[Sat Jun 16 21:01:13 2012] Detection parameters:
  Position = (383.5, 302.1) = 12 9 58.56 39 26 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.5 +/- 14.6
  Background counts = 15.3
  Rate = 0.003 +/- 0.0004

[Sat Jun 16 21:01:14 2012] Off-axis axis estimate = 6.18'
[Sun Jun 17 02:17:07 2012] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 02:17:07 2012] Initial guess for spatial extent in simple fitting = 9.52"
[Sun Jun 17 02:17:07 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.038
[Sun Jun 17 02:17:07 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.52"
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src17.csv
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src17.csv
[Sun Jun 17 04:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jun 17 04:13:58 2012] Fit fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Jun 17 06:08:26 2012] Spatial fit model total counts = 305.592000, observed total counts = 305.000000
[Sun Jun 17 06:08:26 2012] Offset between fit and detection position for source 44 = 0.094353 pixels
[Sun Jun 17 06:08:26 2012] 313.055200 total counts/ 231.890000 bgd. counts: snr = 5.330020
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.094353 pixels
  Position = (383.5, 302.1) = 12 9 58.60 39 26 17.3
  Extent = 5.4 (3.8-7.8)", rotation angle = 0
  Source counts = 81.2 +/- 17.7
  Background counts = 231.9
  Rate = 0.001 +/- 0.0003
[Sun Jun 17 06:08:26 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:26 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 06:08:26 2012] Source does appear to be extended
[Sun Jun 17 06:08:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 10:00:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 17 10:00:19 2012] Initial guess for spatial extent in simple fitting = 5.38"
[Sun Jun 17 10:00:19 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.995
[Sun Jun 17 10:00:19 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 5.38"
[Sun Jun 17 11:30:51 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jun 17 11:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src17.csv
[Sun Jun 17 11:30:51 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jun 17 11:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src17.csv
[Sun Jun 17 11:30:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 11:30:52 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jun 17 11:30:52 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jun 17 11:30:52 2012] Fit fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Jun 17 13:03:05 2012] Spatial fit model total counts = 304.941000, observed total counts = 305.000000
[Sun Jun 17 13:03:05 2012] Offset between fit and detection position for source 44 = 0.008581 pixels
[Sun Jun 17 13:03:05 2012] 312.313200 total counts/ 230.673000 bgd. counts: snr = 5.375337
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.008581 pixels
  Position = (383.5, 302.1) = 12 9 58.59 39 26 17.3
  Extent = 5.5 (3.8-7.8)", rotation angle = 0
  Source counts = 81.6 +/- 17.7
  Background counts = 230.7
  Rate = 0.001 +/- 0.0003
[Sun Jun 17 13:03:05 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:03:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:03:05 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 13:03:05 2012] Source does appear to be extended
[Sun Jun 17 13:03:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 19:46:12 2012] XMMSAS src. selection expression = ellipse(33312.670800, 26235.565600, 331.067410, 331.067410, 0.000000, X, Y)
[Sun Jun 17 19:46:12 2012] Writing source region out to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src44_src.reg
[Sun Jun 17 19:46:12 2012] Extracting stamp from image fullrun_mos1_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (364, 283) - (402, 321)
[Sun Jun 17 19:46:13 2012] XMMSAS bgd. selection expression = annulus(33312.670800, 26235.565600, 551.779016, 1103.558032, X, Y)
[Sun Jun 17 19:46:13 2012] Writing fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src44.gif
[Sun Jun 17 19:57:12 2012] Mean detx,y = (1133.11, -8315.65) 
[Sun Jun 17 19:57:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 19:57:24 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 19:57:24 2012] Setting source spectrum file to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun Jun 17 19:57:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sun Jun 17 20:44:26 2012] Not generating rmf since there are only 81 counts
[Sun Jun 17 20:44:26 2012] rmf not generated due to insufficient counts
[Sun Jun 17 22:37:12 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:12 2012] Error reading totcts from fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun Jun 17 22:37:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:13 2012] Using photon index=1.80, rate=0.00138, arf fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src44.arf
[Sun Jun 17 22:37:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:13 2012] Updating source flux to 2.8e-14
[Sun Jun 17 22:37:17 2012] Source 44 has fewer than 100.000000 counts, skipping spectral fitting