[Sat Jun 16 21:00:32 2012] Detection parameters:
  Position = (320.9, 333.2) = 12 10 22.07 39 28 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.4 +/- 23.4
  Background counts = 71.6
  Rate = 0.004 +/- 0.0007

[Sat Jun 16 21:00:33 2012] Off-axis axis estimate = 3.00'
[Sat Jun 16 21:06:03 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 21:06:03 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Sat Jun 16 21:06:03 2012] source mask rpix=1.8, npix_max = 21, mask sum = 11, frac = 0.510
[Sat Jun 16 21:06:03 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 7.93"
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src68.ximg exists
[Sun Jun 17 02:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src68.csv
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src68_1.ximg exists
[Sun Jun 17 02:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src68.csv
[Sun Jun 17 02:17:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Sun Jun 17 02:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src68.csv
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Sun Jun 17 02:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src68.csv
[Sun Jun 17 02:17:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:18 2012] Source 71 is offset by 7.205720 and -5.465537 pixels which is larger than
2 X fitted extent = 4.371830 x 4.371830, not incorporating fit results
[Sun Jun 17 06:08:18 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:18 2012] Assessing source extent using major
[Sun Jun 17 06:08:18 2012] Source does appear to be extended
[Sun Jun 17 06:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 06:08:52 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 06:08:52 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Sun Jun 17 06:08:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 11, frac = 0.510
[Sun Jun 17 06:08:52 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 7.93"
[Sun Jun 17 10:00:15 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src58.ximg exists
[Sun Jun 17 10:00:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src58.csv
[Sun Jun 17 10:00:15 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src58_1.ximg exists
[Sun Jun 17 10:00:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src58.csv
[Sun Jun 17 10:00:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 10:00:18 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Sun Jun 17 10:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src58.csv
[Sun Jun 17 10:00:18 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Sun Jun 17 10:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src58.csv
[Sun Jun 17 10:00:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 13:02:56 2012] Source 71 is offset by 6.546399 and -5.486778 pixels which is larger than
2 X fitted extent = 4.329660 x 4.329660, not incorporating fit results
[Sun Jun 17 13:02:56 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:02:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:02:56 2012] Assessing source extent using major
[Sun Jun 17 13:02:56 2012] Source does appear to be extended
[Sun Jun 17 13:02:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 13:03:38 2012] XMMSAS src. selection expression = ellipse(27870.967682, 28943.270294, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 17 13:03:38 2012] Writing source region out to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src71_src.reg
[Sun Jun 17 13:03:38 2012] Extracting stamp from image fullrun_pn_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (283, 296) - (358, 371)
[Sun Jun 17 13:03:38 2012] XMMSAS bgd. selection expression = annulus(27870.967682, 28943.270294, 1087.500000, 2175.000000, X, Y) && !ellipse(26772.075400, 29650.521600, 1427.923241, 1427.923241, 0.000000, X, Y) && !ellipse(25841.009277, 31879.942444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26045.685486, 31349.302979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30551.132141, 30990.964294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28001.354600, 30953.479400, 361.645610, 361.645610, 0.000000, X, Y) && !ellipse(27248.113739, 30563.316071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25569.546000, 29299.470000, 1363.160039, 1286.000037, 79.523000, X, Y) && !ellipse(30289.505400, 29013.550600, 1314.136038, 864.648025, 337.950705, X, Y) && !ellipse(27663.174469, 27535.284363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23933.935780, 27401.812614, 1892.264054, 460.723213, 67.526000, X, Y) && !ellipse(28043.417145, 26656.931641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28209.205139, 26226.269958, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 17 13:03:38 2012] Writing fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src71.gif
[Sun Jun 17 15:22:34 2012] Mean detx,y = (-3949.67, 3636.39) 
[Sun Jun 17 15:22:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 15:22:54 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 15:22:54 2012] Setting source spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Sun Jun 17 15:22:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Sun Jun 17 18:30:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 17 18:30:42 2012] rmf not generated due to insufficient counts
[Sun Jun 17 22:37:10 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:10 2012] Error reading totcts from fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Sun Jun 17 22:37:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:11 2012] Using photon index=1.80, rate=0.00429, arf fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src71.arf
[Sun Jun 17 22:37:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:11 2012] Updating source flux to 1.9e-14
[Sun Jun 17 22:41:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting