[Sat Jun 16 21:00:32 2012] Detection parameters:
  Position = (279.5, 363.2) = 12 10 37.63 39 30 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.0 +/- 23.4
  Background counts = 66.5
  Rate = 0.008 +/- 0.0007

[Sat Jun 16 21:00:33 2012] Off-axis axis estimate = 4.89'
[Sat Jun 16 21:06:03 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 21:06:03 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Sat Jun 16 21:06:03 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Sat Jun 16 21:06:03 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 8.87"
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src50.ximg exists
[Sun Jun 17 02:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src50.csv
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src50_1.ximg exists
[Sun Jun 17 02:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src50.csv
[Sun Jun 17 02:17:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sun Jun 17 02:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sun Jun 17 02:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sun Jun 17 02:17:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:18 2012] Spatial fit model total counts = 1153.140000, observed total counts = 952.000000
[Sun Jun 17 06:08:18 2012] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 17 06:08:18 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:18 2012] Assessing source extent using major
[Sun Jun 17 06:08:18 2012] Source does appear to be extended
[Sun Jun 17 06:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 06:08:52 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 06:08:52 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Sun Jun 17 06:08:52 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Sun Jun 17 06:08:52 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 8.87"
[Sun Jun 17 10:00:15 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src41.ximg exists
[Sun Jun 17 10:00:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src41.csv
[Sun Jun 17 10:00:15 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src41_1.ximg exists
[Sun Jun 17 10:00:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src41.csv
[Sun Jun 17 10:00:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 10:00:18 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sun Jun 17 10:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sun Jun 17 10:00:18 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sun Jun 17 10:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sun Jun 17 10:00:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 13:02:56 2012] Spatial fit model total counts = 1150.490000, observed total counts = 952.000000
[Sun Jun 17 13:02:56 2012] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 17 13:02:56 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 13.800458 pixels away
[Sun Jun 17 13:02:56 2012] Source 52 is offset by 2.573885 and 1.275820 pixels which is larger than
2 X fitted extent = 1.929140 x 1.929140, not incorporating fit results
[Sun Jun 17 13:02:56 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:02:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:02:56 2012] Assessing source extent using major
[Sun Jun 17 13:02:56 2012] Source does appear to be extended
[Sun Jun 17 13:02:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 13:03:37 2012] XMMSAS src. selection expression = ellipse(24268.608002, 31550.676331, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 17 13:03:37 2012] Writing source region out to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src52_src.reg
[Sun Jun 17 13:03:37 2012] Extracting stamp from image fullrun_pn_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (242, 326) - (317, 401)
[Sun Jun 17 13:03:37 2012] XMMSAS bgd. selection expression = annulus(24268.608002, 31550.676331, 1087.500000, 2175.000000, X, Y) && !ellipse(26772.075400, 29650.521600, 1427.923241, 1427.923241, 0.000000, X, Y) && !ellipse(20717.596000, 34958.236000, 1820.336052, 1820.336052, 0.000000, X, Y) && !ellipse(20933.111063, 34546.902508, 2963.392085, 482.107777, 67.063842, X, Y) && !ellipse(21131.162000, 34148.394000, 1536.464044, 1536.464044, 0.000000, X, Y) && !ellipse(24928.364197, 34143.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25184.274506, 33450.580780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21488.252000, 33059.900000, 1545.432044, 1545.432044, 0.000000, X, Y) && !ellipse(21522.548974, 33134.066141, 1502.888043, 416.316949, 66.860772, X, Y) && !ellipse(25367.054688, 33009.054718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25612.862610, 32487.460938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21688.470000, 32617.768000, 1348.568039, 1348.568039, 0.000000, X, Y) && !ellipse(24841.374817, 32342.278625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21942.772080, 32122.418260, 1514.064044, 401.991212, 66.962000, X, Y) && !ellipse(25841.009277, 31879.942444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26045.685486, 31349.302979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22278.650000, 31206.074000, 1435.440041, 604.170417, 50.142000, X, Y) && !ellipse(27248.113739, 30563.316071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22732.868000, 30095.256000, 1342.680039, 1173.664034, 90.000000, X, Y) && !ellipse(21760.742996, 30385.904358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23799.791620, 30470.646520, 461.103213, 461.103213, 0.000000, X, Y) && !ellipse(25569.546000, 29299.470000, 1363.160039, 1286.000037, 79.523000, X, Y) && !ellipse(23074.000000, 29292.606000, 1281.728037, 1281.728037, 0.000000, X, Y) && !ellipse(23217.763800, 29107.874000, 1282.344037, 560.336016, 90.000000, X, Y) && !ellipse(23376.319031, 28751.444427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23795.865800, 27718.553460, 1892.264054, 480.995214, 68.269000, X, Y)
[Sun Jun 17 13:03:37 2012] Writing fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src52.gif
[Sun Jun 17 14:53:45 2012] Mean detx,y = (-1642.46, 7260.70) 
[Sun Jun 17 14:53:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 14:54:12 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 14:54:12 2012] Setting source spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sun Jun 17 14:54:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sun Jun 17 18:08:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 17 18:08:01 2012] rmf not generated due to insufficient counts
[Sun Jun 17 22:37:09 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:09 2012] Error reading totcts from fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sun Jun 17 22:37:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:11 2012] Using photon index=1.80, rate=0.00828, arf fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src52.arf
[Sun Jun 17 22:37:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:11 2012] Updating source flux to 3.2e-14
[Sun Jun 17 22:41:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting