[Sat Jun 16 21:01:13 2012] Detection parameters:
  Position = (274.1, 349.3) = 12 10 39.65 39 29 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.9 +/- 16.3
  Background counts = 25.3
  Rate = 0.004 +/- 0.0005

[Sat Jun 16 21:01:14 2012] Off-axis axis estimate = 4.08'
[Sun Jun 17 02:17:07 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 02:17:07 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Sun Jun 17 02:17:07 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.877
[Sun Jun 17 02:17:07 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.47"
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src10.csv
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src10.csv
[Sun Jun 17 04:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jun 17 04:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jun 17 04:13:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jun 17 04:13:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 06:08:26 2012] Spatial fit model total counts = 397.932000, observed total counts = 334.000000
[Sun Jun 17 06:08:26 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 17 06:08:26 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:26 2012] Assessing source extent using major
[Sun Jun 17 06:08:26 2012] Source does appear to be extended
[Sun Jun 17 06:08:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 10:00:19 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 10:00:19 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Sun Jun 17 10:00:19 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.877
[Sun Jun 17 10:00:19 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.47"
[Sun Jun 17 11:30:51 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jun 17 11:30:51 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jun 17 11:30:51 2012] Fit fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src10 appears to have run properly
[Sun Jun 17 11:30:52 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jun 17 11:30:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jun 17 11:30:52 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jun 17 11:30:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jun 17 11:30:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 13:03:05 2012] Source 33 is offset by -0.207612 and -1.575589 pixels which is larger than
2 X fitted extent = 3.531161 x 0.973586, not incorporating fit results
[Sun Jun 17 13:03:05 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:03:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:03:05 2012] Assessing source extent using major
[Sun Jun 17 13:03:05 2012] Source does appear to be extended
[Sun Jun 17 13:03:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 19:46:12 2012] XMMSAS src. selection expression = ellipse(23802.339722, 30336.345581, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 17 19:46:12 2012] Writing source region out to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src33_src.reg
[Sun Jun 17 19:46:12 2012] Extracting stamp from image fullrun_mos1_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (237, 312) - (312, 387)
[Sun Jun 17 19:46:12 2012] XMMSAS bgd. selection expression = annulus(23802.339722, 30336.345581, 1087.500000, 2175.000000, X, Y) && !ellipse(26766.525020, 29644.832600, 1349.412039, 1349.412039, 0.000000, X, Y) && !ellipse(21457.667419, 28866.895721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22128.922360, 31155.916600, 496.475214, 496.475214, 0.000000, X, Y) && !ellipse(24225.108094, 31575.179200, 372.830411, 372.830411, 0.000000, X, Y) && !ellipse(24805.938141, 32375.960327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23940.401600, 28059.232000, 433.620812, 289.477608, 359.910791, X, Y) && !ellipse(20941.904083, 32031.642853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21750.975400, 30342.908200, 422.664812, 422.664812, 0.000000, X, Y)
[Sun Jun 17 19:46:12 2012] Writing fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src33.gif
[Sun Jun 17 19:54:56 2012] Mean detx,y = (-6282.02, -1122.66) 
[Sun Jun 17 19:54:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 19:55:12 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 19:55:12 2012] Setting source spectrum file to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Jun 17 19:55:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun Jun 17 20:33:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 17 20:33:46 2012] rmf not generated due to insufficient counts
[Sun Jun 17 22:37:12 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:12 2012] Error reading totcts from fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Jun 17 22:37:12 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:12 2012] Using photon index=1.80, rate=0.00375, arf fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src33.arf
[Sun Jun 17 22:37:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:12 2012] Updating source flux to 5.8e-14
[Sun Jun 17 22:37:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting