[Sat Jun 16 21:00:31 2012] Detection parameters:
  Position = (238.3, 405.0) = 12 10 53.14 39 33 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 734.6 +/- 36.3
  Background counts = 44.5
  Rate = 0.01 +/- 0.0006

[Sat Jun 16 21:00:33 2012] Off-axis axis estimate = 8.87'
[Sat Jun 16 21:06:03 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 21:06:03 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Sat Jun 16 21:06:03 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Sat Jun 16 21:06:03 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 10.86"
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src24.ximg exists
[Sun Jun 17 02:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src24.csv
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Jun 17 02:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src24.csv
[Sun Jun 17 02:17:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Jun 17 02:17:06 2012] Fit fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Sun Jun 17 06:08:18 2012] Warning, spatial fit 24 centroid is now closest to src. 22
[Sun Jun 17 06:08:18 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:18 2012] Assessing source extent using major
[Sun Jun 17 06:08:18 2012] Source does appear to be extended
[Sun Jun 17 06:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 06:08:18 2012] Source is confused with source 22
[Sun Jun 17 06:08:18 2012] Source is confused with source 28
[Sun Jun 17 06:08:18 2012] Source is confused with source 31
[Sun Jun 17 06:08:52 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 06:08:52 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Sun Jun 17 06:08:52 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Sun Jun 17 06:08:52 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 10.86"
[Sun Jun 17 10:00:14 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src20.ximg exists
[Sun Jun 17 10:00:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src20.csv
[Sun Jun 17 10:00:15 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Jun 17 10:00:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src20.csv
[Sun Jun 17 10:00:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 10:00:17 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Jun 17 10:00:17 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Jun 17 10:00:17 2012] Fit fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Jun 17 13:02:56 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 13.929202 pixels away
[Sun Jun 17 13:02:56 2012] Warning, spatial fit 20 centroid is now closest to src. 35
[Sun Jun 17 13:02:56 2012] Spatial fit model total counts = 5040.470000, observed total counts = 5039.000000
[Sun Jun 17 13:02:56 2012] Offset between fit and detection position for source 25 = 2.639799 pixels
[Sun Jun 17 13:02:56 2012] Warning, changing simple spatial fit ID from 20 to 24
[Sun Jun 17 13:02:56 2012] 3993.680000 total counts/ 1676.140000 bgd. counts: snr = 56.607255
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.639799 pixels
  Position = (238.7, 402.4) = 12 10 52.99 39 33 33.6
  Extent = 22.8 (22.2-23.0)", rotation angle = 0
  Source counts = 2317.5 +/- 63.2
  Background counts = 1676.1
  Rate = 0.04 +/- 0.001
[Sun Jun 17 13:02:56 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:02:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:02:56 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 13:02:56 2012] Source does appear to be extended
[Sun Jun 17 13:02:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 13:03:35 2012] Counts = 2317.540000, rescaling region sizes by 2.000000
[Sun Jun 17 13:03:35 2012] XMMSAS src. selection expression = ellipse(20717.596000, 34958.236000, 2730.504079, 2730.504079, 0.000000, X, Y)
[Sun Jun 17 13:03:35 2012] Writing source region out to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src25_src.reg
[Sun Jun 17 13:03:35 2012] Extracting stamp from image fullrun_pn_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (82, 245) - (396, 559)
[Sun Jun 17 13:03:35 2012] XMMSAS bgd. selection expression = annulus(20717.596000, 34958.236000, 9101.680262, 18203.360524, X, Y) && !ellipse(25390.529800, 23899.022800, 1654.906805, 1654.906805, 0.000000, X, Y) && !ellipse(21445.218320, 28720.878600, 474.388814, 474.388814, 0.000000, X, Y) && !ellipse(31134.561554, 22549.479187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.075400, 29650.521600, 1427.923241, 1427.923241, 0.000000, X, Y) && !ellipse(32013.867432, 39643.141907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35284.749359, 39766.003387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27486.941589, 39469.587952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36815.389679, 38765.718445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23045.125366, 38489.348480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23350.892860, 37861.842400, 1838.448053, 374.696011, 64.706200, X, Y) && !ellipse(20272.820770, 37535.433624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.378815, 37271.027222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.842926, 37015.515167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19999.930000, 36820.668000, 1484.552043, 766.285622, 90.000000, X, Y) && !ellipse(20097.031400, 36520.224400, 1826.128053, 445.497613, 66.438000, X, Y) && !ellipse(32004.711647, 36548.328767, 594.469802, 263.602511, 22.773188, X, Y) && !ellipse(31283.943540, 36210.954160, 631.271218, 319.722409, 22.729800, X, Y) && !ellipse(23996.618835, 36311.605835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20232.378000, 36130.206000, 1394.024040, 1394.024040, 0.000000, X, Y) && !ellipse(20417.670000, 35687.376000, 1404.296040, 1404.296040, 0.000000, X, Y) && !ellipse(15789.394928, 35057.829315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24396.413147, 35362.939972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20933.111063, 34546.902508, 2963.392085, 482.107777, 67.063842, X, Y) && !ellipse(16452.053070, 34719.459106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21131.162000, 34148.394000, 1536.464044, 1536.464044, 0.000000, X, Y) && !ellipse(24928.364197, 34143.