[Sat Jun 16 21:00:32 2012] Detection parameters:
  Position = (299.9, 360.9) = 12 10 29.96 39 30 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.7 +/- 24.3
  Background counts = 66.6
  Rate = 0.006 +/- 0.0007

[Sat Jun 16 21:00:33 2012] Off-axis axis estimate = 4.53'
[Sat Jun 16 21:06:03 2012] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 21:06:03 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Sat Jun 16 21:06:03 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.001
[Sat Jun 16 21:06:03 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 8.69"
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src49.ximg exists
[Sun Jun 17 02:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src49.csv
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src49_1.ximg exists
[Sun Jun 17 02:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src49.csv
[Sun Jun 17 02:17:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sun Jun 17 02:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src49.csv
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sun Jun 17 02:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src49.csv
[Sun Jun 17 02:17:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:18 2012] Spatial fit model total counts = 2141.950000, observed total counts = 1854.000000
[Sun Jun 17 06:08:18 2012] Poor agreement between spatial fit and data for source 51
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 17 06:08:18 2012] Spatial fit model total counts = 2557.580000, observed total counts = 2167.000000
[Sun Jun 17 06:08:18 2012] Poor agreement between spatial fit and data for source 51
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 17 06:08:18 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:18 2012] Assessing source extent using major
[Sun Jun 17 06:08:18 2012] Source does appear to be extended
[Sun Jun 17 06:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 06:08:18 2012] Source is confused with source 48
[Sun Jun 17 06:08:52 2012] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 06:08:52 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Sun Jun 17 06:08:52 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.001
[Sun Jun 17 06:08:52 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 8.69"
[Sun Jun 17 10:00:15 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src40.ximg exists
[Sun Jun 17 10:00:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src40.csv
[Sun Jun 17 10:00:15 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src40_1.ximg exists
[Sun Jun 17 10:00:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src40.csv
[Sun Jun 17 10:00:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 10:00:18 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Sun Jun 17 10:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src40.csv
[Sun Jun 17 10:00:18 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Sun Jun 17 10:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src40.csv
[Sun Jun 17 10:00:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 13:02:56 2012] Spatial fit model total counts = 2003.430000, observed total counts = 1686.000000
[Sun Jun 17 13:02:56 2012] Poor agreement between spatial fit and data for source 51
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 17 13:02:56 2012] Source 51 is offset by -6.991799 and 3.966425 pixels which is larger than
2 X fitted extent = 1.024593 x 1.024593, not incorporating fit results
[Sun Jun 17 13:02:56 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:02:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:02:56 2012] Assessing source extent using major
[Sun Jun 17 13:02:56 2012] Source does appear to be extended
[Sun Jun 17 13:02:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 13:03:37 2012] XMMSAS src. selection expression = ellipse(26045.685486, 31349.302979, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 17 13:03:37 2012] Writing source region out to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src51_src.reg
[Sun Jun 17 13:03:37 2012] Extracting stamp from image fullrun_pn_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (262, 323) - (337, 398)
[Sun Jun 17 13:03:37 2012] XMMSAS bgd. selection expression = annulus(26045.685486, 31349.302979, 1087.500000, 2175.000000, X, Y) && !ellipse(26772.075400, 29650.521600, 1427.923241, 1427.923241, 0.000000, X, Y) && !ellipse(20933.111063, 34546.902508, 2963.392085, 482.107777, 67.063842, X, Y) && !ellipse(24928.364197, 34143.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25184.274506, 33450.580780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25367.054688, 33009.054718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25612.862610, 32487.460938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24841.374817, 32342.278625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25841.009277, 31879.942444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.608002, 31550.676331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28001.354600, 30953.479400, 361.645610, 361.645610, 0.000000, X, Y) && !ellipse(27248.113739, 30563.316071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22732.868000, 30095.256000, 1342.680039, 1173.664034, 90.000000, X, Y) && !ellipse(23799.791620, 30470.646520, 461.103213, 461.103213, 0.000000, X, Y) && !ellipse(25569.546000, 29299.470000, 1363.160039, 1286.000037, 79.523000, X, Y) && !ellipse(23074.000000, 29292.606000, 1281.728037, 1281.728037, 0.000000, X, Y) && !ellipse(23217.763800, 29107.874000, 1282.344037, 560.336016, 90.000000, X, Y) && !ellipse(23376.319031, 28751.444427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27870.967682, 28943.270294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23795.865800, 27718.553460, 1892.264054, 480.995214, 68.269000, X, Y) && !ellipse(23933.935780, 27401.812614, 1892.264054, 460.723213, 67.526000, X, Y)
[Sun Jun 17 13:03:37 2012] Writing fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src51.gif
[Sun Jun 17 14:52:55 2012] Mean detx,y = (-3220.32, 6352.22) 
[Sun Jun 17 14:52:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 14:53:16 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 14:53:17 2012] Setting source spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sun Jun 17 14:53:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sun Jun 17 18:07:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 17 18:07:49 2012] rmf not generated due to insufficient counts
[Sun Jun 17 22:37:09 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:09 2012] Error reading totcts from fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sun Jun 17 22:37:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:11 2012] Using photon index=1.80, rate=0.00582, arf fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src51.arf
[Sun Jun 17 22:37:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:11 2012] Updating source flux to 2.3e-14
[Sun Jun 17 22:41:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting