[Wed Aug 22 10:23:40 2012] Detection parameters:
  Position = (292.4, 275.2) = 12 10 32.77 39 24 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119052.6 +/- 405.6
  Background counts = 29.2
  Rate = 7 +/- 0.02

[Wed Aug 22 10:23:45 2012] Off-axis axis estimate = 1.74'
[Wed Aug 22 10:28:31 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 10:28:31 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Aug 22 10:28:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Wed Aug 22 10:28:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Wed Aug 22 15:57:58 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 22 15:57:58 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src1.csv
[Wed Aug 22 15:57:58 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 22 15:57:58 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src1.csv
[Wed Aug 22 15:57:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 15:58:00 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 22 15:58:00 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 22 15:58:00 2012] Fit fullrun_pn_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug 22 19:33:57 2012] Spatial fit model total counts = 108408.000000, observed total counts = 108114.000000
[Wed Aug 22 19:33:57 2012] Offset between fit and detection position for source 1 = 0.200363 pixels
[Wed Aug 22 19:33:57 2012] 108745.700000 total counts/ 21505.200000 bgd. counts: snr = 594.903334
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.200363 pixels
  Position = (292.4, 275.4) = 12 10 32.79 39 24 20.8
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 87240.5 +/- 329.8
  Background counts = 21505.2
  Rate = 4 +/- 0.02
[Wed Aug 22 19:33:58 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 19:33:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 19:33:58 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 19:33:58 2012] Source does appear to be extended
[Wed Aug 22 19:33:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 19:33:58 2012] Source is confused with source 95
[Wed Aug 22 19:34:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 19:34:27 2012] Initial guess for spatial extent in simple fitting = 6.20"
[Wed Aug 22 19:34:27 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.080
[Wed Aug 22 19:34:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.20"
[Wed Aug 22 23:03:31 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 22 23:03:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 23:03:31 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 22 23:03:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 23:03:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 23:03:32 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 22 23:03:32 2012] fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 22 23:03:32 2012] Fit fullrun_pn_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 23 01:51:42 2012] Spatial fit model total counts = 108356.000000, observed total counts = 108114.000000
[Thu Aug 23 01:51:42 2012] Offset between fit and detection position for source 1 = 0.000269 pixels
[Thu Aug 23 01:51:42 2012] 108688.400000 total counts/ 21483.900000 bgd. counts: snr = 594.952557
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000269 pixels
  Position = (292.4, 275.4) = 12 10 32.79 39 24 20.8
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 87204.5 +/- 329.7
  Background counts = 21483.9
  Rate = 4 +/- 0.02
[Thu Aug 23 01:51:42 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 01:51:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 01:51:42 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 01:51:42 2012] Source does appear to be extended
[Thu Aug 23 01:51:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 01:52:01 2012] Counts = 87204.500000, rescaling region sizes by 3.000000
[Thu Aug 23 01:52:01 2012] XMMSAS src. selection expression = ellipse(25389.671400, 23912.000800, 1116.007232, 1116.007232, 0.000000, X, Y)
[Thu Aug 23 01:52:01 2012] Writing source region out to fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug 23 01:52:01 2012] Extracting stamp from image fullrun_pn_xmm0112830501_pi300-10000_cl_sm2.00.img.gz, (228, 211) - (357, 340)
[Thu Aug 23 01:52:01 2012] XMMSAS bgd. selection expression = annulus(25389.671400, 23912.000800, 5580.036161, 11160.072321, X, Y) && !ellipse(26771.849600, 29665.380000, 1368.969639, 1368.969639, 0.000000, X, Y) && !ellipse(21461.037979, 28744.873230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24313.685089, 35622.312439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20664.218000, 35077.026000, 1607.168046, 1607.168046, 0.000000, X, Y) && !ellipse(15785.246445, 35017.613586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24574.114258, 35009.295380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21014.683124, 34450.652818, 2227.424064, 1524.618146, 217.050000, X, Y) && !ellipse(24872.858154, 34231.831116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21198.223400, 33871.712000, 847.896024, 847.896024, 0.000000, X, Y) && !ellipse(25120.423706, 33715.135864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21372.294000, 33256.462000, 1309.200038, 1309.200038, 0.000000, X, Y) && !ellipse(25373.299316, 33024.371582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25577.802948, 32480.422455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34662.293671, 32751.843445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21629.169800, 32890.733000, 1570.296045, 401.567212, 67.449000, X, Y) && !ellipse(24834.402710, 32385.104248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22251.014000, 31422.224000, 1488.416043, 1488.416043, 0.000000, X, Y) && !ellipse(25888.794495, 31695.558624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24279.963562, 31542.822754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26009.747009, 31081.113159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30527.369629, 30995.440674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27283.706549, 30434.845602, 1029.282491, 229.367294, 121.374598, X, Y) && !ellipse(22347.029400, 31103.794600, 1427.680041, 479.231214, 63.954400, X, Y) && !ellipse(22596.908000, 30483.980000, 1366.744039, 1366.744039, 0.000000, X, Y) && !ellipse(22755.708000, 29979.422000, 1337.360038, 1337.360038, 0.000000, X, Y) && !ellipse(27807.732849, 29816.148346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23332.293800, 28845.870600, 1287.000037, 422.717612, 66.944000, X, Y) && !ellipse(23436.900000, 28545.312000, 1231.656035, 1231.656035, 0.000000, X, Y) && !ellipse(23742.290000, 27694.066000, 1560.040045, 1560.040045, 0.000000, X, Y) && !ellipse(27733.864624, 27527.985687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27871.567719, 27105.443085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.725100, 27237.053026, 1180.608034, 380.192130, 69.349822, X, Y) && !ellipse(28071.560455, 26658.689270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24577.922200, 25826.776000, 1130.432033, 1130.432033, 0.000000, X, Y) && !ellipse(28312.236206, 25961.029877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28745.574158, 24926.553467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15882.903732, 24107.049469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21411.894714, 24007.849609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31139.053864, 22556.793793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27746.469000, 22642.793000, 374.764811, 374.764811, 0.000000, X, Y) && !ellipse(26034.810486, 22782.497833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21941.612885, 22146.030228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32537.424400, 20929.824800, 414.133612, 414.133612, 0.000000, X, Y) && !ellipse(27869.650787, 20920.497910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28856.044617, 20469.850494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22306.668793, 17930.237976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33038.114014, 16547.448273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29090.310300, 16640.942800, 415.444812, 415.444812, 0.000000, X, Y) && !ellipse(30646.357422, 16371.706573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27846.424000, 15842.702000, 1695.824049, 1695.824049, 0.000000, X, Y) && !ellipse(26221.113892, 16066.318466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24853.817052, 25283.308000, 1188.384034, 1020.343485, 55.965868, X, Y)
[Thu Aug 23 01:52:01 2012] Writing fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src1.gif
[Thu Aug 23 01:52:25 2012] Mean detx,y = (199.65, -161.49) 
[Thu Aug 23 01:52:30 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 01:56:21 2012] grppha failed
[Thu Aug 23 01:56:22 2012] Setting source spectrum file to fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Aug 23 01:56:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug 23 03:21:45 2012] Updating aperture counts using extracted products
[Thu Aug 23 03:21:45 2012] Error reading totcts from fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Aug 23 03:21:46 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 03:21:50 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Aug 23 03:21:50 2012] Source 1 has no response, skipping
[Thu Aug 23 03:21:51 2012] xmm0112830501/analysis//spectral/fullrun_pn_xmm0112830501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete