[Sat Jun 16 21:01:54 2012] Detection parameters:
  Position = (182.8, 277.8) = 12 11 13.91 39 24 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.5 +/- 14.7
  Background counts = 15.3
  Rate = 0.003 +/- 0.0004

[Sat Jun 16 21:01:55 2012] Off-axis axis estimate = 8.51'
[Sun Jun 17 04:13:59 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 04:13:59 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Sun Jun 17 04:13:59 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.030
[Sun Jun 17 04:13:59 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 10.69"
[Sun Jun 17 06:08:00 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src20.ximg exists
[Sun Jun 17 06:08:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src20.csv
[Sun Jun 17 06:08:00 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun Jun 17 06:08:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src20.csv
[Sun Jun 17 06:08:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:00 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun Jun 17 06:08:00 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Jun 17 06:08:00 2012] Fit fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Jun 17 06:08:35 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 14.893984 pixels away
[Sun Jun 17 06:08:35 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 10.432309 pixels away
[Sun Jun 17 06:08:35 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:35 2012] Assessing source extent using major
[Sun Jun 17 06:08:35 2012] Source does appear to be extended
[Sun Jun 17 06:08:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 11:30:52 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 11:30:52 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Sun Jun 17 11:30:52 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.030
[Sun Jun 17 11:30:52 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 10.69"
[Sun Jun 17 13:02:34 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src20.ximg exists
[Sun Jun 17 13:02:34 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Jun 17 13:02:34 2012] Fit fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src20 appears to have run properly
[Sun Jun 17 13:02:35 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Jun 17 13:02:35 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Jun 17 13:02:35 2012] Fit fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Jun 17 13:03:14 2012] Source 50 is offset by -9.450689 and -2.221529 pixels which is larger than
2 X fitted extent = 1.262212 x 1.262212, not incorporating fit results
[Sun Jun 17 13:03:14 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:03:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:03:14 2012] Assessing source extent using major
[Sun Jun 17 13:03:14 2012] Source does appear to be extended
[Sun Jun 17 13:03:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 21:05:35 2012] XMMSAS src. selection expression = ellipse(15858.034073, 24118.439545, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 17 21:05:35 2012] Writing source region out to fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src50_src.reg
[Sun Jun 17 21:05:35 2012] Extracting stamp from image fullrun_mos2_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (145, 240) - (220, 315)
[Sun Jun 17 21:05:35 2012] XMMSAS bgd. selection expression = annulus(15858.034073, 24118.439545, 1087.500000, 2175.000000, X, Y) && !ellipse(14892.240616, 24070.125977, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 17 21:05:35 2012] Writing fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src50.gif
[Sun Jun 17 21:15:39 2012] Mean detx,y = (-8813.10, -3766.48) 
[Sun Jun 17 21:15:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 21:15:46 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 21:15:46 2012] Setting source spectrum file to fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sun Jun 17 21:15:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sun Jun 17 22:06:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 17 22:06:44 2012] rmf not generated due to insufficient counts
[Sun Jun 17 22:37:13 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:13 2012] Error reading totcts from fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sun Jun 17 22:37:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:14 2012] Using photon index=1.80, rate=0.00307, arf fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src50.arf
[Sun Jun 17 22:37:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:14 2012] Updating source flux to 4.8e-14
[Sun Jun 17 22:38:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting