[Sat May 26 06:42:21 2012] Detection parameters:
  Position = (241.4, 381.1) = 9 47 58.45 -30 49 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 489.7 +/- 28.7
  Background counts = 23.1
  Rate = 0.04 +/- 0.002

[Sat May 26 06:42:22 2012] Off-axis axis estimate = 7.28'
[Sat May 26 06:44:43 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sat May 26 06:44:43 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Sat May 26 06:44:43 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.947
[Sat May 26 06:44:43 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.07"
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src6.ximg exists
[Sat May 26 08:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src6.csv
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat May 26 08:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src6.csv
[Sat May 26 08:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat May 26 08:48:07 2012] Fit fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat May 26 09:48:26 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.542602 pixels away
[Sat May 26 09:48:26 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:48:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:48:26 2012] Assessing source extent using major
[Sat May 26 09:48:26 2012] Source does appear to be extended
[Sat May 26 09:48:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 09:48:26 2012] Source is confused with source 8
[Sat May 26 09:48:26 2012] Source is confused with source 9
[Sat May 26 09:48:39 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sat May 26 09:48:39 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Sat May 26 09:48:39 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.947
[Sat May 26 09:48:39 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.07"
[Sat May 26 12:30:54 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src4.ximg exists
[Sat May 26 12:30:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src4.csv
[Sat May 26 12:30:54 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat May 26 12:30:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src4.csv
[Sat May 26 12:30:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 26 12:30:55 2012] Fit fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat May 26 13:29:20 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.542602 pixels away
[Sat May 26 13:29:20 2012] Source 7 is offset by -1.678570 and -0.653093 pixels which is larger than
2 X fitted extent = 1.445853 x 1.445853, not incorporating fit results
[Sat May 26 13:29:20 2012] Vigneting correction estimate = 1.000000
[Sat May 26 13:29:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 13:29:20 2012] Assessing source extent using major
[Sat May 26 13:29:20 2012] Source does appear to be extended
[Sat May 26 13:29:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 13:29:29 2012] XMMSAS src. selection expression = ellipse(20949.128418, 33103.472870, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 26 13:29:29 2012] Writing source region out to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src7_src.reg
[Sat May 26 13:29:29 2012] Extracting stamp from image fullrun_pn_xmm0112830401_pi300-10000_cl_sm2.00.img.gz, (204, 344) - (279, 419)
[Sat May 26 13:29:29 2012] XMMSAS bgd. selection expression = annulus(20949.128418, 33103.472870, 1087.500000, 2175.000000, X, Y) && !ellipse(19712.298950, 35532.134369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19408.878000, 36080.088000, 1407.784041, 1407.784041, 0.000000, X, Y) && !ellipse(21195.279940, 32616.915282, 2742.944079, 522.227215, 63.901200, X, Y) && !ellipse(21361.524000, 32221.246000, 1442.320042, 1442.320042, 0.000000, X, Y) && !ellipse(21650.191600, 31737.148000, 1437.128041, 406.847212, 63.582200, X, Y) && !ellipse(22111.770000, 30657.334000, 1371.472039, 1371.472039, 0.000000, X, Y) && !ellipse(22402.450600, 30216.545180, 2742.944079, 439.830966, 62.695085, X, Y) && !ellipse(22841.238200, 29367.811400, 2742.944079, 474.648814, 62.546800, X, Y)
[Sat May 26 13:29:29 2012] Writing fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src7.gif
[Sat May 26 13:44:50 2012] Mean detx,y = (142.83, 10138.61) 
[Sat May 26 13:44:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 13:45:16 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 13:45:16 2012] Setting source spectrum file to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat May 26 13:45:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat May 26 16:31:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 26 16:31:45 2012] rmf not generated due to insufficient counts
[Sat May 26 18:21:26 2012] Updating aperture counts using extracted products
[Sat May 26 18:21:26 2012] Error reading totcts from fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat May 26 18:21:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 18:21:28 2012] Using photon index=1.80, rate=0.0424, arf fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src7.arf
[Sat May 26 18:21:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 18:21:28 2012] Updating source flux to 2.4e-13
[Sat May 26 18:22:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting