[Sat May 26 06:42:21 2012] Detection parameters:
  Position = (308.3, 265.5) = 9 47 35.83 -30 57 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.4 +/- 25.7
  Background counts = 37.0
  Rate = 0.01 +/- 0.002

[Sat May 26 06:42:22 2012] Off-axis axis estimate = 2.49'
[Sat May 26 06:44:43 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sat May 26 06:44:43 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Sat May 26 06:44:43 2012] source mask rpix=1.8, npix_max = 20, mask sum = 24, frac = 1.171
[Sat May 26 06:44:43 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.67"
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src35.ximg exists
[Sat May 26 08:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src35.csv
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src35_1.ximg exists
[Sat May 26 08:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src35.csv
[Sat May 26 08:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:48:08 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sat May 26 08:48:08 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sat May 26 08:48:08 2012] Fit fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Sat May 26 09:48:26 2012] Source 36 is offset by 7.361489 and -6.477253 pixels which is larger than
2 X fitted extent = 2.480740 x 2.480740, not incorporating fit results
[Sat May 26 09:48:26 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:48:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:48:26 2012] Assessing source extent using major
[Sat May 26 09:48:26 2012] Source does appear to be extended
[Sat May 26 09:48:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 09:48:39 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sat May 26 09:48:39 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Sat May 26 09:48:39 2012] source mask rpix=1.8, npix_max = 20, mask sum = 24, frac = 1.171
[Sat May 26 09:48:39 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.67"
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src25.ximg exists
[Sat May 26 12:30:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src25.csv
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat May 26 12:30:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src25.csv
[Sat May 26 12:30:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat May 26 12:30:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat May 26 12:30:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat May 26 12:30:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 13:29:20 2012] Source 36 is offset by 7.361489 and -6.524908 pixels which is larger than
2 X fitted extent = 2.217940 x 2.217940, not incorporating fit results
[Sat May 26 13:29:20 2012] Source 36 is offset by 6.899650 and 0.136540 pixels which is larger than
2 X fitted extent = 2.811177 x 2.811177, not incorporating fit results
[Sat May 26 13:29:20 2012] Vigneting correction estimate = 1.000000
[Sat May 26 13:29:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 13:29:20 2012] Assessing source extent using major
[Sat May 26 13:29:20 2012] Source does appear to be extended
[Sat May 26 13:29:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 13:29:29 2012] XMMSAS src. selection expression = ellipse(26774.071533, 23053.725006, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 26 13:29:29 2012] Writing source region out to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src36_src.reg
[Sat May 26 13:29:29 2012] Extracting stamp from image fullrun_pn_xmm0112830401_pi300-10000_cl_sm2.00.img.gz, (271, 228) - (346, 303)
[Sat May 26 13:29:29 2012] XMMSAS bgd. selection expression = annulus(26774.071533, 23053.725006, 1087.500000, 2175.000000, X, Y) && !ellipse(25573.374359, 22722.958801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25659.788000, 23767.871600, 1594.728046, 1594.728046, 0.000000, X, Y) && !ellipse(24899.218000, 25233.828000, 1113.344032, 1113.344032, 0.000000, X, Y) && !ellipse(25479.011963, 22250.313141, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 26 13:29:29 2012] Writing fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src36.gif
[Sat May 26 15:14:40 2012] Mean detx,y = (-413.96, -1366.46) 
[Sat May 26 15:14:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 15:15:12 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 15:15:12 2012] Setting source spectrum file to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat May 26 15:15:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat May 26 17:28:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 26 17:28:45 2012] rmf not generated due to insufficient counts
[Sat May 26 18:21:28 2012] Updating aperture counts using extracted products
[Sat May 26 18:21:28 2012] Error reading totcts from fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat May 26 18:21:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 18:21:28 2012] Using photon index=1.80, rate=0.0101, arf fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src36.arf
[Sat May 26 18:21:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 18:21:28 2012] Updating source flux to 2.9e-14
[Sat May 26 18:22:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting