[Sat Jun 16 21:00:31 2012] Detection parameters:
  Position = (269.4, 435.0) = 12 10 41.43 39 35 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 310.9 +/- 24.1
  Background counts = 42.8
  Rate = 0.005 +/- 0.0004

[Sat Jun 16 21:00:33 2012] Off-axis axis estimate = 10.12'
[Sat Jun 16 21:06:03 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 21:06:03 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Sat Jun 16 21:06:03 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.064
[Sat Jun 16 21:06:03 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.49"
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jun 17 02:17:05 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jun 17 02:17:05 2012] Fit fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_src10 appears to have run properly
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jun 17 02:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jun 17 02:17:06 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jun 17 02:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jun 17 02:17:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:18 2012] Spatial fit model total counts = 1221.190000, observed total counts = 1111.000000
[Sun Jun 17 06:08:18 2012] Offset between fit and detection position for source 10 = 0.873425 pixels
[Sun Jun 17 06:08:18 2012] 1224.989000 total counts/ 692.937000 bgd. counts: snr = 20.211903
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.873425 pixels
  Position = (269.0, 435.8) = 12 10 41.61 39 35 58.9
  Extent = 23.0 (22.9-46.0)" x 4.7 (4.1-5.4)", rotation angle = 65 (63-66) degrees
  Source counts = 532.1 +/- 35.0
  Background counts = 692.9
  Rate = 0.009 +/- 0.0006
[Sun Jun 17 06:08:18 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:18 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 06:08:18 2012] Source does appear to be extended
[Sun Jun 17 06:08:18 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.26
[Sun Jun 17 06:08:18 2012] Source is asymmetric
[Sun Jun 17 06:08:18 2012] Source is confused with source 9
[Sun Jun 17 06:08:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 17 06:08:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 17 06:08:52 2012] Initial guess for spatial extent in simple fitting = 13.83"
[Sun Jun 17 06:08:52 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.034
[Sun Jun 17 06:08:52 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.83"
[Sun Jun 17 10:00:14 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jun 17 10:00:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src10.csv
[Sun Jun 17 10:00:14 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jun 17 10:00:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src10.csv
[Sun Jun 17 10:00:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 10:00:17 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jun 17 10:00:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jun 17 10:00:17 2012] fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jun 17 10:00:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jun 17 10:00:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 13:02:56 2012] Spatial fit model total counts = 1562.510000, observed total counts = 1407.000000
[Sun Jun 17 13:02:56 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 17 13:02:56 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:02:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:02:56 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 13:02:56 2012] Source does appear to be extended
[Sun Jun 17 13:02:56 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.26
[Sun Jun 17 13:02:56 2012] Source is asymmetric
[Sun Jun 17 13:03:34 2012] XMMSAS src. selection expression = ellipse(23350.892860, 37861.842400, 1378.836040, 281.022008, 64.706200, X, Y)
[Sun Jun 17 13:03:34 2012] Writing source region out to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun 17 13:03:34 2012] Extracting stamp from image fullrun_pn_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (190, 357) - (348, 515)
[Sun Jun 17 13:03:34 2012] XMMSAS bgd. selection expression = annulus(23350.892860, 37861.842400, 2298.060066, 4596.120132, X, Y) && !ellipse(27486.941589, 39469.587952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23045.125366, 38489.348480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20272.820770, 37535.433624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.378815, 37271.027222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.842926, 37015.515167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19999.930000, 36820.668000, 1484.552043, 766.285622, 90.000000, X, Y) && !ellipse(20097.031400, 36520.224400, 1826.128053, 445.497613, 66.438000, X, Y) && !ellipse(23996.618835, 36311.605835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20232.378000, 36130.206000, 1394.024040, 1394.024040, 0.000000, X, Y) && !ellipse(20417.670000, 35687.376000, 1404.296040, 1404.296040, 0.000000, X, Y) && !ellipse(20717.596000, 34958.236000, 1820.336052, 1820.336052, 0.000000, X, Y) && !ellipse(24396.413147, 35362.939972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20933.111063, 34546.902508, 2963.392085, 482.107777, 67.063842, X, Y) && !ellipse(21131.162000, 34148.394000, 1536.464044, 1536.464044, 0.000000, X, Y) && !ellipse(24928.364197, 34143.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25184.274506, 33450.580780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21488.252000, 33059.900000, 1545.432044, 1545.432044, 0.000000, X, Y) && !ellipse(21522.548974, 33134.066141, 1502.888043, 416.316949, 66.860772, X, Y) && !ellipse(25367.054688, 33009.054718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18805.245361, 33091.206635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25612.862610, 32487.460938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21688.470000, 32617.768000, 1348.568039, 1348.568039, 0.000000, X, Y) && !ellipse(21942.772080, 32122.418260, 1514.064044, 401.991212, 66.962000, X, Y)
[Sun Jun 17 13:03:34 2012] Writing fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src10.gif
[Sun Jun 17 13:23:28 2012] Mean detx,y = (-3283.20, 13456.29) 
[Sun Jun 17 13:23:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 13:24:01 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 13:24:02 2012] Setting source spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 17 13:24:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun 17 22:37:09 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:09 2012] Error reading totcts from fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 17 22:37:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:10 2012] Using photon index=1.80, rate=0.00934, arf fullrun_pn_xmm0112830201_pi300-10000_pass1_cl_src10.arf
[Sun Jun 17 22:37:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:10 2012] Updating source flux to 6.1e-14
[Sun Jun 17 22:41:32 2012] Flag p found in src. 10 procflags, skipping spectral fitting
[Sun Jun 17 22:41:32 2012] Flag c found in src. 10 procflags, skipping spectral fitting