[Wed Aug 22 10:25:19 2012] Detection parameters:
  Position = (286.2, 268.9) = 12 10 35.12 39 23 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.1 +/- 22.5
  Background counts = 10.5
  Rate = 0.009 +/- 0.001

[Wed Aug 22 10:25:21 2012] Off-axis axis estimate = 2.32'
[Wed Aug 22 17:18:29 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 17:18:29 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Wed Aug 22 17:18:29 2012] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.695
[Wed Aug 22 17:18:29 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.59"
[Wed Aug 22 19:33:36 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src6.ximg exists
[Wed Aug 22 19:33:36 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Aug 22 19:33:36 2012] Fit fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_src6 appears to have run properly
[Wed Aug 22 19:33:36 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Aug 22 19:33:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Aug 22 19:33:36 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Aug 22 19:33:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Aug 22 19:33:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830501_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 19:34:14 2012] Warning, spatial fit 6 centroid is now closest to src. 3
[Wed Aug 22 19:34:15 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 19:34:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 19:34:15 2012] Assessing source extent using major
[Wed Aug 22 19:34:15 2012] Source does appear to be extended
[Wed Aug 22 19:34:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 23:29:34 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 23:29:34 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Wed Aug 22 23:29:34 2012] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.695
[Wed Aug 22 23:29:34 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.59"
[Thu Aug 23 01:51:25 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src6.ximg exists
[Thu Aug 23 01:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src6.csv
[Thu Aug 23 01:51:25 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Aug 23 01:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src6.csv
[Thu Aug 23 01:51:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 01:51:25 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Aug 23 01:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Aug 23 01:51:25 2012] fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Aug 23 01:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Aug 23 01:51:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830501_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 01:51:50 2012] Source 10 is offset by -6.875068 and -7.098607 pixels which is larger than
2 X fitted extent = 2.247499 x 2.247499, not incorporating fit results
[Thu Aug 23 01:51:50 2012] Warning, spatial fit 6 centroid is now closest to src. 1
[Thu Aug 23 01:51:50 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 141.902108 pixels away
[Thu Aug 23 01:51:50 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 01:51:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 01:51:50 2012] Assessing source extent using major
[Thu Aug 23 01:51:50 2012] Source does appear to be extended
[Thu Aug 23 01:51:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 01:51:50 2012] Source is confused with source 36
[Thu Aug 23 03:08:08 2012] XMMSAS src. selection expression = ellipse(24848.623047, 23348.295197, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 23 03:08:08 2012] Writing source region out to fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src10_src.reg
[Thu Aug 23 03:08:08 2012] Extracting stamp from image fullrun_mos2_xmm0112830501_pi300-10000_cl_sm2.00.img.gz, (249, 231) - (324, 306)
[Thu Aug 23 03:08:08 2012] XMMSAS bgd. selection expression = annulus(24848.623047, 23348.295197, 1087.500000, 2175.000000, X, Y) && !ellipse(25375.967600, 23914.544000, 1510.495243, 1406.752840, 28.242867, X, Y) && !ellipse(26271.898000, 24357.898000, 784.503223, 784.503223, 0.000000, X, Y) && !ellipse(27743.385559, 22621.069397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24290.416412, 24638.259766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26884.709259, 24837.724152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23970.384000, 24266.548800, 2140.144062, 267.517608, 5.531610, X, Y)
[Thu Aug 23 03:08:08 2012] Writing fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src10.gif
[Thu Aug 23 03:16:16 2012] Mean detx,y = (-381.02, 194.79) 
[Thu Aug 23 03:16:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 03:16:27 2012] grppha failed
[Thu Aug 23 03:16:27 2012] Setting source spectrum file to fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src10_src.pi.gz
[Thu Aug 23 03:16:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Aug 23 03:21:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 23 03:21:14 2012] rmf not generated due to insufficient counts
[Thu Aug 23 03:21:46 2012] Updating aperture counts using extracted products
[Thu Aug 23 03:21:46 2012] Error reading totcts from fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src10_src.pi.gz
[Thu Aug 23 03:21:46 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 03:21:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 23 03:21:50 2012] xmm0112830501/analysis//spectral/fullrun_mos2_xmm0112830501_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete