[Wed Aug 22 10:25:20 2012] Detection parameters:
  Position = (302.2, 185.1) = 12 10 29.11 39 17 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.1 +/- 13.1
  Background counts = 6.0
  Rate = 0.008 +/- 0.001

[Wed Aug 22 10:25:21 2012] Off-axis axis estimate = 8.22'
[Wed Aug 22 17:18:29 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 17:18:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 22 17:18:29 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Wed Aug 22 17:18:29 2012] source mask rpix=2.4, npix_max = 34, mask sum = 34, frac = 0.995
[Wed Aug 22 17:18:29 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.54"
[Wed Aug 22 19:33:36 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src7.ximg exists
[Wed Aug 22 19:33:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src7.csv
[Wed Aug 22 19:33:36 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Aug 22 19:33:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src7.csv
[Wed Aug 22 19:33:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 19:33:36 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Aug 22 19:33:36 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Aug 22 19:33:36 2012] Fit fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Aug 22 19:34:14 2012] Spatial fit model total counts = 165.893000, observed total counts = 175.000000
[Wed Aug 22 19:34:14 2012] Offset between fit and detection position for source 13 = 0.129188 pixels
[Wed Aug 22 19:34:14 2012] 162.961200 total counts/ 72.537900 bgd. counts: snr = 10.616903
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.129188 pixels
  Position = (302.2, 185.3) = 12 10 29.12 39 17 48.7
  Extent = 6.6 (5.2-7.8)", rotation angle = 0
  Source counts = 90.4 +/- 12.8
  Background counts = 72.5
  Rate = 0.004 +/- 0.0006
[Wed Aug 22 19:34:15 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 19:34:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 19:34:15 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 19:34:15 2012] Source does appear to be extended
[Wed Aug 22 19:34:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 23:29:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 22 23:29:34 2012] Initial guess for spatial extent in simple fitting = 6.59"
[Wed Aug 22 23:29:34 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.984
[Wed Aug 22 23:29:34 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 6.59"
[Thu Aug 23 01:51:25 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src7.ximg exists
[Thu Aug 23 01:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src7.csv
[Thu Aug 23 01:51:25 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Aug 23 01:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src7.csv
[Thu Aug 23 01:51:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 01:51:25 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Aug 23 01:51:25 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Aug 23 01:51:25 2012] Fit fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Aug 23 01:51:50 2012] Spatial fit model total counts = 167.023000, observed total counts = 175.000000
[Thu Aug 23 01:51:50 2012] Offset between fit and detection position for source 13 = 0.024018 pixels
[Thu Aug 23 01:51:50 2012] 164.238400 total counts/ 73.110200 bgd. counts: snr = 10.657708
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.024018 pixels
  Position = (302.2, 185.3) = 12 10 29.12 39 17 48.6
  Extent = 6.5 (5.2-7.8)", rotation angle = 0
  Source counts = 91.1 +/- 12.8
  Background counts = 73.1
  Rate = 0.004 +/- 0.0006
[Thu Aug 23 01:51:50 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 01:51:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 01:51:50 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 01:51:50 2012] Source does appear to be extended
[Thu Aug 23 01:51:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 03:08:08 2012] XMMSAS src. selection expression = ellipse(26240.424060, 16068.426600, 388.485611, 388.485611, 0.000000, X, Y)
[Thu Aug 23 03:08:08 2012] Writing source region out to fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src13_src.reg
[Thu Aug 23 03:08:08 2012] Extracting stamp from image fullrun_mos2_xmm0112830501_pi300-10000_cl_sm2.00.img.gz, (280, 163) - (324, 208)
[Thu Aug 23 03:08:08 2012] XMMSAS bgd. selection expression = annulus(26240.424060, 16068.426600, 647.476019, 1294.952037, X, Y)
[Thu Aug 23 03:08:08 2012] Writing fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src13.gif
[Thu Aug 23 03:16:30 2012] Mean detx,y = (-2232.40, 7616.82) 
[Thu Aug 23 03:16:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 03:16:41 2012] grppha failed
[Thu Aug 23 03:16:41 2012] Setting source spectrum file to fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src13_src.pi.gz
[Thu Aug 23 03:16:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Aug 23 03:21:14 2012] Not generating rmf since there are only 91 counts
[Thu Aug 23 03:21:14 2012] rmf not generated due to insufficient counts
[Thu Aug 23 03:21:46 2012] Updating aperture counts using extracted products
[Thu Aug 23 03:21:46 2012] Error reading totcts from fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src13_src.pi.gz
[Thu Aug 23 03:21:46 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 03:21:49 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Aug 23 03:21:50 2012] xmm0112830501/analysis//spectral/fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete