[Sat May 26 06:42:21 2012] Detection parameters:
  Position = (267.3, 330.0) = 9 47 49.68 -30 52 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 427.2 +/- 28.3
  Background counts = 31.5
  Rate = 0.03 +/- 0.002

[Sat May 26 06:42:22 2012] Off-axis axis estimate = 3.21'
[Sat May 26 06:44:43 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Sat May 26 06:44:43 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Sat May 26 06:44:43 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.907
[Sat May 26 06:44:43 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 8.04"
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src26.ximg exists
[Sat May 26 08:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src26.csv
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat May 26 08:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src26.csv
[Sat May 26 08:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:48:08 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat May 26 08:48:08 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat May 26 08:48:08 2012] Fit fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sat May 26 09:48:26 2012] Warning, spatial fit 26 centroid is now closest to src. 14
[Sat May 26 09:48:26 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:48:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:48:26 2012] Assessing source extent using major
[Sat May 26 09:48:26 2012] Source does appear to be extended
[Sat May 26 09:48:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 09:48:26 2012] Source is confused with source 13
[Sat May 26 09:48:39 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Sat May 26 09:48:39 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Sat May 26 09:48:39 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.907
[Sat May 26 09:48:39 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 8.04"
[Sat May 26 12:30:54 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src18.ximg exists
[Sat May 26 12:30:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src18.csv
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat May 26 12:30:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src18.csv
[Sat May 26 12:30:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat May 26 12:30:55 2012] Fit fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sat May 26 13:29:20 2012] Spatial fit model total counts = 2570.790000, observed total counts = 2575.000000
[Sat May 26 13:29:20 2012] Offset between fit and detection position for source 27 = 3.057644 pixels
[Sat May 26 13:29:20 2012] Warning, changing simple spatial fit ID from 18 to 11
[Sat May 26 13:29:20 2012] 2013.814000 total counts/ 1311.600000 bgd. counts: snr = 19.389597
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 3.057644 pixels
  Position = (268.4, 327.2) = 9 47 49.32 -30 53 3.7
  Extent = 11.6 (10.8-12.8)", rotation angle = 0
  Source counts = 702.2 +/- 44.9
  Background counts = 1311.6
  Rate = 0.03 +/- 0.002
[Sat May 26 13:29:20 2012] Spatial fit model total counts = 1797.970000, observed total counts = 1812.000000
[Sat May 26 13:29:20 2012] Offset between fit and detection position for source 27 = 2.746445 pixels
[Sat May 26 13:29:20 2012] Warning, changing simple spatial fit ID from 11 to 18
[Sat May 26 13:29:20 2012] 1830.723000 total counts/ 629.483000 bgd. counts: snr = 47.878196
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.746445 pixels
  Position = (269.7, 324.8) = 9 47 48.88 -30 53 14.2
  Extent = 16.1 (16.0-16.1)", rotation angle = 0
  Source counts = 1201.2 +/- 42.8
  Background counts = 629.5
  Rate = 0.06 +/- 0.002
[Sat May 26 13:29:20 2012] Vigneting correction estimate = 1.000000
[Sat May 26 13:29:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 13:29:20 2012] Assessing source extent using major axis lower bound
[Sat May 26 13:29:20 2012] Source does appear to be extended
[Sat May 26 13:29:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 13:29:29 2012] Counts = 1201.240000, rescaling region sizes by 2.000000
[Sat May 26 13:29:29 2012] XMMSAS src. selection expression = ellipse(23415.850000, 28205.428000, 1926.120055, 1926.120055, 0.000000, X, Y)
[Sat May 26 13:29:29 2012] Writing source region out to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src27_src.reg
[Sat May 26 13:29:29 2012] Extracting stamp from image fullrun_pn_xmm0112830401_pi300-10000_cl_sm2.00.img.gz, (159, 214) - (380, 435)
[Sat May 26 13:29:29 2012] XMMSAS bgd. selection expression = annulus(23415.850000, 28205.428000, 6420.400185, 12840.800369, X, Y) && !ellipse(25573.374359, 22722.958801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25659.788000, 23767.871600, 1594.728046, 1594.728046, 0.000000, X, Y) && !ellipse(19712.298950, 35532.134369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19408.878000, 36080.088000, 1407.784041, 1407.784041, 0.000000, X, Y) && !ellipse(20949.128418, 33103.472870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21195.279940, 32616.915282, 2742.944079, 522.227215, 63.901200, X, Y) && !ellipse(21361.524000, 32221.246000, 1442.320042, 1442.320042, 0.000000, X, Y) && !ellipse(21650.191600, 31737.148000, 1437.128041, 406.847212, 63.582200, X, Y) && !ellipse(22111.770000, 30657.334000, 1371.472039, 1371.472039, 0.000000, X, Y) && !ellipse(22402.450600, 30216.545180, 2742.944079, 439.830966, 62.695085, X, Y) && !ellipse(22841.238200, 29367.811400, 2742.944079, 474.648814, 62.546800, X, Y) && !ellipse(22910.656000, 29176.640000, 1284.096037, 1284.096037, 0.000000, X, Y) && !ellipse(23473.713200, 28082.370800, 1604.696046, 397.662411, 61.755000, X, Y) && !ellipse(24228.446000, 26545.618000, 1123.120032, 1123.120032, 0.000000, X, Y) && !ellipse(19147.406000, 36599.290000, 1268.320036, 1268.320036, 0.000000, X, Y) && !ellipse(29209.851166, 32188.624115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13958.448400, 31316.539200, 819.688024, 819.688024, 0.000000, X, Y) && !ellipse(17537.138321, 28119.887299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23748.870087, 27620.181580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23932.910000, 27235.820000, 1211.864035, 1211.864035, 0.000000, X, Y) && !ellipse(24899.218000, 25233.828000, 1113.344032, 1113.344032, 0.000000, X, Y) && !ellipse(12865.081940, 25723.362274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26774.071533, 23053.725006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23213.743622, 22596.106812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25479.011963, 22250.313141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25278.939575, 19434.744843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34944.347359, 17868.389015, 564.193669, 367.790205, 116.777471, X, Y)
[Sat May 26 13:29:29 2012] Writing fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src27.gif
[Sat May 26 14:54:09 2012] Mean detx,y = (143.69, 4562.03) 
[Sat May 26 14:54:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 15:01:24 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 15:01:24 2012] Setting source spectrum file to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat May 26 15:01:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat May 26 18:21:27 2012] Updating aperture counts using extracted products
[Sat May 26 18:21:27 2012] Error reading totcts from fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat May 26 18:21:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 18:21:28 2012] Using photon index=1.80, rate=0.0554, arf fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src27.arf
[Sat May 26 18:21:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 18:21:28 2012] Updating source flux to 1.5e-13
[Sat May 26 18:22:36 2012] Flag c found in src. 27 procflags, skipping spectral fitting