[Sat Jun 16 21:00:31 2012] Detection parameters:
  Position = (358.4, 259.7) = 12 10 8.01 39 23 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2185.4 +/- 57.1
  Background counts = 53.6
  Rate = 0.06 +/- 0.002

[Sat Jun 16 21:00:33 2012] Off-axis axis estimate = 5.18'
[Sat Jun 16 21:06:03 2012] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 21:06:03 2012] Initial guess for spatial extent in simple fitting = 9.02"
[Sat Jun 16 21:06:03 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.944
[Sat Jun 16 21:06:03 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.02"
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 17 02:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src3.csv
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 17 02:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src3.csv
[Sun Jun 17 02:17:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 17 02:17:06 2012] Fit fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jun 17 06:08:18 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.856910 pixels away
[Sun Jun 17 06:08:18 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:18 2012] Assessing source extent using major
[Sun Jun 17 06:08:18 2012] Source does appear to be extended
[Sun Jun 17 06:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 06:08:52 2012] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 06:08:52 2012] Initial guess for spatial extent in simple fitting = 9.02"
[Sun Jun 17 06:08:52 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.944
[Sun Jun 17 06:08:52 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.02"
[Sun Jun 17 10:00:14 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 17 10:00:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src3.csv
[Sun Jun 17 10:00:14 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 17 10:00:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src3.csv
[Sun Jun 17 10:00:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 10:00:17 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 17 10:00:17 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 17 10:00:17 2012] Fit fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jun 17 13:02:56 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.205750 pixels away
[Sun Jun 17 13:02:56 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:02:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:02:56 2012] Assessing source extent using major
[Sun Jun 17 13:02:56 2012] Source does appear to be extended
[Sun Jun 17 13:02:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 13:03:34 2012] Counts = 2185.361572, rescaling region sizes by 2.000000
[Sun Jun 17 13:03:34 2012] XMMSAS src. selection expression = ellipse(31134.561554, 22549.479187, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 17 13:03:34 2012] Writing source region out to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 17 13:03:34 2012] Extracting stamp from image fullrun_pn_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (283, 185) - (433, 335)
[Sun Jun 17 13:03:34 2012] XMMSAS bgd. selection expression = annulus(31134.561554, 22549.479187, 4350.000000, 8700.000000, X, Y) && !ellipse(25390.529800, 23899.022800, 1654.906805, 1654.906805, 0.000000, X, Y) && !ellipse(26772.075400, 29650.521600, 1427.923241, 1427.923241, 0.000000, X, Y) && !ellipse(21942.772080, 32122.418260, 1514.064044, 401.991212, 66.962000, X, Y) && !ellipse(25841.009277, 31879.942444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26045.685486, 31349.302979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.608002, 31550.676331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22278.650000, 31206.074000, 1435.440041, 604.170417, 50.142000, X, Y) && !ellipse(30551.132141, 30990.964294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28001.354600, 30953.479400, 361.645610, 361.645610, 0.000000, X, Y) && !ellipse(27248.113739, 30563.316071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22732.868000, 30095.256000, 1342.680039, 1173.664034, 90.000000, X, Y) && !ellipse(21760.742996, 30385.904358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23799.791620, 30470.646520, 461.103213, 461.103213, 0.000000, X, Y) && !ellipse(34642.694244, 30155.046906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25569.546000, 29299.470000, 1363.160039, 1286.000037, 79.523000, X, Y) && !ellipse(23074.000000, 29292.606000, 1281.728037, 1281.728037, 0.000000, X, Y) && !ellipse(23217.763800, 29107.874000, 1282.344037, 560.336016, 90.000000, X, Y) && !ellipse(30289.505400, 29013.550600, 1314.136038, 864.648025, 337.950705, X, Y) && !ellipse(23376.319031, 28751.444427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27870.967682, 28943.270294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23795.865800, 27718.553460, 1892.264054, 480.995214, 68.269000, X, Y) && !ellipse(23975.969200, 27300.314000, 1178.800034, 713.463221, 90.000000, X, Y) && !ellipse(27663.174469, 27535.284363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23933.935780, 27401.812614, 1892.264054, 460.723213, 67.526000, X, Y) && !ellipse(28043.417145, 26656.931641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24343.304000, 26416.294000, 1144.408033, 1144.408033, 0.000000, X, Y) && !ellipse(28209.205139, 26226.269958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24185.516000, 26577.982000, 1124.192032, 1124.192032, 0.000000, X, Y) && !ellipse(28424.169586, 25704.296509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33811.465637, 25474.713470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28681.895935, 25176.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39224.236694, 23786.996307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23288.177368, 22565.820892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21928.941757, 22129.259735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27743.242400, 22630.437800, 373.181611, 373.181611, 0.000000, X, Y) && !ellipse(26002.790833, 22773.494629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25090.700653, 22326.600098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32534.532000, 20910.981000, 454.120813, 454.120813, 0.000000, X, Y) && !ellipse(27858.726878, 20914.461548, 457.556460, 379.175024, 318.264047, X, Y) && !ellipse(28838.417877, 20482.935806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26479.419037, 19181.812149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29808.650543, 18904.315125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22298.594849, 17887.541122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28516.357513, 17504.719086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29094.004272, 16632.118484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33049.859863, 16495.683167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30647.910614, 16331.574478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28013.920000, 15937.276000, 1692.696049, 1692.696049, 0.000000, X, Y) && !ellipse(25082.876282, 15804.957382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26225.088470, 16056.902405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23453.179474, 14052.267670, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 17 13:03:34 2012] Writing fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src3.gif
[Sun Jun 17 13:11:30 2012] Mean detx,y = (-4535.33, -3640.27) 
[Sun Jun 17 13:11:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 13:13:13 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 13:13:13 2012] Setting source spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 17 13:13:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 17 17:20:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 17 17:20:12 2012] rmf not generated due to insufficient counts
[Sun Jun 17 22:37:09 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:09 2012] Error reading totcts from fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 17 22:37:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:10 2012] Using photon index=1.80, rate=0.0586, arf fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src3.arf
[Sun Jun 17 22:37:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:10 2012] Updating source flux to 1.9e-13
[Sun Jun 17 22:41:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting