[Sat May 26 06:42:43 2012] Detection parameters:
  Position = (259.6, 168.9) = 9 47 52.33 -31 4 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.9 +/- 7.4
  Background counts = 7.5
  Rate = 0.002 +/- 0.0006

[Sat May 26 06:42:43 2012] Off-axis axis estimate = 9.81'
[Sat May 26 08:48:08 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Sat May 26 08:48:08 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Sat May 26 08:48:08 2012] source mask rpix=2.6, npix_max = 38, mask sum = 33, frac = 0.856
[Sat May 26 08:48:08 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.33"
[Sat May 26 09:05:33 2012] fullrun_mos1_xmm0112830401_pi300-10000_cl_pass0_src11.ximg exists
[Sat May 26 09:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830401_pi300-10000_cl_pass0_src11.csv
[Sat May 26 09:05:33 2012] fullrun_mos1_xmm0112830401_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat May 26 09:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830401_pi300-10000_cl_pass0_src11.csv
[Sat May 26 09:05:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 09:05:33 2012] fullrun_mos1_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat May 26 09:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat May 26 09:05:33 2012] fullrun_mos1_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat May 26 09:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat May 26 09:05:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 09:48:29 2012] Source 15 is offset by 7.179721 and -3.765505 pixels which is larger than
2 X fitted extent = 1.328524 x 1.328524, not incorporating fit results
[Sat May 26 09:48:29 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 10.065870 pixels away
[Sat May 26 09:48:29 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:48:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:48:29 2012] Assessing source extent using major
[Sat May 26 09:48:29 2012] Source does appear to be extended
[Sat May 26 09:48:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 09:48:29 2012] Deleting source due to low Poisson probability 0.7