[Sat May 26 06:43:05 2012] Detection parameters:
  Position = (450.4, 171.2) = 9 46 47.73 -31 4 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.5 +/- 10.8
  Background counts = 5.3
  Rate = 0.003 +/- 0.0004

[Sat May 26 06:43:05 2012] Off-axis axis estimate = 14.37'
[Sat May 26 09:05:33 2012] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting
[Sat May 26 09:05:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 26 09:05:33 2012] Initial guess for spatial extent in simple fitting = 13.61"
[Sat May 26 09:05:33 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.930
[Sat May 26 09:05:33 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 13.61"
[Sat May 26 09:48:17 2012] fullrun_mos2_xmm0112830401_pi300-10000_cl_pass0_src14.ximg exists
[Sat May 26 09:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830401_pi300-10000_cl_pass0_src14.csv
[Sat May 26 09:48:17 2012] fullrun_mos2_xmm0112830401_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat May 26 09:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830401_pi300-10000_cl_pass0_src14.csv
[Sat May 26 09:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 09:48:17 2012] fullrun_mos2_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat May 26 09:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat May 26 09:48:17 2012] fullrun_mos2_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat May 26 09:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat May 26 09:48:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 09:48:33 2012] Spatial fit model total counts = 124.986000, observed total counts = 110.000000
[Sat May 26 09:48:33 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 26 09:48:33 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:48:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:48:33 2012] Assessing source extent using major
[Sat May 26 09:48:33 2012] Source does appear to be extended
[Sat May 26 09:48:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 09:48:33 2012] Deleting source due to low Poisson probability 0.9