[Sat May 26 06:42:22 2012] Detection parameters:
  Position = (451.8, 174.6) = 9 46 47.26 -31 4 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.8 +/- 10.3
  Background counts = 17.2
  Rate = 0.002 +/- 0.0005

[Sat May 26 06:42:22 2012] Off-axis axis estimate = 14.29'
[Sat May 26 06:44:43 2012] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Sat May 26 06:44:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 26 06:44:43 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Sat May 26 06:44:43 2012] source mask rpix=3.1, npix_max = 52, mask sum = 30, frac = 0.572
[Sat May 26 06:44:43 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 13.57"
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src44.ximg exists
[Sat May 26 08:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src44.csv
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src44_1.ximg exists
[Sat May 26 08:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src44.csv
[Sat May 26 08:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:48:08 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sat May 26 08:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sat May 26 08:48:08 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sat May 26 08:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sat May 26 08:48:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 09:48:26 2012] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 16.864679 pixels away
[Sat May 26 09:48:26 2012] Source 45 is offset by 3.964229 and -4.153416 pixels which is larger than
2 X fitted extent = 1.535954 x 1.535954, not incorporating fit results
[Sat May 26 09:48:26 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:48:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:48:26 2012] Assessing source extent using major
[Sat May 26 09:48:26 2012] Source does appear to be extended
[Sat May 26 09:48:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 09:48:26 2012] Deleting source due to low Poisson probability 0.9