[Sat May 26 06:42:21 2012] Detection parameters:
  Position = (276.4, 312.0) = 9 47 46.61 -30 54 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 527.6 +/- 30.8
  Background counts = 36.6
  Rate = 0.03 +/- 0.002

[Sat May 26 06:42:22 2012] Off-axis axis estimate = 1.88'
[Sat May 26 06:44:43 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Sat May 26 06:44:43 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Sat May 26 06:44:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.039
[Sat May 26 06:44:43 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.37"
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src30.ximg exists
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat May 26 08:48:07 2012] Fit fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src30 appears to have run properly
[Sat May 26 08:48:08 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat May 26 08:48:08 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat May 26 08:48:08 2012] Fit fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sat May 26 09:48:26 2012] Spatial fit model total counts = 1933.350000, observed total counts = 1957.000000
[Sat May 26 09:48:26 2012] Offset between fit and detection position for source 31 = 1.769285 pixels
[Sat May 26 09:48:26 2012] Warning, changing simple spatial fit ID from 30 to 29
[Sat May 26 09:48:26 2012] 1953.868000 total counts/ 602.318000 bgd. counts: snr = 55.070522
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.769285 pixels
  Position = (275.8, 313.7) = 9 47 46.83 -30 54 2.5
  Extent = 15.2 (15.1-30.3)", rotation angle = 0
  Source counts = 1351.5 +/- 44.2
  Background counts = 602.3
  Rate = 0.06 +/- 0.002
[Sat May 26 09:48:26 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:48:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:48:26 2012] Assessing source extent using major axis lower bound
[Sat May 26 09:48:26 2012] Source does appear to be extended
[Sat May 26 09:48:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 09:48:26 2012] Source is confused with source 16
[Sat May 26 09:48:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 09:48:39 2012] Initial guess for spatial extent in simple fitting = 15.15"
[Sat May 26 09:48:39 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.008
[Sat May 26 09:48:39 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 15.15"
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src21.ximg exists
[Sat May 26 12:30:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src21.csv
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat May 26 12:30:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src21.csv
[Sat May 26 12:30:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat May 26 12:30:55 2012] Fit fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat May 26 13:29:20 2012] Spatial fit model total counts = 1940.490000, observed total counts = 1957.000000
[Sat May 26 13:29:20 2012] Offset between fit and detection position for source 31 = 0.132229 pixels
[Sat May 26 13:29:20 2012] Warning, changing simple spatial fit ID from 21 to 20
[Sat May 26 13:29:20 2012] 1960.326000 total counts/ 613.286000 bgd. counts: snr = 54.393746
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.132229 pixels
  Position = (275.6, 313.6) = 9 47 46.87 -30 54 2.7
  Extent = 15.1 (15.1-15.2)", rotation angle = 0
  Source counts = 1347.0 +/- 44.3
  Background counts = 613.3
  Rate = 0.06 +/- 0.002
[Sat May 26 13:29:20 2012] Vigneting correction estimate = 1.000000
[Sat May 26 13:29:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 13:29:20 2012] Assessing source extent using major axis lower bound
[Sat May 26 13:29:20 2012] Source does appear to be extended
[Sat May 26 13:29:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 13:29:29 2012] Counts = 1347.040000, rescaling region sizes by 2.000000
[Sat May 26 13:29:29 2012] XMMSAS src. selection expression = ellipse(23932.910000, 27235.820000, 1817.796052, 1817.796052, 0.000000, X, Y)
[Sat May 26 13:29:29 2012] Writing source region out to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src31_src.reg
[Sat May 26 13:29:29 2012] Extracting stamp from image fullrun_pn_xmm0112830401_pi300-10000_cl_sm2.00.img.gz, (171, 209) - (380, 418)
[Sat May 26 13:29:29 2012] XMMSAS bgd. selection expression = annulus(23932.910000, 27235.820000, 6059.320174, 12118.640349, X, Y) && !ellipse(25573.374359, 22722.958801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25659.788000, 23767.871600, 1594.728046, 1594.728046, 0.000000, X, Y) && !ellipse(19712.298950, 35532.134369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19408.878000, 36080.088000, 1407.784041, 1407.784041, 0.000000, X, Y) && !ellipse(20949.128418, 33103.472870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21195.279940, 32616.915282, 2742.944079, 522.227215, 63.901200, X, Y) && !ellipse(21361.524000, 32221.246000, 1442.320042, 1442.320042, 0.000000, X, Y) && !ellipse(21650.191600, 31737.148000, 1437.128041, 406.847212, 63.582200, X, Y) && !ellipse(22111.770000, 30657.334000, 1371.472039, 1371.472039, 0.000000, X, Y) && !ellipse(22402.450600, 30216.545180, 2742.944079, 439.830966, 62.695085, X, Y) && !ellipse(22841.238200, 29367.811400, 2742.944079, 474.648814, 62.546800, X, Y) && !ellipse(22910.656000, 29176.640000, 1284.096037, 1284.096037, 0.000000, X, Y) && !ellipse(23473.713200, 28082.370800, 1604.696046, 397.662411, 61.755000, X, Y) && !ellipse(24228.446000, 26545.618000, 1123.120032, 1123.120032, 0.000000, X, Y) && !ellipse(19147.406000, 36599.290000, 1268.320036, 1268.320036, 0.000000, X, Y) && !ellipse(29209.851166, 32188.624115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13958.448400, 31316.539200, 819.688024, 819.688024, 0.000000, X, Y) && !ellipse(23415.850000, 28205.428000, 1284.080037, 1284.080037, 0.000000, X, Y) && !ellipse(17537.138321, 28119.887299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23748.870087, 27620.181580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24899.218000, 25233.828000, 1113.344032, 1113.344032, 0.000000, X, Y) && !ellipse(12865.081940, 25723.362274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26774.071533, 23053.725006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23213.743622, 22596.106812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25479.011963, 22250.313141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25278.939575, 19434.744843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34944.347359, 17868.389015, 564.193669, 367.790205, 116.777471, X, Y) && !ellipse(22872.571000, 14847.778800, 415.142412, 415.142412, 0.000000, X, Y)
[Sat May 26 13:29:29 2012] Writing fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src31.gif
[Sat May 26 15:02:34 2012] Mean detx,y = (136.95, 3351.58) 
[Sat May 26 15:02:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 15:08:53 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 15:08:53 2012] Setting source spectrum file to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat May 26 15:08:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat May 26 18:21:27 2012] Updating aperture counts using extracted products
[Sat May 26 18:21:28 2012] Error reading totcts from fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat May 26 18:21:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 18:21:28 2012] Using photon index=1.80, rate=0.0622, arf fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src31.arf
[Sat May 26 18:21:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 18:21:28 2012] Updating source flux to 1.6e-13
[Sat May 26 18:22:36 2012] Flag c found in src. 31 procflags, skipping spectral fitting