[Sat Jun 16 21:00:32 2012] Detection parameters:
  Position = (250.7, 349.8) = 12 10 48.47 39 29 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 244.7 +/- 22.6
  Background counts = 66.0
  Rate = 0.006 +/- 0.0006

[Sat Jun 16 21:00:33 2012] Off-axis axis estimate = 5.09'
[Sat Jun 16 21:06:03 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 21:06:03 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Sat Jun 16 21:06:03 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.952
[Sat Jun 16 21:06:03 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 8.97"
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src57.ximg exists
[Sun Jun 17 02:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src57.csv
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src57_1.ximg exists
[Sun Jun 17 02:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src57.csv
[Sun Jun 17 02:17:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Sun Jun 17 02:17:06 2012] Fit fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Sun Jun 17 06:08:18 2012] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 11.747571 pixels away
[Sun Jun 17 06:08:18 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:18 2012] Assessing source extent using major
[Sun Jun 17 06:08:18 2012] Source does appear to be extended
[Sun Jun 17 06:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 06:08:18 2012] Source is confused with source 55
[Sun Jun 17 06:08:52 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 06:08:52 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Sun Jun 17 06:08:52 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.952
[Sun Jun 17 06:08:52 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 8.97"
[Sun Jun 17 10:00:15 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src48.ximg exists
[Sun Jun 17 10:00:15 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src48_1.ximg exists
[Sun Jun 17 10:00:15 2012] Fit fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src48 appears to have run properly
[Sun Jun 17 10:00:18 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sun Jun 17 10:00:18 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sun Jun 17 10:00:18 2012] Fit fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Sun Jun 17 13:02:56 2012] Warning, spatial fit 48 centroid is now closest to src. 55
[Sun Jun 17 13:02:56 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:02:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:02:56 2012] Assessing source extent using major
[Sun Jun 17 13:02:56 2012] Source does appear to be extended
[Sun Jun 17 13:02:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 13:03:37 2012] XMMSAS src. selection expression = ellipse(21760.742996, 30385.904358, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 17 13:03:37 2012] Writing source region out to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src60_src.reg
[Sun Jun 17 13:03:37 2012] Extracting stamp from image fullrun_pn_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (213, 312) - (288, 387)
[Sun Jun 17 13:03:37 2012] XMMSAS bgd. selection expression = annulus(21760.742996, 30385.904358, 1087.500000, 2175.000000, X, Y) && !ellipse(21445.218320, 28720.878600, 474.388814, 474.388814, 0.000000, X, Y) && !ellipse(20933.111063, 34546.902508, 2963.392085, 482.107777, 67.063842, X, Y) && !ellipse(21488.252000, 33059.900000, 1545.432044, 1545.432044, 0.000000, X, Y) && !ellipse(21522.548974, 33134.066141, 1502.888043, 416.316949, 66.860772, X, Y) && !ellipse(18805.245361, 33091.206635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21688.470000, 32617.768000, 1348.568039, 1348.568039, 0.000000, X, Y) && !ellipse(21942.772080, 32122.418260, 1514.064044, 401.991212, 66.962000, X, Y) && !ellipse(24268.608002, 31550.676331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22278.650000, 31206.074000, 1435.440041, 604.170417, 50.142000, X, Y) && !ellipse(22732.868000, 30095.256000, 1342.680039, 1173.664034, 90.000000, X, Y) && !ellipse(23799.791620, 30470.646520, 461.103213, 461.103213, 0.000000, X, Y) && !ellipse(23074.000000, 29292.606000, 1281.728037, 1281.728037, 0.000000, X, Y) && !ellipse(23217.763800, 29107.874000, 1282.344037, 560.336016, 90.000000, X, Y) && !ellipse(23376.319031, 28751.444427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19076.349075, 28688.493683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23795.865800, 27718.553460, 1892.264054, 480.995214, 68.269000, X, Y) && !ellipse(23975.969200, 27300.314000, 1178.800034, 713.463221, 90.000000, X, Y) && !ellipse(23933.935780, 27401.812614, 1892.264054, 460.723213, 67.526000, X, Y)
[Sun Jun 17 13:03:37 2012] Writing fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src60.gif
[Sun Jun 17 15:05:48 2012] Mean detx,y = (978.96, 7182.49) 
[Sun Jun 17 15:05:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 15:06:11 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 15:06:12 2012] Setting source spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sun Jun 17 15:06:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sun Jun 17 18:16:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 17 18:16:24 2012] rmf not generated due to insufficient counts
[Sun Jun 17 22:37:09 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:09 2012] Error reading totcts from fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sun Jun 17 22:37:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:11 2012] Using photon index=1.80, rate=0.00638, arf fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src60.arf
[Sun Jun 17 22:37:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:11 2012] Updating source flux to 2.3e-14
[Sun Jun 17 22:41:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting