[Mon Sep 26 10:21:21 2011] Detection parameters:
  Position = (302.9, 331.4) = 10 38 43.53 53 31 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.8 +/- 22.2
  Background counts = 49.4
  Rate = 0.01 +/- 0.001

[Mon Sep 26 10:21:21 2011] Off-axis axis estimate = 2.41'
[Mon Sep 26 10:23:14 2011] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 10:23:14 2011] Initial guess for spatial extent in simple fitting = 7.63"
[Mon Sep 26 10:23:14 2011] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.836
[Mon Sep 26 10:23:14 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.63"
[Mon Sep 26 10:33:53 2011] fullrun_pn_xmm0112810301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Sep 26 10:33:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112810301_pi300-10000_cl_pass0_src3.csv
[Mon Sep 26 10:33:53 2011] fullrun_pn_xmm0112810301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Sep 26 10:33:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112810301_pi300-10000_cl_pass0_src3.csv
[Mon Sep 26 10:33:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112810301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112810301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 10:33:53 2011] fullrun_pn_xmm0112810301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Sep 26 10:33:53 2011] fullrun_pn_xmm0112810301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Sep 26 10:33:53 2011] Fit fullrun_pn_xmm0112810301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Sep 26 11:05:01 2011] Source 4 is offset by 6.968604 and 5.482999 pixels which is larger than
2 X fitted extent = 4.019683 x 4.019683, not incorporating fit results
[Mon Sep 26 11:05:01 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 11:05:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 11:05:01 2011] Assessing source extent using major
[Mon Sep 26 11:05:01 2011] Source does appear to be extended
[Mon Sep 26 11:05:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 11:05:10 2011] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 11:05:10 2011] Initial guess for spatial extent in simple fitting = 7.63"
[Mon Sep 26 11:05:10 2011] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.836
[Mon Sep 26 11:05:10 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.63"
[Mon Sep 26 11:10:35 2011] fullrun_pn_xmm0112810301_pi300-10000_cl_pass1_src3.ximg exists
[Mon Sep 26 11:10:35 2011] fullrun_pn_xmm0112810301_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Sep 26 11:10:35 2011] Fit fullrun_pn_xmm0112810301_pi300-10000_cl_pass1_src3 appears to have run properly
[Mon Sep 26 11:10:35 2011] fullrun_pn_xmm0112810301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Sep 26 11:10:35 2011] fullrun_pn_xmm0112810301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Sep 26 11:10:35 2011] Fit fullrun_pn_xmm0112810301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Sep 26 11:41:14 2011] Source 4 is offset by -4.015718 and 0.390562 pixels which is larger than
2 X fitted extent = 1.120680 x 1.120680, not incorporating fit results
[Mon Sep 26 11:41:14 2011] Source 4 is offset by 6.881454 and 5.351919 pixels which is larger than
2 X fitted extent = 3.786989 x 3.786989, not incorporating fit results
[Mon Sep 26 11:41:14 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 11:41:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 11:41:14 2011] Assessing source extent using major
[Mon Sep 26 11:41:14 2011] Source does appear to be extended
[Mon Sep 26 11:41:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 11:41:20 2011] XMMSAS src. selection expression = ellipse(26308.124512, 28779.470917, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Sep 26 11:41:20 2011] Writing source region out to fullrun_pn_xmm0112810301_pi300-10000_pass1_cl_src4_src.reg
[Mon Sep 26 11:41:20 2011] Extracting stamp from image fullrun_pn_xmm0112810301_pi300-10000_cl_sm2.00.img.gz, (265, 294) - (340, 369)
[Mon Sep 26 11:41:20 2011] XMMSAS bgd. selection expression = annulus(26308.124512, 28779.470917, 1087.500000, 2175.000000, X, Y) && !ellipse(25899.171200, 27889.972800, 779.992022, 779.992022, 0.000000, X, Y) && !ellipse(25103.240300, 27054.824600, 947.416027, 173.381605, 110.824300, X, Y)
[Mon Sep 26 11:41:20 2011] Writing fullrun_pn_xmm0112810301_pi300-10000_pass1_cl_src4.gif
[Mon Sep 26 11:42:32 2011] Mean detx,y = (560.62, -680.86) 
[Mon Sep 26 11:42:34 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 11:42:50 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 11:42:51 2011] Setting source spectrum file to fullrun_pn_xmm0112810301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Sep 26 11:42:51 2011] Setting bgd. spectrum file to fullrun_pn_xmm0112810301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Sep 26 11:46:50 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Sep 26 11:46:50 2011] rmf not generated due to insufficient counts
[Mon Sep 26 12:03:42 2011] Updating aperture counts using extracted products
[Mon Sep 26 12:03:42 2011] Error reading totcts from fullrun_pn_xmm0112810301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Sep 26 12:03:42 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 12:03:42 2011] Using photon index=1.80, rate=0.0128, arf fullrun_pn_xmm0112810301_pi300-10000_pass1_cl_src4.arf
[Mon Sep 26 12:03:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 12:03:42 2011] Updating source flux to 3.3e-14
[Mon Sep 26 12:03:57 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting