[Sat Jun 16 21:01:54 2012] Detection parameters:
  Position = (292.2, 275.2) = 12 10 32.86 39 24 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97738.3 +/- 363.4
  Background counts = 27.8
  Rate = 2 +/- 0.006

[Sat Jun 16 21:01:55 2012] Off-axis axis estimate = 1.75'
[Sun Jun 17 04:13:59 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 04:13:59 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Jun 17 04:13:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sun Jun 17 04:13:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sun Jun 17 06:07:59 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 17 06:07:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src1.csv
[Sun Jun 17 06:07:59 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 17 06:07:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src1.csv
[Sun Jun 17 06:07:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:00 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 17 06:08:00 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 17 06:08:00 2012] Fit fullrun_mos2_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 17 06:08:35 2012] Spatial fit model total counts = 92102.500000, observed total counts = 90460.000000
[Sun Jun 17 06:08:35 2012] Offset between fit and detection position for source 1 = 0.165407 pixels
[Sun Jun 17 06:08:35 2012] 92457.900000 total counts/ 19697.700000 bgd. counts: snr = 518.425225
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.165407 pixels
  Position = (292.3, 275.3) = 12 10 32.83 39 24 21.0
  Extent = 6.4 (6.4-6.4)", rotation angle = 0
  Source counts = 72760.2 +/- 304.1
  Background counts = 19697.7
  Rate = 1 +/- 0.005
[Sun Jun 17 06:08:35 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:35 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 06:08:35 2012] Source does appear to be extended
[Sun Jun 17 06:08:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 11:30:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 17 11:30:52 2012] Initial guess for spatial extent in simple fitting = 6.39"
[Sun Jun 17 11:30:52 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.032
[Sun Jun 17 11:30:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.39"
[Sun Jun 17 13:02:34 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 17 13:02:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src1.csv
[Sun Jun 17 13:02:34 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 17 13:02:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src1.csv
[Sun Jun 17 13:02:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 13:02:34 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 17 13:02:34 2012] fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 17 13:02:34 2012] Fit fullrun_mos2_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 17 13:03:14 2012] Spatial fit model total counts = 92121.300000, observed total counts = 90460.000000
[Sun Jun 17 13:03:14 2012] Offset between fit and detection position for source 1 = 0.000500 pixels
[Sun Jun 17 13:03:14 2012] 92479.900000 total counts/ 19702.000000 bgd. counts: snr = 518.494749
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000500 pixels
  Position = (292.3, 275.3) = 12 10 32.83 39 24 21.0
  Extent = 6.4 (6.4-6.4)", rotation angle = 0
  Source counts = 72777.9 +/- 304.1
  Background counts = 19702.0
  Rate = 1 +/- 0.005
[Sun Jun 17 13:03:14 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:03:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:03:14 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 13:03:14 2012] Source does appear to be extended
[Sun Jun 17 13:03:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 21:05:35 2012] Counts = 72777.900000, rescaling region sizes by 3.000000
[Sun Jun 17 21:05:35 2012] XMMSAS src. selection expression = ellipse(25379.271400, 23903.708600, 1150.686033, 1150.686033, 0.000000, X, Y)
[Sun Jun 17 21:05:35 2012] Writing source region out to fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 17 21:05:35 2012] Extracting stamp from image fullrun_mos2_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (226, 209) - (358, 341)
[Sun Jun 17 21:05:35 2012] XMMSAS bgd. selection expression = annulus(25379.271400, 23903.708600, 5753.430166, 11506.860331, X, Y) && !ellipse(26766.520700, 29654.687400, 1447.171242, 1231.833635, 7.363153, X, Y) && !ellipse(21439.022140, 28726.512400, 430.001612, 372.901611, 322.668289, X, Y) && !ellipse(31131.540400, 22531.621600, 471.252814, 365.888011, 322.534991, X, Y) && !ellipse(26214.969880, 16049.165200, 419.563212, 419.563212, 0.000000, X, Y) && !ellipse(24485.646027, 24122.209686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27863.002000, 20917.024600, 359.886289, 359.886289, 0.000000, X, Y) && !ellipse(27732.888000, 22613.615400, 318.476009, 318.476009, 0.000000, X, Y) && !ellipse(24431.512634, 23694.258789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29070.581400, 16607.287200, 404.255212, 404.255212, 0.000000, X, Y) && !ellipse(21911.837000, 22109.819600, 348.515210, 348.515210, 0.000000, X, Y) && !ellipse(33310.127200, 26238.752400, 350.383210, 350.383210, 0.000000, X, Y) && !ellipse(30646.060800, 31025.942000, 725.965621, 725.965621, 0.000000, X, Y) && !ellipse(32531.414948, 20896.295990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34644.688171, 32750.938080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24178.434000, 31570.927400, 431.429612, 431.429612, 0.000000, X, Y) && !ellipse(28013.854800, 30967.569200, 265.773608, 265.773608, 0.000000, X, Y) && !ellipse(15858.034073, 24118.439545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14892.240616, 24070.125977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.328928, 15795.547813, 472.158766, 271.426281, 357.805781, X, Y) && !ellipse(22076.183800, 31156.476000, 389.480011, 389.480011, 0.000000, X, Y) && !ellipse(23882.145900, 28052.055600, 375.208755, 375.208755, 0.000000, X, Y) && !ellipse(22306.111237, 17909.680084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21417.480600, 23979.900400, 376.345611, 376.345611, 0.000000, X, Y) && !ellipse(15767.218000, 34825.945800, 1889.000054, 1889.000054, 0.000000, X, Y) && !ellipse(20914.196198, 32040.709778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25122.468079, 22450.396149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27701.836000, 23283.792000, 1213.704035, 1213.704035, 0.000000, X, Y) && !ellipse(28477.580811, 23065.964691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21707.719406, 30380.588989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16938.709000, 32074.553600, 1479.698043, 1479.698043, 0.000000, X, Y) && !ellipse(23183.999000, 22239.499600, 1293.688037, 359.837610, 318.128000, X, Y) && !ellipse(16450.173309, 34689.523651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28521.683502, 17612.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23236.522000, 25262.238000, 1233.216035, 1233.216035, 0.000000, X, Y) && !ellipse(36876.963600, 12325.774000, 1959.072056, 1285.664037, 307.892000, X, Y)
[Sun Jun 17 21:05:35 2012] Writing fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src1.gif
[Sun Jun 17 21:05:48 2012] Mean detx,y = (-53.11, 29.36) 
[Sun Jun 17 21:05:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 21:08:40 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 21:08:40 2012] Setting source spectrum file to fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 17 21:08:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 17 22:37:13 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:13 2012] Error reading totcts from fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 17 22:37:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:14 2012] Using photon index=1.80, rate=1.23, arf fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src1.arf
[Sun Jun 17 22:37:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:14 2012] Updating source flux to 1.3e-11
[Sun Jun 17 22:41:32 2012] Reading fit data from xmm0112830201/analysis//spectral/fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun 17 22:41:32 2012] Spectral fit parameter nH value = 425730000000.0
[Sun Jun 17 22:41:32 2012] Spectral fit parameter PhoIndex value = 0.0441391
[Sun Jun 17 22:41:32 2012] Failed to get F(0.3-8.0) from xmm0112830201/analysis//spectral/fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun 17 22:41:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:41:32 2012] Using Nh = 4.3e+11, photon index=0.04, rate=1.23, arf fullrun_mos2_xmm0112830201_pi300-10000_pass1_cl_src1.arf
[Sun Jun 17 22:41:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:41:32 2012] Updating source flux to 3.1e-11