[Sat Jun 16 21:01:13 2012] Detection parameters:
  Position = (322.5, 356.1) = 12 10 21.48 39 30 13.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.0 +/- 14.1
  Background counts = 19.2
  Rate = 0.002 +/- 0.0004

[Sat Jun 16 21:01:14 2012] Off-axis axis estimate = 4.53'
[Sun Jun 17 02:17:07 2012] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 02:17:07 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Sun Jun 17 02:17:07 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.001
[Sun Jun 17 02:17:07 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.69"
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src32.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src32.csv
[Sun Jun 17 04:13:57 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src32_1.ximg exists
[Sun Jun 17 04:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src32.csv
[Sun Jun 17 04:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sun Jun 17 04:13:58 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sun Jun 17 04:13:58 2012] Fit fullrun_mos1_xmm0112830201_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Sun Jun 17 06:08:26 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 10.187282 pixels away
[Sun Jun 17 06:08:26 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 06:08:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 06:08:26 2012] Assessing source extent using major
[Sun Jun 17 06:08:26 2012] Source does appear to be extended
[Sun Jun 17 06:08:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 10:00:19 2012] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 10:00:19 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Sun Jun 17 10:00:19 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.001
[Sun Jun 17 10:00:19 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.69"
[Sun Jun 17 11:30:51 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src30.ximg exists
[Sun Jun 17 11:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src30.csv
[Sun Jun 17 11:30:51 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun Jun 17 11:30:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src30.csv
[Sun Jun 17 11:30:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 11:30:52 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun Jun 17 11:30:52 2012] fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun Jun 17 11:30:52 2012] Fit fullrun_mos1_xmm0112830201_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sun Jun 17 13:03:05 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 10.196004 pixels away
[Sun Jun 17 13:03:05 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 13:03:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 13:03:05 2012] Assessing source extent using major
[Sun Jun 17 13:03:05 2012] Source does appear to be extended
[Sun Jun 17 13:03:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 19:46:13 2012] XMMSAS src. selection expression = ellipse(28008.184906, 30934.775909, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 17 19:46:13 2012] Writing source region out to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src32_src.reg
[Sun Jun 17 19:46:13 2012] Extracting stamp from image fullrun_mos1_xmm0112830201_pi300-10000_cl_sm2.00.img.gz, (285, 319) - (360, 394)
[Sun Jun 17 19:46:13 2012] XMMSAS bgd. selection expression = annulus(28008.184906, 30934.775909, 1087.500000, 2175.000000, X, Y) && !ellipse(26766.525020, 29644.832600, 1349.412039, 1349.412039, 0.000000, X, Y) && !ellipse(30635.841600, 31021.141800, 831.656024, 831.656024, 0.000000, X, Y)
[Sun Jun 17 19:46:13 2012] Writing fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src32.gif
[Sun Jun 17 20:00:33 2012] Mean detx,y = (-5215.96, -5156.34) 
[Sun Jun 17 20:00:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 20:00:55 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 20:00:55 2012] Setting source spectrum file to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun Jun 17 20:00:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sun Jun 17 20:52:16 2012] Not generating rmf since there are only 90 counts
[Sun Jun 17 20:52:16 2012] rmf not generated due to insufficient counts
[Sun Jun 17 22:37:12 2012] Updating aperture counts using extracted products
[Sun Jun 17 22:37:12 2012] Error reading totcts from fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun Jun 17 22:37:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 22:37:13 2012] Using photon index=1.80, rate=0.0023, arf fullrun_mos1_xmm0112830201_pi300-10000_pass1_cl_src32.arf
[Sun Jun 17 22:37:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 22:37:13 2012] Updating source flux to 3.4e-14
[Sun Jun 17 22:37:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting