[Sat Jun 16 21:01:13 2012] Detection parameters:
  Position = (141.0, 287.0) = 12 11 29.63 39 25 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.9 +/- 16.7
  Background counts = 12.0
  Rate = 0.003 +/- 0.0003

[Sat Jun 16 21:01:14 2012] Off-axis axis estimate = 11.45'
[Sun Jun 17 02:17:07 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 02:17:07 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Sun Jun 17 02:17:07 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.830
[Sun Jun 17 02:17:07 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 12.15"
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src24.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src24.csv
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src24.csv
[Sun Jun 17 04:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Jun 17 04:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Jun 17 04:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Jun 17 04:13:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:26 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 15.109204 pixels away
[Sun Jun 17 06:08:26 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:26 2012] Assessing source extent using major
[Sun Jun 17 06:08:26 2012] Source does appear to be extended
[Sun Jun 17 06:08:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 10:00:19 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 10:00:19 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Sun Jun 17 10:00:19 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.830
[Sun Jun 17 10:00:19 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 12.15"
[Sun Jun 17 11:30:51 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src23.ximg exists
[Sun Jun 17 11:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src23.csv
[Sun Jun 17 11:30:51 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Jun 17 11:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src23.csv
[Sun Jun 17 11:30:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 11:30:52 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Jun 17 11:30:52 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Jun 17 11:30:52 2012] Fit fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Jun 17 13:03:05 2012] Spatial fit model total counts = 272.000000, observed total counts = 272.000000
[Sun Jun 17 13:03:05 2012] Offset between fit and detection position for source 8 = 0.126043 pixels
[Sun Jun 17 13:03:05 2012] 275.752000 total counts/ 171.744000 bgd. counts: snr = 7.936444
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.126043 pixels
  Position = (140.9, 286.9) = 12 11 29.68 39 25 10.6
  Extent = 6.2 (5.2-7.6)", rotation angle = 0
  Source counts = 104.0 +/- 16.6
  Background counts = 171.7
  Rate = 0.002 +/- 0.0003
[Sun Jun 17 13:03:05 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:03:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:03:05 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 13:03:05 2012] Source does appear to be extended
[Sun Jun 17 13:03:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 19:46:13 2012] XMMSAS src. selection expression = ellipse(12205.536400, 24914.354600, 371.265611, 371.265611, 0.000000, X, Y)
[Sun Jun 17 19:46:13 2012] Writing source region out to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src8_src.reg
[Sun Jun 17 19:46:13 2012] Extracting stamp from image fullrun_mos1_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (120, 266) - (162, 308)
[Sun Jun 17 19:46:13 2012] XMMSAS bgd. selection expression = annulus(12205.536400, 24914.354600, 618.776018, 1237.552036, X, Y) && !ellipse(10442.988983, 23550.828796, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 17 19:46:13 2012] Writing fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src8.gif
[Sun Jun 17 19:58:47 2012] Mean detx,y = (-5728.30, 11677.49) 
[Sun Jun 17 19:58:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 19:58:56 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 19:58:57 2012] Setting source spectrum file to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jun 17 19:58:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Jun 17 22:37:12 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:12 2012] Error reading totcts from fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jun 17 22:37:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:13 2012] Using photon index=1.80, rate=0.00175, arf fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src8.arf
[Sun Jun 17 22:37:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:13 2012] Updating source flux to 4.5e-14