[Sat Jun 16 21:01:12 2012] Detection parameters:
  Position = (247.2, 332.4) = 12 10 49.77 39 28 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1851.8 +/- 58.2
  Background counts = 22.4
  Rate = 0.05 +/- 0.001

[Sat Jun 16 21:01:14 2012] Off-axis axis estimate = 4.46'
[Sun Jun 17 02:17:07 2012] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 02:17:07 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Sun Jun 17 02:17:07 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.766
[Sun Jun 17 02:17:07 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.66"
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src3.csv
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src3.csv
[Sun Jun 17 04:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 17 04:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 17 04:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun 17 04:13:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:26 2012] Warning, spatial fit 3 centroid is now closest to src. 34
[Sun Jun 17 06:08:26 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:26 2012] Assessing source extent using major
[Sun Jun 17 06:08:26 2012] Source does appear to be extended
[Sun Jun 17 06:08:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 10:00:19 2012] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 10:00:19 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Sun Jun 17 10:00:19 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.766
[Sun Jun 17 10:00:19 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.66"
[Sun Jun 17 11:30:51 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 17 11:30:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src3.csv
[Sun Jun 17 11:30:51 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 17 11:30:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src3.csv
[Sun Jun 17 11:30:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 11:30:51 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 17 11:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 17 11:30:51 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 17 11:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 17 11:30:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 13:03:05 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.584261 pixels away
[Sun Jun 17 13:03:05 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:03:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:03:05 2012] Assessing source extent using major
[Sun Jun 17 13:03:05 2012] Source does appear to be extended
[Sun Jun 17 13:03:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 19:46:12 2012] Counts = 1851.805298, rescaling region sizes by 2.000000
[Sun Jun 17 19:46:12 2012] XMMSAS src. selection expression = ellipse(21457.667419, 28866.895721, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 17 19:46:12 2012] Writing source region out to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 17 19:46:12 2012] Extracting stamp from image fullrun_mos1_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (172, 257) - (322, 407)
[Sun Jun 17 19:46:12 2012] XMMSAS bgd. selection expression = annulus(21457.667419, 28866.895721, 4350.000000, 8700.000000, X, Y) && !ellipse(25376.914800, 23898.750400, 1554.364845, 1554.364845, 0.000000, X, Y) && !ellipse(26766.525020, 29644.832600, 1349.412039, 1349.412039, 0.000000, X, Y) && !ellipse(27729.861600, 22611.185200, 384.576011, 384.576011, 0.000000, X, Y) && !ellipse(21924.869379, 22260.313584, 869.598395, 430.941494, 94.720887, X, Y) && !ellipse(23802.339722, 30336.345581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22128.922360, 31155.916600, 496.475214, 496.475214, 0.000000, X, Y) && !ellipse(30635.841600, 31021.141800, 831.656024, 831.656024, 0.000000, X, Y) && !ellipse(14832.529660, 24090.038600, 452.072813, 452.072813, 0.000000, X, Y) && !ellipse(24225.108094, 31575.179200, 372.830411, 372.830411, 0.000000, X, Y) && !ellipse(24805.938141, 32375.960327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23940.401600, 28059.232000, 433.620812, 289.477608, 359.910791, X, Y) && !ellipse(20203.808380, 37661.403400, 445.652013, 278.204808, 158.743000, X, Y) && !ellipse(20941.904083, 32031.642853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28829.627280, 20463.507800, 446.162413, 446.162413, 0.000000, X, Y) && !ellipse(28008.184906, 30934.775909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19181.728000, 38750.128000, 1945.168056, 1945.168056, 0.000000, X, Y) && !ellipse(21750.975400, 30342.908200, 422.664812, 422.664812, 0.000000, X, Y) && !ellipse(13178.257248, 28274.372833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28503.942596, 23087.576630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15414.583200, 26125.056000, 933.512027, 933.512027, 0.000000, X, Y) && !ellipse(27178.788269, 23597.724579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28596.927032, 37220.557770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23316.833099, 22558.402740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12569.524078, 31365.201294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23330.710000, 22281.248000, 1344.712039, 1344.712039, 0.000000, X, Y)
[Sun Jun 17 19:46:12 2012] Writing fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src4.gif
[Sun Jun 17 19:51:59 2012] Mean detx,y = (-5737.20, 1658.43) 
[Sun Jun 17 19:52:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 19:53:27 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 19:53:27 2012] Setting source spectrum file to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 17 19:53:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 17 20:19:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 17 20:19:28 2012] rmf not generated due to insufficient counts
[Sun Jun 17 22:37:12 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:12 2012] Error reading totcts from fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 17 22:37:12 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:12 2012] Using photon index=1.80, rate=0.0469, arf fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src4.arf
[Sun Jun 17 22:37:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:12 2012] Updating source flux to 5.5e-13
[Sun Jun 17 22:37:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting