[Sat Jun 16 21:01:54 2012] Detection parameters:
  Position = (262.5, 340.8) = 12 10 44.03 39 29 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.7 +/- 11.5
  Background counts = 25.7
  Rate = 0.001 +/- 0.0002

[Sat Jun 16 21:01:55 2012] Off-axis axis estimate = 4.03'
[Sun Jun 17 04:13:59 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 04:13:59 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Sun Jun 17 04:13:59 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.881
[Sun Jun 17 04:13:59 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 8.44"
[Sun Jun 17 06:08:00 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src63.ximg exists
[Sun Jun 17 06:08:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src63.csv
[Sun Jun 17 06:08:00 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src63_1.ximg exists
[Sun Jun 17 06:08:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src63.csv
[Sun Jun 17 06:08:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:01 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sun Jun 17 06:08:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sun Jun 17 06:08:01 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sun Jun 17 06:08:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sun Jun 17 06:08:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:35 2012] Warning, spatial fit 63 centroid is now closest to src. 4
[Sun Jun 17 06:08:35 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:35 2012] Assessing source extent using major
[Sun Jun 17 06:08:35 2012] Source does appear to be extended
[Sun Jun 17 06:08:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 06:08:35 2012] Deleting source due to low Poisson probability 0.9