33:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 19:33:58 2012] Source is confused with source 36
[Wed Aug 22 19:34:27 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 19:34:27 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Wed Aug 22 19:34:27 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Wed Aug 22 19:34:27 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 8.58"
[Wed Aug 22 23:03:31 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src29.ximg exists
[Wed Aug 22 23:03:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src29.csv
[Wed Aug 22 23:03:31 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed Aug 22 23:03:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src29.csv
[Wed Aug 22 23:03:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 23:03:33 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed Aug 22 23:03:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Aug 22 23:03:33 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Aug 22 23:03:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Aug 22 23:03:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 01:51:42 2012] Spatial fit model total counts = 785.423000, observed total counts = 634.000000
[Thu Aug 23 01:51:42 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 23 01:51:42 2012] Source 39 is offset by 4.344655 and 7.505875 pixels which is larger than
2 X fitted extent = 1.218667 x 1.218667, not incorporating fit results
[Thu Aug 23 01:51:42 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 32.601867 pixels away
[Thu Aug 23 01:51:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 01:51:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 01:51:42 2012] Assessing source extent using major
[Thu Aug 23 01:51:42 2012] Source does appear to be extended
[Thu Aug 23 01:51:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 01:52:02 2012] XMMSAS src. selection expression = ellipse(26009.747009, 31081.113159, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 23 01:52:02 2012] Writing source region out to fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src39_src.reg
[Thu Aug 23 01:52:02 2012] Extracting stamp from image fullrun_pn_xmm0112830501_pi300-10000_cl_sm2.00.img.gz, (262, 320) - (337, 395)
[Thu Aug 23 01:52:02 2012] XMMSAS bgd. selection expression = annulus(26009.747009, 31081.113159, 1087.500000, 2175.000000, X, Y) && !ellipse(26771.849600, 29665.380000, 1368.969639, 1368.969639, 0.000000, X, Y) && !ellipse(25120.423706, 33715.135864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25373.299316, 33024.371582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25577.802948, 32480.422455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.402710, 32385.104248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25888.794495, 31695.558624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24279.963562, 31542.822754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27283.706549, 30434.845602, 1029.282491, 229.367294, 121.374598, X, Y) && !ellipse(22596.908000, 30483.980000, 1366.744039, 1366.744039, 0.000000, X, Y) && !ellipse(22755.708000, 29979.422000, 1337.360038, 1337.360038, 0.000000, X, Y) && !ellipse(27807.732849, 29816.148346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23332.293800, 28845.870600, 1287.000037, 422.717612, 66.944000, X, Y) && !ellipse(23436.900000, 28545.312000, 1231.656035, 1231.656035, 0.000000, X, Y) && !ellipse(23742.290000, 27694.066000, 1560.040045, 1560.040045, 0.000000, X, Y)
[Thu Aug 23 01:52:02 2012] Writing fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src39.gif
[Thu Aug 23 02:33:49 2012] Mean detx,y = (-3193.24, 6101.23) 
[Thu Aug 23 02:33:52 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 02:34:09 2012] grppha failed
[Thu Aug 23 02:34:09 2012] Setting source spectrum file to fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src39_src.pi.gz
[Thu Aug 23 02:34:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Aug 23 02:59:58 2012] Not generating rmf since there are only 73 counts
[Thu Aug 23 02:59:58 2012] rmf not generated due to insufficient counts
[Thu Aug 23 03:21:45 2012] Updating aperture counts using extracted products
[Thu Aug 23 03:21:45 2012] Error reading totcts from fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src39_src.pi.gz
[Thu Aug 23 03:21:46 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 03:21:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 23 03:21:51 2012] xmm0112830501/analysis//spectral/fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete