[Sat Jun 16 21:01:13 2012] Detection parameters:
  Position = (180.0, 331.7) = 12 11 15.00 39 28 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.8 +/- 12.6
  Background counts = 13.6
  Rate = 0.003 +/- 0.0004

[Sat Jun 16 21:01:14 2012] Off-axis axis estimate = 8.91'
[Sun Jun 17 02:17:07 2012] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 02:17:07 2012] Initial guess for spatial extent in simple fitting = 10.89"
[Sun Jun 17 02:17:07 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.998
[Sun Jun 17 02:17:07 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.89"
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src23.csv
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src23.csv
[Sun Jun 17 04:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jun 17 04:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jun 17 04:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Jun 17 04:13:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:26 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 12.919495 pixels away
[Sun Jun 17 06:08:26 2012] Spatial fit model total counts = 199.543000, observed total counts = 200.000000
[Sun Jun 17 06:08:26 2012] Offset between fit and detection position for source 39 = 0.685221 pixels
[Sun Jun 17 06:08:26 2012] Warning, changing simple spatial fit ID from 23 to 61
[Sun Jun 17 06:08:26 2012] 199.676600 total counts/ 164.286000 bgd. counts: snr = 2.761135
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.685221 pixels
  Position = (179.5, 332.0) = 12 11 15.22 39 28 27.2
  Extent = 7.3 (3.5-11.4)", rotation angle = 0
  Source counts = 35.4 +/- 14.1
  Background counts = 164.3
  Rate = 0.0006 +/- 0.0002
[Sun Jun 17 06:08:26 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:26 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 06:08:26 2012] Source does appear to be extended
[Sun Jun 17 06:08:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 06:08:26 2012] Deleting source due to low Poisson probability 0.9