[Wed Aug 22 10:25:19 2012] Detection parameters:
  Position = (358.4, 259.8) = 12 10 8.03 39 23 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.4 +/- 19.9
  Background counts = 7.4
  Rate = 0.02 +/- 0.001

[Wed Aug 22 10:25:21 2012] Off-axis axis estimate = 5.17'
[Wed Aug 22 17:18:29 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 17:18:29 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Wed Aug 22 17:18:29 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.945
[Wed Aug 22 17:18:29 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.01"
[Wed Aug 22 19:33:36 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src5.ximg exists
[Wed Aug 22 19:33:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src5.csv
[Wed Aug 22 19:33:36 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Aug 22 19:33:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src5.csv
[Wed Aug 22 19:33:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 19:33:36 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Aug 22 19:33:36 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Aug 22 19:33:36 2012] Fit fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Aug 22 19:34:14 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.612574 pixels away
[Wed Aug 22 19:34:14 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.484452 pixels away
[Wed Aug 22 19:34:15 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 19:34:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 19:34:15 2012] Assessing source extent using major
[Wed Aug 22 19:34:15 2012] Source does appear to be extended
[Wed Aug 22 19:34:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 23:29:34 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 23:29:34 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Wed Aug 22 23:29:34 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.945
[Wed Aug 22 23:29:34 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.01"
[Thu Aug 23 01:51:24 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src5.ximg exists
[Thu Aug 23 01:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src5.csv
[Thu Aug 23 01:51:25 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Aug 23 01:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src5.csv
[Thu Aug 23 01:51:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 01:51:25 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Aug 23 01:51:25 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Aug 23 01:51:25 2012] Fit fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Aug 23 01:51:50 2012] Spatial fit model total counts = 321.998000, observed total counts = 322.000000
[Thu Aug 23 01:51:50 2012] Offset between fit and detection position for source 4 = 0.085674 pixels
[Thu Aug 23 01:51:50 2012] 322.146000 total counts/ 160.996000 bgd. counts: snr = 12.700557
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.085674 pixels
  Position = (358.4, 259.7) = 12 10 8.03 39 23 12.4
  Extent = 4.0 (3.5-4.7)", rotation angle = 0
  Source counts = 161.2 +/- 17.9
  Background counts = 161.0
  Rate = 0.007 +/- 0.0008
[Thu Aug 23 01:51:50 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 01:51:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 01:51:50 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 01:51:50 2012] Source does appear to be extended
[Thu Aug 23 01:51:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 03:08:08 2012] XMMSAS src. selection expression = ellipse(31129.355400, 22545.325200, 240.657007, 240.657007, 0.000000, X, Y)
[Thu Aug 23 03:08:08 2012] Writing source region out to fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src4_src.reg
[Thu Aug 23 03:08:08 2012] Extracting stamp from image fullrun_mos2_xmm0112830501_pi300-10000_cl_sm2.00.img.gz, (345, 246) - (372, 274)
[Thu Aug 23 03:08:08 2012] XMMSAS bgd. selection expression = annulus(31129.355400, 22545.325200, 401.095012, 802.190023, X, Y)
[Thu Aug 23 03:08:08 2012] Writing fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src4.gif
[Thu Aug 23 03:16:07 2012] Mean detx,y = (4741.37, 3461.24) 
[Thu Aug 23 03:16:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 03:16:14 2012] grppha failed
[Thu Aug 23 03:16:14 2012] Setting source spectrum file to fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src4_src.pi.gz
[Thu Aug 23 03:16:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Aug 23 03:21:46 2012] Updating aperture counts using extracted products
[Thu Aug 23 03:21:46 2012] Error reading totcts from fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src4_src.pi.gz
[Thu Aug 23 03:21:46 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 03:21:49 2012] Source 4 has no response, skipping
[Thu Aug 23 03:21:50 2012] xmm0112830501/analysis//spectral/fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete