[Sat May 26 06:42:21 2012] Detection parameters:
  Position = (230.9, 402.0) = 9 48 1.96 -30 47 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 628.9 +/- 32.2
  Background counts = 21.9
  Rate = 0.03 +/- 0.001

[Sat May 26 06:42:22 2012] Off-axis axis estimate = 8.96'
[Sat May 26 06:44:43 2012] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Sat May 26 06:44:43 2012] Initial guess for spatial extent in simple fitting = 10.91"
[Sat May 26 06:44:43 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Sat May 26 06:44:43 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.91"
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src3.ximg exists
[Sat May 26 08:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src3.csv
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May 26 08:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src3.csv
[Sat May 26 08:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May 26 08:48:07 2012] Fit fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat May 26 09:48:26 2012] Warning, spatial fit 3 centroid is now closest to src. 3
[Sat May 26 09:48:26 2012] Spatial fit model total counts = 378.666000, observed total counts = 368.000000
[Sat May 26 09:48:26 2012] Offset between fit and detection position for source 4 = 9.435923 pixels
[Sat May 26 09:48:26 2012] Warning, changing simple spatial fit ID from 3 to 18
[Sat May 26 09:48:26 2012] 376.409027 total counts/ 376.409000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 9.435923 pixels
  Position = (221.6, 400.6) = 9 48 5.11 -30 47 44.1
  Extent = 22.0 (21.9-43.9)", rotation angle = 0
  Source counts = 0.0 +/- 19.4
  Background counts = 376.4
  Rate = 1e-09 +/- 0.0009
  Deleting source due to low Poisson probability