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25184.274506, 33450.580780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21488.252000, 33059.900000, 1545.432044, 1545.432044, 0.000000, X, Y) && !ellipse(21522.548974, 33134.066141, 1502.888043, 416.316949, 66.860772, X, Y) && !ellipse(25367.054688, 33009.054718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18805.245361, 33091.206635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25612.862610, 32487.460938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21688.470000, 32617.768000, 1348.568039, 1348.568039, 0.000000, X, Y) && !ellipse(34633.120000, 32763.061800, 641.509618, 359.850410, 232.849000, X, Y) && !ellipse(36810.807098, 32237.104950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24841.374817, 32342.278625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21942.772080, 32122.418260, 1514.064044, 401.991212, 66.962000, X, Y) && !ellipse(25841.009277, 31879.942444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26045.685486, 31349.302979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.608002, 31550.676331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12550.733109, 31349.210052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22278.650000, 31206.074000, 1435.440041, 604.170417, 50.142000, X, Y) && !ellipse(30551.132141, 30990.964294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28001.354600, 30953.479400, 361.645610, 361.645610, 0.000000, X, Y) && !ellipse(27248.113739, 30563.316071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22732.868000, 30095.256000, 1342.680039, 1173.664034, 90.000000, X, Y) && !ellipse(21760.742996, 30385.904358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23799.791620, 30470.646520, 461.103213, 461.103213, 0.000000, X, Y) && !ellipse(34642.694244, 30155.046906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25569.546000, 29299.470000, 1363.160039, 1286.000037, 79.523000, X, Y) && !ellipse(23074.000000, 29292.606000, 1281.728037, 1281.728037, 0.000000, X, Y) && !ellipse(23217.763800, 29107.874000, 1282.344037, 560.336016, 90.000000, X, Y) && !ellipse(30289.505400, 29013.550600, 1314.136038, 864.648025, 337.950705, X, Y) && !ellipse(23376.319031, 28751.444427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15573.761414, 28792.873505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19076.349075, 28688.493683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27870.967682, 28943.270294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15342.318527, 27986.060547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13220.213000, 28306.640280, 623.084818, 623.084818, 0.000000, X, Y) && !ellipse(23795.865800, 27718.553460, 1892.264054, 480.995214, 68.269000, X, Y) && !ellipse(23975.969200, 27300.314000, 1178.800034, 713.463221, 90.000000, X, Y) && !ellipse(27663.174469, 27535.284363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23933.935780, 27401.812614, 1892.264054, 460.723213, 67.526000, X, Y) && !ellipse(28043.417145, 26656.931641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24343.304000, 26416.294000, 1144.408033, 1144.408033, 0.000000, X, Y) && !ellipse(28209.205139, 26226.269958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24185.516000, 26577.982000, 1124.192032, 1124.192032, 0.000000, X, Y) && !ellipse(28424.169586, 25704.296509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33811.465637, 25474.713470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28681.895935, 25176.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12223.155594, 24990.444092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15888.868256, 24093.888489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21440.157501, 23951.666534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14872.391617, 24121.219360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39224.236694, 23786.996307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23288.177368, 22565.820892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21928.941757, 22129.259735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27743.242400, 22630.437800, 373.181611, 373.181611, 0.000000, X, Y) && !ellipse(26002.790833, 22773.494629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25090.700653, 22326.600098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32534.532000, 20910.981000, 454.120813, 454.120813, 0.000000, X, Y) && !ellipse(27858.726878, 20914.461548, 457.556460, 379.175024, 318.264047, X, Y) && !ellipse(28838.417877, 20482.935806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13628.324539, 19417.825668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12926.415771, 19443.329880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26479.419037, 19181.812149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29808.650543, 18904.315125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22298.594849, 17887.541122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28516.357513, 17504.719086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29094.004272, 16632.118484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17821.821182, 16486.847229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33049.859863, 16495.683167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30647.910614, 16331.574478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28013.920000, 15937.276000, 1692.696049, 1692.696049, 0.000000, X, Y) && !ellipse(26225.088470, 16056.902405, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 17 13:03:35 2012] Writing fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src25.gif
[Sun Jun 17 13:51:36 2012] Mean detx,y = (272.06, 11725.29) 
[Sun Jun 17 13:51:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 13:59:04 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 13:59:05 2012] Setting source spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Jun 17 13:59:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Jun 17 22:37:09 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:09 2012] Error reading totcts from fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Jun 17 22:37:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:10 2012] Using photon index=1.80, rate=0.0407, arf fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src25.arf
[Sun Jun 17 22:37:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:10 2012] Updating source flux to 1.7e-13
[Sun Jun 17 22:41:32 2012] Flag c found in src. 25 procflags, skipping spectral fitting