[Sat Jun 16 21:01:55 2012] Detection parameters:
  Position = (334.7, 191.4) = 12 10 16.95 39 18 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.9 +/- 17.6
  Background counts = 16.4
  Rate = 0.005 +/- 0.0005

[Sat Jun 16 21:01:55 2012] Off-axis axis estimate = 8.20'
[Sun Jun 17 04:13:59 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 04:13:59 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Sun Jun 17 04:13:59 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.056
[Sun Jun 17 04:13:59 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.53"
[Sun Jun 17 06:08:00 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jun 17 06:08:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src10.csv
[Sun Jun 17 06:08:00 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jun 17 06:08:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src10.csv
[Sun Jun 17 06:08:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:00 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jun 17 06:08:00 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jun 17 06:08:00 2012] Fit fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Jun 17 06:08:35 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 12.979669 pixels away
[Sun Jun 17 06:08:35 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:35 2012] Assessing source extent using major
[Sun Jun 17 06:08:35 2012] Source does appear to be extended
[Sun Jun 17 06:08:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 11:30:52 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 11:30:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 17 11:30:52 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Sun Jun 17 11:30:52 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.056
[Sun Jun 17 11:30:52 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 10.53"
[Sun Jun 17 13:02:34 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jun 17 13:02:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src10.csv
[Sun Jun 17 13:02:34 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jun 17 13:02:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src10.csv
[Sun Jun 17 13:02:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 13:02:35 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jun 17 13:02:35 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jun 17 13:02:35 2012] Fit fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Jun 17 13:03:14 2012] Spatial fit model total counts = 374.710000, observed total counts = 366.000000
[Sun Jun 17 13:03:14 2012] Offset between fit and detection position for source 74 = 0.099535 pixels
[Sun Jun 17 13:03:14 2012] 369.240000 total counts/ 242.289000 bgd. counts: snr = 8.155851
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 0.099535 pixels
  Position = (334.7, 191.4) = 12 10 16.93 39 18 16.1
  Extent = 5.1 (4.0-6.2)", rotation angle = 0
  Source counts = 127.0 +/- 19.2
  Background counts = 242.3
  Rate = 0.002 +/- 0.0003
[Sun Jun 17 13:03:14 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:03:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:03:14 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 13:03:14 2012] Source does appear to be extended
[Sun Jun 17 13:03:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 21:05:35 2012] XMMSAS src. selection expression = ellipse(29070.581400, 16607.287200, 303.191409, 303.191409, 0.000000, X, Y)
[Sun Jun 17 21:05:35 2012] Writing source region out to fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src74_src.reg
[Sun Jun 17 21:05:35 2012] Extracting stamp from image fullrun_mos2_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (317, 174) - (352, 209)
[Sun Jun 17 21:05:35 2012] XMMSAS bgd. selection expression = annulus(29070.581400, 16607.287200, 505.319015, 1010.638029, X, Y) && !ellipse(28521.683502, 17612.500000, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 17 21:05:35 2012] Writing fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src74.gif
[Sun Jun 17 21:13:07 2012] Mean detx,y = (588.65, 8181.06) 
[Sun Jun 17 21:13:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 21:13:17 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 21:13:17 2012] Setting source spectrum file to fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Sun Jun 17 21:13:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Sun Jun 17 22:37:13 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:13 2012] Error reading totcts from fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Sun Jun 17 22:37:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:14 2012] Using photon index=1.80, rate=0.00214, arf fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src74.arf
[Sun Jun 17 22:37:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:14 2012] Updating source flux to 4.8e-14