[Sat May 26 06:42:21 2012] Detection parameters:
  Position = (282.2, 300.0) = 9 47 44.65 -30 55 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 611.1 +/- 34.7
  Background counts = 39.8
  Rate = 0.03 +/- 0.002

[Sat May 26 06:42:22 2012] Off-axis axis estimate = 1.18'
[Sat May 26 06:44:43 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Sat May 26 06:44:43 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Sat May 26 06:44:43 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Sat May 26 06:44:43 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.02"
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src15.ximg exists
[Sat May 26 08:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src15.csv
[Sat May 26 08:48:07 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat May 26 08:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src15.csv
[Sat May 26 08:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:48:08 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat May 26 08:48:08 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat May 26 08:48:08 2012] Fit fullrun_pn_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat May 26 09:48:26 2012] Spatial fit model total counts = 2664.540000, observed total counts = 2670.000000
[Sat May 26 09:48:26 2012] Offset between fit and detection position for source 16 = 6.512499 pixels
[Sat May 26 09:48:26 2012] 2607.630000 total counts/ 1582.150000 bgd. counts: snr = 25.781214
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 6.512499 pixels
  Position = (279.0, 305.7) = 9 47 45.72 -30 54 37.2
  Extent = 14.0 (14.0-28.1)", rotation angle = 0
  Source counts = 1025.5 +/- 51.1
  Background counts = 1582.2
  Rate = 0.05 +/- 0.002
[Sat May 26 09:48:26 2012] Source 16 is offset by -3.728345 and -0.546782 pixels which is larger than
2 X fitted extent = 0.846713 x 0.846713, not incorporating fit results
[Sat May 26 09:48:26 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:48:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:48:26 2012] Assessing source extent using major axis lower bound
[Sat May 26 09:48:26 2012] Source does appear to be extended
[Sat May 26 09:48:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 09:48:26 2012] Source is confused with source 31
[Sat May 26 09:48:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 09:48:39 2012] Initial guess for spatial extent in simple fitting = 14.04"
[Sat May 26 09:48:39 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.008
[Sat May 26 09:48:39 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 14.04"
[Sat May 26 12:30:54 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src13.ximg exists
[Sat May 26 12:30:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src13.csv
[Sat May 26 12:30:54 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat May 26 12:30:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src13.csv
[Sat May 26 12:30:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat May 26 12:30:55 2012] fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat May 26 12:30:55 2012] Fit fullrun_pn_xmm0112830401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat May 26 13:29:20 2012] Warning, spatial fit 13 centroid is now closest to src. 32
[Sat May 26 13:29:20 2012] Vigneting correction estimate = 1.000000
[Sat May 26 13:29:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 13:29:20 2012] Assessing source extent using major axis lower bound
[Sat May 26 13:29:20 2012] Source does appear to be extended
[Sat May 26 13:29:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 13:29:29 2012] Counts = 1025.480000, rescaling region sizes by 2.000000
[Sat May 26 13:29:29 2012] XMMSAS src. selection expression = ellipse(24228.446000, 26545.618000, 1684.680048, 1684.680048, 0.000000, X, Y)
[Sat May 26 13:29:29 2012] Writing source region out to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src16_src.reg
[Sat May 26 13:29:29 2012] Extracting stamp from image fullrun_pn_xmm0112830401_pi300-10000_cl_sm2.00.img.gz, (182, 209) - (376, 403)
[Sat May 26 13:29:29 2012] XMMSAS bgd. selection expression = annulus(24228.446000, 26545.618000, 5615.600162, 11231.200323, X, Y) && !ellipse(25573.374359, 22722.958801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25659.788000, 23767.871600, 1594.728046, 1594.728046, 0.000000, X, Y) && !ellipse(19712.298950, 35532.134369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19408.878000, 36080.088000, 1407.784041, 1407.784041, 0.000000, X, Y) && !ellipse(20949.128418, 33103.472870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21195.279940, 32616.915282, 2742.944079, 522.227215, 63.901200, X, Y) && !ellipse(21361.524000, 32221.246000, 1442.320042, 1442.320042, 0.000000, X, Y) && !ellipse(21650.191600, 31737.148000, 1437.128041, 406.847212, 63.582200, X, Y) && !ellipse(22111.770000, 30657.334000, 1371.472039, 1371.472039, 0.000000, X, Y) && !ellipse(22402.450600, 30216.545180, 2742.944079, 439.830966, 62.695085, X, Y) && !ellipse(22841.238200, 29367.811400, 2742.944079, 474.648814, 62.546800, X, Y) && !ellipse(22910.656000, 29176.640000, 1284.096037, 1284.096037, 0.000000, X, Y) && !ellipse(23473.713200, 28082.370800, 1604.696046, 397.662411, 61.755000, X, Y) && !ellipse(19147.406000, 36599.290000, 1268.320036, 1268.320036, 0.000000, X, Y) && !ellipse(29209.851166, 32188.624115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13958.448400, 31316.539200, 819.688024, 819.688024, 0.000000, X, Y) && !ellipse(23415.850000, 28205.428000, 1284.080037, 1284.080037, 0.000000, X, Y) && !ellipse(17537.138321, 28119.887299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23748.870087, 27620.181580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23932.910000, 27235.820000, 1211.864035, 1211.864035, 0.000000, X, Y) && !ellipse(24899.218000, 25233.828000, 1113.344032, 1113.344032, 0.000000, X, Y) && !ellipse(12865.081940, 25723.362274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26774.071533, 23053.725006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23213.743622, 22596.106812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25479.011963, 22250.313141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25278.939575, 19434.744843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34944.347359, 17868.389015, 564.193669, 367.790205, 116.777471, X, Y)
[Sat May 26 13:29:29 2012] Writing fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src16.gif
[Sat May 26 14:43:52 2012] Mean detx,y = (164.53, 2520.93) 
[Sat May 26 14:43:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 14:48:19 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 14:48:19 2012] Setting source spectrum file to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat May 26 14:48:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat May 26 18:21:27 2012] Updating aperture counts using extracted products
[Sat May 26 18:21:27 2012] Error reading totcts from fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat May 26 18:21:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 18:21:28 2012] Using photon index=1.80, rate=0.0473, arf fullrun_pn_xmm0112830401_pi300-10000_pass1_cl_src16.arf
[Sat May 26 18:21:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 18:21:28 2012] Updating source flux to 1.2e-13
[Sat May 26 18:22:36 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Sat May 26 18:22:36 2012] Flag c found in src. 16 procflags, skipping spectral fitting