[Sat Jun 16 21:00:31 2012] Detection parameters:
  Position = (247.2, 330.8) = 12 10 49.77 39 28 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5867.5 +/- 93.6
  Background counts = 70.1
  Rate = 0.1 +/- 0.002

[Sat Jun 16 21:00:33 2012] Off-axis axis estimate = 4.39'
[Sat Jun 16 21:06:03 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 21:06:03 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Sat Jun 16 21:06:03 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.014
[Sat Jun 16 21:06:03 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.63"
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun 17 02:17:05 2012] Fit fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src2 appears to have run properly
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun 17 02:17:06 2012] Fit fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jun 17 06:08:18 2012] Spatial fit model total counts = 5928.930000, observed total counts = 5929.000000
[Sun Jun 17 06:08:18 2012] Offset between fit and detection position for source 2 = 0.209376 pixels
[Sun Jun 17 06:08:18 2012] 5950.180000 total counts/ 1720.220000 bgd. counts: snr = 101.986870
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.209376 pixels
  Position = (247.1, 330.7) = 12 10 49.82 39 28 21.8
  Extent = 6.2 (6.0-6.4)" x 5.6 (5.4-5.8)", rotation angle = 326 (310-340) degrees
  Source counts = 4230.0 +/- 77.1
  Background counts = 1720.2
  Rate = 0.07 +/- 0.001
[Sun Jun 17 06:08:18 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:18 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 06:08:18 2012] Source does appear to be extended
[Sun Jun 17 06:08:18 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Sun Jun 17 06:08:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 17 06:08:52 2012] Initial guess for spatial extent in simple fitting = 5.90"
[Sun Jun 17 06:08:52 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.160
[Sun Jun 17 06:08:52 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.90"
[Sun Jun 17 10:00:14 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun 17 10:00:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src2.csv
[Sun Jun 17 10:00:14 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun 17 10:00:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src2.csv
[Sun Jun 17 10:00:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 10:00:17 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun 17 10:00:17 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun 17 10:00:17 2012] Fit fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Jun 17 13:02:56 2012] Spatial fit model total counts = 5918.200000, observed total counts = 5929.000000
[Sun Jun 17 13:02:56 2012] Offset between fit and detection position for source 2 = 0.004323 pixels
[Sun Jun 17 13:02:56 2012] 5939.340000 total counts/ 1709.930000 bgd. counts: snr = 102.279977
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.004323 pixels
  Position = (247.1, 330.7) = 12 10 49.82 39 28 21.8
  Extent = 5.9 (5.7-6.1)", rotation angle = 0
  Source counts = 4229.4 +/- 77.1
  Background counts = 1709.9
  Rate = 0.07 +/- 0.001
[Sun Jun 17 13:02:56 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:02:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:02:56 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 13:02:56 2012] Source does appear to be extended
[Sun Jun 17 13:02:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 13:03:34 2012] Counts = 4229.410000, rescaling region sizes by 2.000000
[Sun Jun 17 13:03:34 2012] XMMSAS src. selection expression = ellipse(21445.218320, 28720.878600, 711.583220, 711.583220, 0.000000, X, Y)
[Sun Jun 17 13:03:34 2012] Writing source region out to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun 17 13:03:34 2012] Extracting stamp from image fullrun_pn_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (206, 290) - (288, 372)
[Sun Jun 17 13:03:34 2012] XMMSAS bgd. selection expression = annulus(21445.218320, 28720.878600, 2371.944068, 4743.888137, X, Y) && !ellipse(25390.529800, 23899.022800, 1654.906805, 1654.906805, 0.000000, X, Y) && !ellipse(26772.075400, 29650.521600, 1427.923241, 1427.923241, 0.000000, X, Y) && !ellipse(20717.596000, 34958.236000, 1820.336052, 1820.336052, 0.000000, X, Y) && !ellipse(20933.111063, 34546.902508, 2963.392085, 482.107777, 67.063842, X, Y) && !ellipse(21131.162000, 34148.394000, 1536.464044, 1536.464044, 0.000000, X, Y) && !ellipse(24928.364197, 34143.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25184.274506, 33450.580780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21488.252000, 33059.900000, 1545.432044, 1545.432044, 0.000000, X, Y) && !ellipse(21522.548974, 33134.066141, 1502.888043, 416.316949, 66.860772, X, Y) && !ellipse(25367.054688, 33009.054718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18805.245361, 33091.206635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25612.862610, 32487.460938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21688.470000, 32617.768000, 1348.568039, 1348.568039, 0.000000, X, Y) && !ellipse(24841.374817, 32342.278625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21942.772080, 32122.418260, 1514.064044, 401.991212, 66.962000, X, Y) && !ellipse(25841.009277, 31879.942444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26045.685486, 31349.302979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.608002, 31550.676331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22278.650000, 31206.074000, 1435.440041, 604.170417, 50.142000, X, Y) && !ellipse(22732.868000, 30095.256000, 1342.680039, 1173.664034, 90.000000, X, Y) && !ellipse(21760.742996, 30385.904358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23799.791620, 30470.646520, 461.103213, 461.103213, 0.000000, X, Y) && !ellipse(25569.546000, 29299.470000, 1363.160039, 1286.000037, 79.523000, X, Y) && !ellipse(23074.000000, 29292.606000, 1281.728037, 1281.728037, 0.000000, X, Y) && !ellipse(23217.763800, 29107.874000, 1282.344037, 560.336016, 90.000000, X, Y) && !ellipse(23376.319031, 28751.444427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19076.349075, 28688.493683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23795.865800, 27718.553460, 1892.264054, 480.995214, 68.269000, X, Y) && !ellipse(23975.969200, 27300.314000, 1178.800034, 713.463221, 90.000000, X, Y) && !ellipse(23933.935780, 27401.812614, 1892.264054, 460.723213, 67.526000, X, Y) && !ellipse(24343.304000, 26416.294000, 1144.408033, 1144.408033, 0.000000, X, Y) && !ellipse(24185.516000, 26577.982000, 1124.192032, 1124.192032, 0.000000, X, Y) && !ellipse(15888.868256, 24093.888489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21440.157501, 23951.666534, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 17 13:03:34 2012] Writing fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src2.gif
[Sun Jun 17 13:10:03 2012] Mean detx,y = (1973.20, 5780.57) 
[Sun Jun 17 13:10:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 13:10:54 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 13:10:54 2012] Setting source spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 17 13:10:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 17 22:37:09 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:09 2012] Error reading totcts from fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 17 22:37:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:10 2012] Using photon index=1.80, rate=0.0742, arf fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src2.arf
[Sun Jun 17 22:37:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:10 2012] Updating source flux to 2.5e-13