[Sat Jun 16 21:01:13 2012] Detection parameters:
  Position = (265.5, 255.0) = 12 10 42.86 39 22 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.5 +/- 14.3
  Background counts = 23.3
  Rate = 0.002 +/- 0.0003

[Sat Jun 16 21:01:14 2012] Off-axis axis estimate = 3.95'
[Sun Jun 17 02:17:07 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 02:17:07 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Sun Jun 17 02:17:07 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.845
[Sun Jun 17 02:17:07 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 8.40"
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src42.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src42.csv
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src42.csv
[Sun Jun 17 04:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun Jun 17 04:13:59 2012] Fit fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Sun Jun 17 06:08:26 2012] Warning, spatial fit 42 centroid is now closest to src. 57
[Sun Jun 17 06:08:26 2012] Spatial fit model total counts = 715.333000, observed total counts = 713.000000
[Sun Jun 17 06:08:26 2012] Offset between fit and detection position for source 55 = 0.205790 pixels
[Sun Jun 17 06:08:26 2012] Warning, changing simple spatial fit ID from 42 to 63
[Sun Jun 17 06:08:26 2012] 733.407400 total counts/ 690.730000 bgd. counts: snr = 1.623842
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.205790 pixels
  Position = (265.5, 254.8) = 12 10 42.89 39 22 51.7
  Extent = 3.1 (2.4-4.0)", rotation angle = 0
  Source counts = 42.7 +/- 27.1
  Background counts = 690.7
  Rate = 0.0007 +/- 0.0005
  Deleting source due to low Poisson probability